Nanotribology of Si oxide layers on Si by atomic force microscopy

Atomic force microscopy (AFM) has been used for tribological studies of Si surfaces covered by oxide layers of various kinds: chemical oxides prepared by the SC1 (NH4OH/H2O2/H2O) and the SC2 (HCl/H2O2/H2O) treatments and a thermal oxide. In the case of the SC1 chemical oxide, the oxide layer was scratched and the underlying Si substrate was ploughed by the Si3N4 AFM tip. On the other hand, no wear of the sample was noted on the other surfaces: the AFM often produced elevated patterns in the shape of the scanned area, which were no longer visible after HF etching. By annealing the SC1-treated surface in N2 gas at above 200 degrees C for 30 min, the oxide layer could not be scratched any more. By soaking the thermal oxide in KOH, the oxide layer was then scratched. It is concluded that the presence of OH bases is the necessary condition for the nano-scratching of the oxide layers.     

Atomic surface characterisation and modification of the layered compounds Bi2Se3, Bi1.9Sb0.1Se3 and Bi1.6Sb0.4Se3

In this work, we show atomic STM images of the layered compound Bi2Se3. We study the effect in the surface of the substitution of 5% and 20% of the Bi atoms for Sb in Bi1.9Sb0.1Se3 and Bi1.6Sb0.4Se3. The images of the three samples show similar trigonal structures corresponding probably to the van der Waals Se atoms. The distance measured between surface atoms in Bi2Se3 is 4.04 A, in Bi1.9Sb0.1Se3 is 4.16 A and in Bi1.6Sb0.4Se3 is 4.26 A. In Bi1.6Sb0.4Se3 some atomic sites appear brighter than others. The effect is accentuated at higher tunnelling currents and is not observed in the other compounds. Nanoscopic range depressions on the sample might be related to the skeletal crystal structure since the images show atomic corrugations that align slightly in one direction. We explain the results as the effects of the interactions between tip and sample, and discuss two interpretations: on the one hand, localised depression of the individual atomic sites, and on the other the possible elevation of the atoms of the surface due to a phase transition of the compounds induced by STM.     

Numerical prediction of sound generated from flows with a low Mach number

Numerical computations of sound generated from flows with a low Mach number are presented based on Lighthill’s acoustic analogy with an assumption that sound does not alter the flow field from which it is generated. The source fluctuations of the flow field are computed by a large-eddy simulation (LES) with Dynamic Smagorinsky Model (DSM) and they are fed to the following acoustical computation as input data. An explicit/implicit finite element method with second order accuracy both in time and space is used for flow field discretization. The method is applied to the prediction of sound in three different classes of problems: far-field sound generated from flow around a bluff body, sound resulting from blade-stator interaction of turbomachinery and sound due to a turbulent boundary layer on an aerofoil. The computed frequency spectra of the sound show a fairly good agreement with the measured spectra for all the cases.     

Surface acoustic wave based sensors employing ionic liquid for hydrogen sulfide gas detection

This paper describes a new type hydrogen sulfide (H₂S) gas sensor using ionic liquid (IL). In this sensor, a reservoir for the IL was integrated on a surface acoustic wave (SAW) resonator. The IL serves as an absorber for H₂S gas. Mass change due to this absorption is detected as shift in the resonant frequency. In this study, we fabricated and demonstrated the sensor using the lithium niobate (LiNbO₃) SAW resonator with the resonant frequency of 38 MHz. The integrated reservoir was filled by the IL 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim]-[PF₆]). As an experimental result, we observed the linear correlation between the frequency-shift and the exposure time of the sensor to the H₂S gas.     

Reduction of nitric oxide with activated PAN fibres

The reductive removal of nitric oxide from flue gases by reaction with polyacrylonitrile-based active carbon fibres (PAN-ACF) activated with sulphuric acid has been studied at 423–632 K, using a circulating flow reactor. Nitric oxide (0.67 mmol) was completely removed via reduction with 1 g activated carbon under optimum conditions in 210 and 60 min at 423 and 623 K, respectively. N₂ was formed as NO was removed. Some oxygen remained on the carbon surface at 423 K, but was desorbed as CO or CO₂ on subsequent heating to 623 K. The bimolecular reaction of NO reduction over PAN-ACF, and the possible active sites of oxygen surface groups are discussed in the light of a kinetic study and a comparison of the fibre activation at different temperatures.     

Facile one-step route to polyaniline–silver nanocomposite particles and their application as a colored particulate emulsifier

Polyaniline–silver nanocomposites were synthesized in the form of colloidal particles by the facile one-step aqueous chemical oxidative dispersion polymerization of aniline using silver nitrate as an oxidant and poly(vinyl alcohol) as a colloidal stabilizer. Aniline monomer was oxidized by silver ions, yielding polyaniline and elemental Ag simultaneously. The synthesized nanocomposite particles were colloidally stable over 2 years and transmission electron microscopy studies indicated the production of spherical, plate and rod-shaped polyaniline–silver nanocomposite particles with a silver core–polyaniline shell morphology. The conductivity of a pressed pellet of the nanocomposite particles using the conventional four-point probe technique was 1.4 × 10^?2 S/cm at 25 °C. The nanocomposite particles behaved as a ‘colored’ particulate emulsifier for the stabilization of transparent oil-in-water emulsions.     

Predictions of Munsell values with the same perceived lightness at any specified chroma irrespective of hues—Determination of any tonal colors

Simple formulas are proposed for predicting the Munsell value of colors with the same tone (the same values for whiteness‐blackness, perceived lightness, and chroma irrespective of hue). The formulas can be used for any tone. In other words, the method can determine the Munsell value with the same perceived lightness at any specified chroma irrespective of hue. The chromatic strength (CS) function is only used for the derivations. The formulas are very simple, and can be used not only in the colorimetry but also in the color design field. The concept described in this study is that a common CS function can be used for transforming each of the three color attributes (hue, lightness, and chroma) from their uniform color space metric to their corresponding color appearance space attribute. © 2010 Wiley Periodicals, Inc. Col Res Appl, 2011     

Genomics of industrial Aspergilli and comparison with toxigenic relatives

Aspergillus oryzae has been used in Japanese fermentation industries for more than a thousand years. The species produces large amounts of various hydrolytic enzymes and has been successfully applied to modern biotechnology. The size of the A. oryzae genome (37.5 Mb) is very close to that of A. flavus and A. niger, and 20-30% larger than that of either A. nidulans or A. fumigatus. A. oryzae and A. flavus have exactly the same number of aspartic proteinase genes, of which each orthologous pair shares highly conserved amino acid sequences. Synteny analysis with A. fumigatus and A. nidulans showed that the A. oryzae genome has a mosaic structure consisting of syntenic and non-syntenic blocks. In the microorganisms to be compared, the density of the genes having homologs was obviously higher on the syntenic than on the non-syntenic blocks. Expression analysis by the DNA microarray supported the significantly lower expression of genes on the non-syntenic than on the syntenic blocks.     

An extreame disposition method for low-level radioactive wastes using supercritical water (3)

Disposition of low-level radioactive wastes has been performed in supercritical water with RuO₂ as a catalyst without the addition of any oxidizing materials. These wastes arose from nuclear power plants etc., constituting of nonflammable organic materials, such as fire resistant sheeting and rubber gloves. We investigated the distribution behavior of iron and cobalt attached to nonflammable organic materials, in solid, liquid and gas phases during the decomposition of this method. The distributions of these elements under various conditions (initial amounts) were determined by using their radioisotopes as simulated low-level radioactive wastes in order to ease the detection of trace amounts of elements even in solid and gas phases. Iron and cobalt were found only in the solid phase when non-radioactive iron hydroxide was added as a precipitation reagent before the supercritical-water reaction.     

Improved Filtration Performance of Continuous Alumina-fiber-reinforced Mullite Composites for Hot-Gas Cleaning

The effect of filtration layer morphology on filtration performance at 673 K was investigated for continuous alumina-fiber-reinforced mullite composite filters that capture fly ash on their outer surfaces. Two types of filtration layers were prepared on the outer surfaces: a mono-layer consisting of mullite agglomerated particulates and a bi-layer, with mullite whiskers formed by a vapor-phase reaction and strongly adhered to the particulates exposed on the outer surfaces. For filters with mono-filtration layers, the filtration efficiency was improved slightly by increasing the filtration layer thickness. However, the maximum differential pressure increased during the filtration tests. Adhesion of whiskers to the outer surface decreased the maximum differential pressure to about one-third less than that with the mono-filtration layer. This low differential pressure remained constant throughout the duration of the test, with corresponding increases in filtration efficiency.