Research on reversible effects and mechanism between the energy-absorbing and energy-reflecting states of chameleon-type building coatings

In the present paper, the reversible effects between energy-absorbing and energy-reflecting states of chameleon-type building coatings were studied through demonstration of the layers’ properties using infrared thermal imaging of the layers when exposed to a sunlamp or temperature measurements of the layers during exposure to sunlight at different ambient temperatures. The reversible transforming mechanism between the energy-absorbing and energy-reflecting states of the chameleon-type building coatings was investigated with IR, Raman and ¹H NMR spectroscopy. The infrared thermal image results showed that when reversibly thermochromic pigments were added to normal white building coatings, the chameleon-type building coatings could absorb energy from the sunlamp below a switching temperature of about 18°C. Absorption of energy from the sunlamp stopped automatically above the switching temperature. The results from exposure to solar radiation showed that when the temperature was below the switching temperature, the chameleon-type building coating could absorb almost the same amount of solar energy as an ordinary coloured coating, and when the temperature was above the switching temperature, the chameleon-type building coating could reflect more solar energy than the ordinary coloured coating. The above results showed that chameleon-type building coatings could contribute to a thermally comfortable building environment. The IR spectroscopy results showed that when the environmental temperature was below the switching temperature of 18°C, the lactone ring of the thermochromic pigment molecule would open and the band of C=O would almost disappear. Raman spectra indicated that the band of C–O in would move to the high wave number range. From ¹H NMR spectra, it could be found that there was some action between the hydrogen of the hydroxyl and the structure of . During the lactone ring opening, the electron in the non-bond orbital would transit to the higher orbital and it could elongate the conjugated bridge, which would produce visible absorption and hence produce an energy-absorbing effect. However, when the environmental temperature was above the switching temperature of 18°C, the lactone ring in the molecule of the thermochromic pigment would close, the transited electron would transit back to the original orbital, hence the visible absorption would disappear, which would make the coating have an energy-reflecting effect.     

燃煤电厂融合多信号光纤火焰检测器的开发研究

介绍一种新型光纤燃煤炉火焰检测器，阐述其系统组成及特点，并提出了基于模糊推理的多信号融合处理方法。     

论科学化包装

从包装的基本功能以及我国食品(商品)包装的现状和存在问题出发,论证了科学化包装势在必行,并提出了科学化包装的具体方法。     

长距离曲线顶管在杭州河坊街工程中的应用

对杭州市重点工程—杭州河坊街长距离曲线顶管进行了总结和介绍 ,可为同类工程借鉴和参考     

变长线扫描选择性激光烧结快速成型工艺的质量和效率优势分析

本文分析变长线扫描选择性激光烧结快速成型工艺对点扫描工艺的质量和效率优势.对二者光学系统结构作分析对比,对焦斑和线束上的功率密度作计算对比.变长线扫描系统采用的扫描方式和聚焦元件使线束宽度小且恒定,线束功率密度与点扫描焦斑的相当.变长线扫描选择性激光烧结快速成型工艺的质量优势是明显的,效率比点扫描工艺提高一倍左右.     

Use of radial forces for fault detection in tapping

A model-based method for fault detection in tapping based on torque and radial forces is proposed. The method allows the identification of faults typical of a tapping operation including axial misalignment, tap runout, tooth breakage both singly and together. The validation experiments have been run on aluminum 356 workpieces for different combinations of process faults. Results have shown that the model predictions are in good agreement with the experimental radial force and torque signals under various fault conditions.     

宽带线性调频信号产主技术研究

本文介绍了采用数字基带产生结合倍频链扩展带宽的方法设计与实现了大带宽线性调频信号产生系统。详细分析研究了实现系统的三项关键技术，给出并分析了相应环节的输出信号。对系统进行了预失真补偿处理，成功实现了ＶＨＦ／ＵＨＦ波段、带宽达３００ＭＨｚ线性调频信号的产生。经脉冲压缩处理，主瓣旁瓣比（ＰＳ１Ｒ）在－３７ｄＢ以下。     

纳米技术与“纳米涂料”之我见

概述了纳米技术、纳米材料、“纳米涂料”的现状 ,重点讨论了纳米技术在涂料中应用遇到的问题和建议措施 ,对纳米技术的科研方向及其在涂料中应用的发展提出了看法。     

中关村中心区水文地质及工程地质特征

本文全面、系统地分析了北京市中关村中心区的水文地质及工程地质特征 ,为该地区的工程建设提供可靠的地质资料     

我国“十五“电力供需预测分析

分析“十五”期间我国电力需求预测和电力预测中的不确定因素,提出建议采取的措施。