Dose and dose-rate dependence of mutation frequency under long-term exposure – a new look at DDREF from WAM model

We have investigated the dependence of the mutation frequency on the dose and dose rate of artificial radiation using the Whack-A-Mole (WAM) model that we recently proposed. In particular, we pay special attention to the case of long-term and low-dose-rate exposure. Our results indicate that the WAM model successfully describes the dose-rate dependence, and it can replace the so-called dose and dose-rate effectiveness factor (DDREF), which has been used for long, to account for the differences between high-dose-rate and low-dose-rate data. The basic properties of the WAM model are discussed with special emphasis on the dose-rate dependence in order to demonstrate how the dose-rate dependence, which is built into the model explicitly, plays a key role. Biological effects of long-term exposure to extremely low-dose-rate radiation are discussed in light of analysis of mega-mouse experiments using the WAM model. In the WAM model, the effects of long-term exposure show a saturation property, thus making it distinctly different from the ‘linear no threshold (LNT)’ hypothesis that predicts a linear increase of the effects with time.     

In situ high-resolution transmission electron microscopy of photocatalytic reactions by excited electrons in ionic liquid

A transmission electron microscope (TEM) sample for observing photocatalysis in a liquid was prepared by using N,N,N-trimetyl-N-propylammonium-bis(trifluoromethanesulfonyl)imide. The ionic liquid (IL) was used as a reaction solvent. Tetrachloroauric acid was dissolved in the IL as gold ion species. Rutile particles were added in the solution as a photocatalyst. The low vapor pressure of the IL enables a diffusing system in high vacuum of TEM. Rutile particles were UV irradiated in that liquid phase. After 3 h UV irradiation, a gold particle of 8 nm diameter was grown on the TiO2 surface. Photonucleation of Au/TiO2 system was discussed from the high-resolution TEM images.     

Rheological flow models of banana peel pectin jellies as affected by sugar concentration

In the present study, peel pectin jellies (PPJ) were isolated from banana peel Musa acuminata Colla (AAA, cv ‘Berangan’) varieties using water bath extraction; five jellies were produced, namely, PPJ_68%, PPJ_70%, PPJ_71%, PPJ_72%, and PPJ_76%. The effect of sugar content on the rheology of the PPJ and commercial fruit jelly was conducted at 25°C within 0.05–100 s^?1 shear rate. Flow behaviour was evaluated on the test dispersions while frequency sweeps (E_a) to obtain the viscoelastic (G’ and G”) were performed on the jellies. PPJ dispersion showed shear thinning flow behaviour, a good fit to the Casson model. Sugar concentration does not affect Casson parameters (K_c, K_oc, ?_ca, and σ_oc). Frequency sweep decreased as viscosity increased which revealed high dependence for both G’ and G”. Tan δ for PPJ was more than unity which showed that jelly has less elastic properties. PPJ with the lowest sugar concentration, PPJ_68%, conducted at a high shear rate showed it was compatible with validation of the Cox–Merz rule.     

Optimization of groove dimensions in herringbone-grooved journal bearings for improved repeatable run-out characteristics

Optimization of groove dimensions in herringbone-grooved journal bearings is discussed in this paper with aims to design precision spindles with improved run-out characteristics. An evaluation index to represent the magnitude of the amplitude of repeatable run-out is firstly introduced and the groove design parameters are theoretically discussed to minimize the index value with taking the stable operation condition of the bearing into account. The comprehensive parameter research reveals a guideline for the design of the groove configuration for good run-out characteristics. Experiments with a shaft with grooves designed along the proposed guideline show that the amplitude of repeatable run-out reduces to about half of that of a bearing with currently designed groove configurations, thus confirming validity of the above guideline.     

Visible-light sensitive hydrogen evolution photocatalyst ZnRh2O4

We investigated the ability of the oxide ZnRh₂O₄ to serve as a solar H₂-evolution photocatalyst due to the predicted potential of its conduction band bottom, which may allow thermodynamically favorable H₂ evolution in spite of its small band-gap of 1.2 eV. ZnRh₂O₄ produced H₂ in the presence of HCHO, but only scarcely in the presence of CH₃OH, indicating that the potential of the valence band top of ZnRh₂O₄ lies at ∼0.1 V (vs. SHE). Thus, the conduction band bottom potential (∼−1.1 V) lies much more negative than the potential of H⁺/H₂, allowing thermodynamically favorable H₂ evolution. In addition, the irradiated-light-wavelength dependence of the quantum efficiency (QE) for H₂ evolution was consistent with the solar spectrum, and the QE was quite high (∼27%), even at a wavelength of 770 ± 25 nm. Taken together, our findings indicate that ZnRh₂O₄ can utilize solar light effectively, not only the entire range of UV and visible light, but is also sensitive to infrared light.     

Analysis of in situ water transport in Nafion by confocal micro-Raman spectroscopy

A proton exchange membrane fuel cell (PEMFC) is a promising alternative source of clean power for automotive applications, but its acceptance in such applications depends on reducing its costs and increasing its power density to achieve greater compactness. To meet these requirements, further improvements in cell performance are required. In particular, when the fuel cell is operating at high current density, the transport of water through the membrane has considerable impacts on the performance because of the large concentration gradient of water between the cathode and anode. Through-plane water permeation across the membrane is therefore a fundamental process in operational PEMFCs. Recently, resistance to water transport at the membrane-gas interface has been reported, and this is affected by the temperature and relative humidity. We investigated the distribution of water inside a proton exchange membrane during a water permeation test by using confocal micro-Raman spectroscopy with a fine spatial resolution (2-3 μm). In the presence of a water flux, the local water content is not necessarily in equilibrium with the water activity in the gas phase. Interfacial water-transport resistance due to the presence of a non-equilibrium membrane structure at the interface cannot be neglected.     

In Vivo Characteristics of Premixed Calcium Phosphate Cements When Implanted in Subcutaneous Tissues and Periodontal Bone Defects

Previous studies showed that water-free, premixed calcium phosphate cements (Pre-CPCs) exhibited longer hardening times and lower strengths than conventional CPCs, but were stable in the package. The materials hardened only after being delivered to a wet environment and formed hydroxyapatite as the only product. Pre-CPCs also demonstrated good washout resistance and excellent biocompatibility when implanted in subcutaneous tissues in rats. The present study evaluated characteristics of Pre-CPCs when implanted in subcutaneous tissues (Study I) and used for repairing surgically created two-wall periodontal defects (Study II). Pre-CPC pastes were prepared by combining CPC powders that consisted of CPC-1: Ca(4)(PO(4))(2)O and CaHPO(4), CPC-2: α-Ca(3)(PO(4))(2) and CaCO(3) or CPC-3: DCPA and Ca(OH)(2) with a glycerol at powder-to-liquid mass ratios of 3.5, 2.5, and 2.5, respectively. In each cement mixture, the Ca to P molar ratio was 1.67. The glycerol contained Na(2)HPO(4) (30 mass %) and hydroxypropyl methylcellulose (0.55 %) to accelerate cement hardening and improve washout resistance, respectively. In Study I, the test materials were implanted subcutaneously in rats. Four weeks after the operation, the animals were sacrificed and histopathological observations were performed. The results showed that all of the implanted materials exhibited very slight or negligible inflammatory reactions in tissues contacted with the implants. In Study II, the mandibular premolar teeth of mature beagle dogs were extracted. One month later, two-wall periodontal bone defects were surgically created adjacent to the teeth of the mandibular bone. The defects were filled with the Pre-CPC pastes and the flaps replaced in the preoperative position. The dogs were sacrificed at 1, 3 and 6 months after surgery and sections of filled defects resected. Results showed that one month after surgery, the implanted Pre-CPC-1 paste was partially replaced by bone and was converted to bone at 6 months. The pockets filled with Pre-CPC-2 were completely covered by newly formed bone in 1 month. The Pre-CPC-2 was partially replaced by trabecular bone in 1 month and was completely replaced by bone in 6 months. Examination of 1 month and 3 month samples indicated that Pre-CPC-2 resorbed and was replaced by bone more rapidly than Pre-CPC 1. Both Pre-CPC pastes were highly osteoconductive. When implanted in periodontal defects, Pre-CPC-2 was replaced by bone more rapidly than Pre-CPC-1.     

Selective dissolution of nanolamellar Ti–41 at.% Al alloy single crystals

The selective dissolution behavior of Ti–41 at.% Al single crystals having a α₂/γ-lamellar structure with a lamellar thickness in the range 20 nm to 1 μm have been investigated in 0.5 M NaCl aqueous solution focusing on the effect of lamellar thickness on the dissolution of γ-lamellae. In the case where γ-lamellae were thicker than ～100 nm on average, γ-lamellae were selectively dissolved and, as a result, crevasses whose widths were close to the γ-lamellae thicknesses were formed. However, not all γ-lamellae were dissolved and the distribution of crevasses was much less uniform compared with that of the γ-lamellae. On the other hand, when the average γ-lamellae thickness was <100 nm relatively thick γ-lamellae were preferentially dissolved, but the distribution of the crevasses was relatively uniform compared with that obtained from the coarse lamellar structure. The reasons for this difference are discussed from the viewpoint of the absence of misfit dislocations in nanoscaled lamellae and the difference in ion transport through crevasses of different width formed by dissolution of γ-lamellae.     

Comparative risk study of hydrogen and gasoline dispensers for vehicles

This paper describes an investigation into the acceptability of installing hydrogen dispensers in public areas based on risk assessments. Because gasoline dispenser risks have been widely accepted for many years, they were used as a benchmark in this study to analyze the risks of hydrogen dispensers. More specifically, we performed risk assessments for both hydrogen and gasoline dispensers and then compared and analyzed the results. We began the process by creating models for both hydrogen and gasoline dispensers that represented their various specifications and elements. Next, potential accident scenarios for each dispenser model were identified by failure mode effect analysis (FMEA) and hazard and operability study (HAZOP). The risks of each scenario were then qualitatively evaluated and the results were organized into risk matrices. By comparing the results of both hydrogen and gasoline dispensers with and without existing safety measures, the appropriateness of their safety measures were validated. Furthermore, by comparing the results of hydrogen and gasoline dispenser safety measures, it was confirmed that the risk levels of the two types were practically equivalent. Therefore, we concluded that the risks involved with installing hydrogen dispensers in public areas can be considered acceptable.