基于PXI总线舰载光电经纬仪伺服控制系统

为了克服舰船摇摆及风阻力矩干扰所造成舰载光学测量设备跟踪稳定性下降、目标丢失的影响,伺服系统通过接收主控微机提供的船摇信息,将船摇速度校正放大后引入速度回路,实现经纬仪的自稳定跟踪;通过对PXI总线技术进行探讨,分析PXI总线的规范和特点,结合伺服控制器的工作原理和组成,基于PXI总线的FPGA、DSP应用以及外围接口电路设计,大大减小了系统的体积,提高系统集成度、可靠性和稳定性。     

基于PCA和SVM的电磁模板分析攻击

在分析密码芯片电磁辐射数据相关性的基础上,提出了一种基于主成分分析(PCA)技术和多分类支持向量机(SVM)的模板分析密码旁路攻击方法。将密码设备运行时采集到的泄漏的电磁信号经过PCA处理之后作为特征向量,其对应的密钥作为类别,用已知密钥情况下获得的样本训练多分类SVM,用训练好的多分类SVM对未知密钥的电磁信号进行分类,并根据分类结果推测密钥值。实验表明,在用相同多个主成分和训练样本的条件下,SVM的分类效果好于大多数文献上使用的Bayes判别的分类效果。     

基于DSP的光纤捷联惯导系统设计与实现

介绍了一种基于DSP的光纤陀螺捷联惯导系统的设计与实现方法;系统采用DSP+MCU的体系结构,DSP主要完成导航计算,利用单片机实现对数据采集模块的控制,并通过双口RAM实现单片机和DSP的数据通信,构成了一套小型捷联惯导系统,同时给出了一种捷联惯导算法编排,简要介绍了SPI通信和TMS320C6713的二次bootloder方式;经测试,系统速度和精度都满足了设计要求,已应用于实际系统。     

基于CPLD的ARINC429通信板卡设计

ARINC429是航空电子设备之间数据传输的航空工业标准;针对航空电子设备之间的数据传输,介绍了基于CPLD的ARINC429标准通信板卡的硬件组成原理及软件设计;采用C8051F005单片机作为板内CPU来完成控制数据收发和数据处理,在一块板上实现了8收4发的功能,并且带有RS485通信接口,可接收上位机的命令并与其进行交互通信;具有易扩展、实时性好、可靠性高等特点。已在半物理仿真实验系统中成功应用。     

基于TSEOPM的在轨航天器故障预报方法研究

针对在轨航天器非线性系统的故障预报,提出一种基于时间序列事件征兆模式挖掘的在轨航天器故障预报方法,该方法以在轨航天器遥测数据建立状态监测时间序列,根据事件特征函数利用层次聚类算法挖掘出故障事件征兆模式,然后利用故障事件征兆模式对航天器的状态监测时间序列数据进行分析,判断是否为故障征兆点,从而实现故障预报;实验结果表明,该方法能有效地预测在轨航天器状态监测时间序列数据中的故障事件。     

Output feedback control for uncertain linear systems with faulty actuators based on a switching method

This paper investigates the problem of output feedback stabilization for a class of uncertain linear systems with faulty actuators via the synergy with a switching strategy. When actuators suffer a ‘destabilizing failure’ and the never‐faulty actuators cannot stabilize the given system, the closed‐loop exponential stability can still be achieved via the average dwell‐time scheme employing an arbitrary switching signal. The prerequisite condition found requires the ratio between the two lapse times, when the system is devoid of faulty actuators and when it is not so, to be less than a certain specified constant. Then the stabilizing output feedback controls are designed via the technique of linear matrix inequalities. The illustrative example and the respective simulation results demonstrate the feasibility and effectiveness of the proposed design synthesis. Copyright © 2008 John Wiley & Sons, Ltd.     

Aligning Collaborative Business Processes—An Organization-Oriented Perspective

Business collaboration encompasses the coordination of information flows among organizations as well as the composition of their business processes toward mutual benefits. While integrating business processes of different organizations seamlessly, it brings great challenges to keep participating organizations as autonomous entities. To address this issue, we propose a new perspective on modeling collaborative business processes with a novel concept called relative workflow (RWF). With its visibility control mechanism, the RWF model defines what a participating organization can perceive in collaboration and thereby allows each organization to customize its own collaboration process and behaviors. In this paper, we present a formal definition of RWFs and related algorithms for generating RWFs. A prototype is implemented on the Web service platform for the proof-of-concept purpose.     

Tracking control for switched linear systems with time‐delay: a state‐dependent switching method

Tracking control for switched linear systems with time‐delay is investigated in this paper. Based on the state‐dependent switching method, sufficient conditions for the solvability of the tracking control problem are given. We use single Lyapunov function technique and a typical hysteresis switching law to design a tracking control law such that the H_∞ model reference tracking performance is satisfied. The controller design problem can be solved efficiently by using linear matrices inequalities. Since convex combination techniques are used to derive the delay independent criteria, some subsystems are allowed to be unstable. It is highly desirable that a non‐switched time‐delay system can not earn such property. Simulation example shows the feasibility and validity of the switching control law. Copyright © 2009 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Impulsive controller design for singular networked control systems with packet dropouts

This paper considers the problem of impulsive time-delay control for singular networked impulsive control systems(SNICSs) and uncertain SNICSs both with network-induced delay and packet dropouts. The parameter uncertainty is assumed to be norm bounded. The problem to be addressed is the design of robust impulsive time-delay feedback controllers such that the exponential stability of the resulting closed-loop system is guaranteed for admissible uncertainties. By applying Lyapunov function theory and Halanay Lemma, impulsive time-delay controller is derived through solving LMIs. Numerical examples are provided to demonstrate the application of the proposed method.     

基于CPLD的ГOCT18977总线发送卡设计

针对某型俄制机载产品的测试需求,提出了一种ГOCT18977总线发送卡的设计方法介绍了ГOCT18977总线标准和80C196KB单片机、EPM7128LC可编程逻辑器件的使用方法,并利用外围电路和上述芯片设计并实现ГOCT18977总线发送卡,介绍了并口EPP模式下ГOCT18977总线数据的控制过程,给出了ГOCT18977总线发送卡的部分设计电路,并阐述了它的设计原理;实践验证了该板卡能够完成ГOCT18977总线数据信息格式转换和传输,完全可以满足对某型俄制机载产品性能检测的要求.