Experimental study of cell pattern formation induced by internal heat sources in a horizontal fluid layer

This study determines the flow structure in a convection cell with an internally heated layer by PIV to elucidate the convection cell transition mechanisms. The vertical velocity component is determined and the cell behaviour with respect to Rayleigh number is investigated quantitatively. Cell expansion process is described as a consequence of development of the descending flow at the centre of cells. The results suggest that a spoke-like structure is stable in this system in ideal conditions and a double-cell structure is formed when there are restrictions on the system, i.e. finite lateral boundaries.     

Combined effects of radon inhalation and antioxidant vitamin administration on acute alcohol-induced hepatopathy in mice

It has been reported that radon inhalation activates antioxidative functions in liver and has an antioxidative effect against hepatopathy similar to that of the antioxidative effects of ascorbic acid (VC) or α-tocopherol (VE). In this study, we examined the combined effects of radon inhalation and antioxidant vitamin administration on acute alcohol-induced hepatopathy in mice. ICR mice were subjected to intraperitoneal (i.p.) administration of alcohol after pretreating with air only (sham) or radon at a concentration of approximately 2000 Bq/m³ for 24 hours and i.p. administration of VC (300 mg/kg body weight) or VE (300 mg/kg body weight). In mice injected with alcohol, the combined radon and antioxidant vitamins treatment significantly decreased the activities of glutamic oxaloacetic transaminase in serum compared to not only the alcohol-administered group (sham group), but also the radon inhalation with alcohol administration group or the vitamin and alcohol administration group. In addition, radon inhalation significantly increased the antioxidant level, in such as the catalase activity and the total glutathione content in liver compared to the sham group. These results suggested that the combined radon and antioxidant vitamin treatment could effectively inhibit alcohol-induced hepatopathy in mice without any antagonizing action.     

Vertical liquid transportation through capillary bundle structure using centrifugal force

The use of three-dimensional (3D) microstructures is becoming essential attempt to develop next generations’ microdevices, to integrate many modules and various functions, and enhance the performance of device. In this paper, we present a new concept for lab on a chip using 3D structure and centrifugal pumping for integrated functional fluid systems such as high-throughput screening, and point of care testing systems which has stacked multiple structures with 3D-interconnection. The use of 3D structure brings many benefits for above high throughput systems, such as possibility to integrate various modules enabling to perform total assay operation, from sample preparation for biochemical reaction and their detection on one platform. For this concept, the most important key technology is control of a vertical valving and transportation of liquid between different 2D micro channel networks with different height levels. We demonstrated such vertical liquid transportation in 3D micro channel networks through the high aspect ratio capillary bundle filter by controlling spinning speed of device and centrifugal force as a pumping force, and confirmed capillary bundle could be employed as vertical microvalve for 3D fluidic systems using centrifugal force as a pumping method.     

Kinetic and morphological study of a magnesium ethoxide‐based Ziegler–Natta catalyst for propylene polymerization

BACKGROUND: Kinetic and morphological aspects of slurry propylene polymerization using a MgCl₂‐supported Ziegler–Natta catalyst synthesized from a Mg(OEt)₂ precursor are investigated in comparison with a ball‐milled Ziegler–Natta catalyst. RESULTS: The two types of catalyst show completely different polymerization profiles: mild activation and long‐standing activity with good replication of the catalyst particles for the Mg(OEt)₂‐based catalyst, and rapid activation and deactivation with severe fragmentation of the catalyst particles for the ball‐milled catalyst. The observed differences are discussed in relation to spatial distribution of TiCl₄ on the outermost part and inside of the catalyst particles. CONCLUSION: The Mg(OEt)₂‐based Ziegler–Natta catalyst is believed to show highly stable polymerization activity and good replication because of the uniform titanium distribution all over the catalyst particles. Copyright © 2008 Society of Chemical Industry     

Phase-transformation and grain-growth kinetics in yttria-stabilized tetragonal zirconia polycrystal doped with a small amount of alumina

Microstructure development during sintering in 3 mol% Y₂O₃-stabilized tetragonal zirconia polycrystal doped with a small amount of Al₂O₃ was investigated in the isothermal sintering conditions of 1300–1500 °C. At the low sintering temperature at 1300 °C, although the density was relatively high, the grain-growth rate was much slow. In the specimen sintered at 1300 °C for 50 h, Y³⁺ and Al³⁺ ions segregated along grain boundaries within the widths of about 10 and 6 nm, respectively. In grain interiors, the cubic-phase regions were formed by not only a grain-boundary segregation-induced phase-transformation mechanism but also by spinodal decomposition. The grain-growth behavior was kinetically analyzed using the grain-size data in 1300–1500 °C, which indicated that the grain-growth rate was enhanced by Al₂O₃-doping. These phase-transformation and grain-growth behaviors are reasonably explained by the diffusion-enhanced effect of Al₂O₃-doping.     

Effect of oxide film on oxygen reduction current for the platinum-cobalt alloy electrodes in PEFC

Effect of surface oxide on Pt-Co alloy electrodes on the oxygen reduction reaction (ORR) was investigated in 0.5 M sulfuric acid solution by electrochemistry, ellipsometry, laser Raman scattering spectroscopy, and XPS. The oxide as thick as 1-2 nm increases the overpotential of ORR and falls down efficiency of PEFC. The thickness of the oxide films is precisely determined by ellipsometry. The oxide film 1.9 nm thick was formed on Pt-50 mol% Co electrode by constant potential oxidation at 1.20 V and the film 1.5 nm thick remains on the electrode at 0.6 V at which ORR already starts. The remaining oxide decreases the current density of ORR and increases the overpotential. On pure Pt electrode, the similar influence of the oxide film was observed.     

Development of systems reliability analysis code SECOM-2 for seismic PSA

An integrated code system SECOM-2, developed at the Japan Atomic Energy Research Institute (JAERI), has the following functions for systems reliability analysis in seismic probabilistic safety assessments (PSAs): (1) calculation of component failure probability, (2) extraction of minimal cut sets (MCSs) from a given fault tree (FT), (3) calculation of frequencies of accident sequences and core damage, (4) importance analysis with several measures with consideration of unique parameters of seismic PSAs, (5) sensitivity analysis, and (6) uncertainty analysis. This paper summarizes the special features of SECOM-2 to perform the analyses mentioned above. At JAERI, using an integrated FT which represents seismically induced core damage due to all initiating events as a system model to calculate core damage frequency of a nuclear power plant, SECOM-2 can calculate conditional point estimate probabilities of system failures, losses of safety functions, and core damage as a function of earthquake motions. The point estimate is computed by a method which gives an exact numerical solution using the Boolean arithmetic model method. As for consideration of correlation of component failure, which has been an important issue in seismic PSAs, a new technique based on direct FT quantification by a Monte Carlo simulation is being added to SECOM-2. Adding this technique, the core damage frequency can be calculated not only with the upper bound approximation based on MCSs but also with a near exact solution taking into account the correlation among all components. This paper also presents the preliminary results of a seismic PSA of a generic BWR plant in Japan performed at JAERI to demonstrate the functions of the SECOM-2 code.     

The separation of fission-product rare elements toward bridging the nuclear and soft energy systems

Based on the present state of the art of the separation technology, recycling of fission-product rare elements (FRE) in the FBR spent fuel is discussed. The rad.-waste fractionation is in accordance with the present society's trend toward zero-emission, and the mean of salt-free method utilizing electrochemistry agrees with the principles of the newly established green chemistry. A catalytic electrolytic extraction method is proposed to separate the target, radioactive but potentially strategic elements, Pd, Ru, Rh, Re (Tc), Te and Se dissolved in the HLLW. It avoids secondary waste arising. This method is particularly feasible for the separation of Pd where cyclic reaction of metal cations such as Pd(II) or Fe(II), acting as promoters or mediators and already contained in HLLW, accelerates the electrochemical deposition of Ru, Rh and Re. Elemental separation not only offers alternative material resources to meet expanding demands for catalysts in Fuel Cell/Soft Energy system but is also the first step for transmutation or other selective strategies for waste management of long-lived fission products (LLFP).     

Observing the Stimulated Raman Gain Spectra of Solutions Using an Infrared Pump Pulse with Narrow Linewidth and a Low-Noise CW Probe Laser

Stimulated Raman gain (SRG) spectroscopy using infrared pump pulses with narrow linewidth and a low-noise cw probe infrared laser was proposed. High-resolution Raman spectra of solutions were obtained. The SRG spectra of crystal GaP, benzene, and toluene were measured to confirm the spectral resolution and sensitivity over the terahertz (THz) region. We discuss the polarization dependence of the spectral measurement of carbon tetrachloride. Our system can detect organic molecules in aqueous solutions.     

Correlation between the hot plate ignition test and other laboratory-scale flammability tests on rubber conveyor belts with fabric skeletons

The hot plate ignition test was conducted on ten different conveyor rubber belts with fabric skeletons. In this test, a 25 × 25 mm² belt sample was placed on a stainless steel plate in an electric furnace and heated. The ‘ignition temperature’ was determined on each sample in almost the same way as proposed in Canada. The test results were compared with those from other laboratory-scale flammability tests (i.e. the small-scale flame tests, the Oxygen Index test and the laboratory-scale gallery test). The calculated results of both sample and rank correlation coefficients imply that the ‘10 signition temperature’ in this hot plate ignition test has a correlation with the results from both the Oxygen Index test and the laboratory-scale gallery test, but that it has very little or no correlation with those from the small-scale flame tests. On the other hand, it is found that the ‘60 s ignition temperature’ in this test has a far better correlation both with the results from the small-scale flame tests and with the time to ignition in the laboratory-scale gallery test than the ‘10 s ignition temperature’.