Biomechanical finite element analysis of bone cemented hip crack initiation according to stem design

The purpose of this investigation was to determine the specific fracture mechanics response of cracks that initiate at the stem-cement interface and propagate into the cement mantle. Two-dimensional finite element models of idealized stem-cement-bone cross-sections from the proximal femur were developed for this study. Two general stem types were considered; Rectangular shape and Charnley type stem designs. The FE results showed that the highest principal stress in the cement mantle for each case occurred in the upper left and lower right regions adjacent to the stem-cement interface. There was also a general decrease in maximum tensile stress with increasing cement mantle thickness for both Rectangular and Charnley-type stem designs. The cement thickness is found to be one of the important fatigue failure parameters which affect the longevity of cemented femoral components, in which the thinner cement was significantly associated with early mechanical failure for shot-time period.     

Patterns of knowledge production: The case of information and telecommunication sector in Korea

In recent years, the topic of knowledge production has been widely investigated in the advanced countries. However, the process by which knowledge is produced in the developing countries has not been fully explored or characterized. In Korea, the science and engineering fields strongly reflect systems of knowledge production in the universities and demonstrate the dynamics of systems of innovation for knowledge production. Through using a case study including data for knowledge production, in the field of information and telecommunication, the following general trends were observed. Firstly, there has been a trend towards increasing the capabilities for knowledge production, via domestic and foreign collaboration. Secondly, there has been an increasing trend towards the diversification of knowledge sources such as university-industry, and university-public research institutes. Finally, the establishment of a nation's knowledge base is influenced by governmental research and development policies. This revised version was published online in August 2006 with corrections to the Cover Date.     

A One‐Kilobit PQR‐CMOS Smart Pixel Array

The photonic quantum ring (PQR) laser is a three dimensional whispering gallery (WG) mode laser and has anomalous quantum wire properties, such as microampere to nanoampere range threshold currents and √T‐dependent thermal red shifts. We observed uniform bottom emissions from a 1‐kb smart pixel chip of a 32×32 InGaAs PQR laser array flip‐chip bonded to a 0.35 µm CMOS‐based PQR laser driver. The PQR‐CMOS smart pixel array, now operating at 30 MHz, will be improved to the GHz frequency range through device and circuit optimization.     

Electrotunable Non‐reciprocal Laser Emission from a Liquid‐Crystal Photonic Device

A liquid crystal (LC) photonic device with an anisotropic optical heterojunction structure has been fabricated. The device has a phase‐retarding nematic LC (NLC) layer sandwiched between two polymer cholesteric LC films with right‐handed helices of different pitches. Electrotunable non‐reciprocal light transmittance and unidirectional circularly polarized (CP) lasing emission have been successfully demonstrated for this device structure. Two left CP (LCP) lasing emission peaks are observed at the edges of the overlapping region between the two photonic bands in the structure and are shifted upon the application of a voltage. In contrast, a non‐reciprocal right CP (RCP) lasing emission peak emerges at one of the band edges and diminishes upon the application of a voltage. These phenomena are interpreted based on the selective reflection of RCP light and the reorientation of the NLC molecules by the application of a voltage.     

A fiber depolarizer using polarization beam splitter loop structure for narrow linewidth light source

A new fiber depolarizer employing a polarization beam splitter loop structure is proposed and demonstrated. The depolarizer is devised for broad-band operation and the depolarization of narrow linewidth light source without any help of polarization controllers or Faraday rotator mirrors. A polarizing method is developed that shows good performance without polarization control unit. Therefore, the proposed depolarizer can be cost-effective and easily configured. From experiments, low output degree of polarization less than 10% is obtained for a narrow linewidth light source.     

Parasitic-aware RF circuit design and optimization

RF circuit synthesis techniques based on particle swarm optimization and adaptive simulated annealing with tunneling are described, and comparisons of parasitic-aware designs of an RF distributed amplifier and a nonlinear power amplifier are presented. Synthesized in 0.35-/spl mu/m digital CMOS using a single 3.3-V power supply, the designs provide an 8-dB gain and 8-GHz bandwidth for a four-stage distributed amplifier, and 1.2-W output power with 55% drain efficiency at 900 MHz for a three-stage power amplifier. A standard circuit simulator, HSPICE or SPECTRE, embedded in an optimization loop is used to evaluate cost functions. The proposed design and optimization methodology is computationally efficient and robust in searching complex multidimensional design spaces.     

Fatigue growth of multiple-cracks near a row of fastener-holes in a fuselage lap-joint

The fatigue growth of multiple cracks, of arbitrary lengths, emanating from a row of fastener holes in a bonded, riveted, lap joint in a pressurized aircraft fuselage is studied. The effects of residual stresses due to a rivet misfit, and of plastic deformation near the hole, are included. A Schwartz-Neumann alternating method which uses the analytical solution for a row of multiple colinear cracks in an infinite sheet (the crack-faces being subject to arbitrary tractions), is developed to analyze this MSD problem on a personal computer. It is found that for a range of crack lengths, a phenomena wherein the shorter cracks may grow faster than longer cracks may exist.     

Microwave induced plasma processing of nuclear waste calcines

Microwave induced plasma processing was used to sinter synthetic Idaho Chemical Processing Plant (ICPP) alumina and zirconia based high level nuclear waste calcines in a nitrogen atmosphere. The microwave densification behaviour of these nuclear waste calcines was observed parallel with identification of the phases formed after sintering. Sintered densities of > 3.20 g cm^–3 were obtained within 10 min of microwave sintering of pure calcines. Glass frit containing calcines showed lower sintering densities (< 2.0 g cm^–3) due to reactions between the frit and volatile substances in both zirconia based and alumina based calcines; prior removal of frit volatiles increased the sintered density. Phases formed in the microwave sintered calcines were identified by X-ray diffraction.