镍氢电池负极用低成本储氢合金的研究

研究了ABS型储氢合金在低Co含量条件下，随B组元替代元素Co，Al，Si等含量的变化对合金电化学性能的影响规律，同时研究了A组元中不同La／Ce比对合金电化学性能的影响情况。结果表明，随合金中Co含量的降低，合金的活化性能和放电容量得以改善，但合金的循环寿命下降也比较明显；在试验范围内，随Al元素的加入，合金的循环寿命得以改善，但材料的放电容量和活化性能均有所下降；随合金La／Ce比的降低，合金的放电容量略有下降，但其循环寿命和放电电压平台有较大提高。     

Estimation for the number of components in a mixture model using stepwise split-and-merge EM algorithm

The main difficulty with EM algorithm for mixture model concerns the number of components, say g. This is the question of model selection, and the EM algorithm itself could not estimate g. On the contrary, the algorithm requires g to be specified before the remaining parameters can be estimated. To solve this problem, a new algorithm, which is called stepwise split-and-merge EM (SSMEM) algorithm, is proposed. The SSMEM algorithm alternately splits and merges components, estimating g and other parameters of components simultaneously. Also, two novel criteria are introduced to efficiently select the components for split or merge. Experimental results on simulated and real data demonstrate the effectivity of the proposed algorithm.     

Sol-Gel Preparation of LaNiO3 and Its Physical and Chemical Properties

LaNiO3 was synthesized by sol-gel method in which lanthanum nitrate and nickel nitrate were used as start materials and citric acid was used as complex for gel formation.The precursor was dried and subsequently heated at elevated temperature to form the desired product.XRD analysis shows that pure LaNiO3 was synthesized.Electrical conductivity and electrochemical performance of the material were tested.The electrical conductivity decreases from 34.5that there are current peaks in the curve, which is the evidence of the electrochemical activity of LaNiO3.     

分置式牛津型斯特林制冷机的数值分析与实验验证

对分置式牛津型斯特林制冷机进行了数值计算 ,介绍了计算模型考虑到的众多不可逆因素。通过对计算结果与实验结果的对比 ,验证了本文数值计算的准确性 ,说明本文计算模型与数值处理方法是切实可行的     

基于DSP的电力数据采集平台的设计与研究

介绍了一种用于电力系统的数据采集系统.该系统采用数字信号处理器(DSP)和复杂可编程逻辑器件(CPLD)作为核心芯片,给出了主要部分的电路及其原理、功能,系统中使用CPLD实现基本逻辑,使系统有足够的冗余和灵活性,具有可靠性高、可升级等优点.     

Photoluminescence and X-ray Diffraction of Distributed Bragg Reflector

Spectral and structural characteristics of distributed Bragg reflector (DBR) in vertical-cavity surface-emitting lasers were studied with photoluminescence and double- crystal X- ray diffraction measurement. The expected high quality epitaxial DBR structure was verified. In the X- ray double- crystal rocking curves of DBR the zeroth- order peak, the first and second order satellite peaks were measured. Splitting of diffraction peak appeared in the rocking curves was analyzed. The effects of introduced deep energy levels on the structural perfection and optical properties were discussed.     

Distributed Optical Fiber Sensor for Multi-point Temperature Measurement

The distributed optical fiber sensing technology is overviewed, which is based on Raman scattering light theory. Basic operation principle, structure, system characteristics and signal processing are discussed. This structure and method of the signal processing possess of certain spatial resolution, hence will ensure the practicability of system.     

一种改善Turbo乘积编码OFDM系统性能的新方法

本文提出一种利用对译码器软信息限幅来改善多径衰落信道中Turbo乘积编码OFDM(TPC-OFDM)系统性能的新方法。通过对不同多径衰落信道中QPSK映射和16QAM映射的TPC-OFDM系统性能的数值仿真，结果表明在10^-5误比特率下，这种新方法比传统的迭代译码大约有6～10dB的改进，对严重多径环境下TPC-OFDM系统的错误平底也有明显的改进。     

Toughening mechanism for a rubber-toughened epoxy resin with rubber/matrix interfacial modification

For a rubber-toughened piperidine-DGEBA epoxy resin, the interface between the rubber particle and the epoxy resin matrix was modified by an epoxide end-capped carboxyl terminated butadiene and acrylonitrile random copolymer (CTBN). The end-capping epoxides used were a rigid diglycidyl ether of bisphenol-A (Epon 828), a short-chain flexible diglycidyl ether of propylene glycol (DER 736), and a long-chain flexible diglycidyl ether of propylene glycol (DER 732). The microstructures and the fracture behaviour of these rubber-modified epoxy resins were studied by transmission electron microscopy and scanning electron microscopy. Their thermal and mechanical properties were also investigated. In the rubber-modified epoxy resins, if the added CTBNs were end-capped by a flexible diglycidyl ether of propylene glycol (DER 732 or DER 736) before curing, the interfacial zone of the undeformed rubber particle, the degree of cavitation of the cavitated rubber particle on the fracture surface and the fracture energy of the toughened epoxy resin were all significantly increased. The toughening mechanism based on cavitation and localized shear yielding was considered and a mechanism for the interaction between cavitation and localized shear yielding that accounts for all the observed characteristics is proposed.