Light diffusion model for determination of optical properties of rectangular parallelepiped highly scattering media

A method to determine the absorption and reduced scattering coefficients of rectangular parallelepiped highly scattering media from frequency-domain photon migration measurements is presented. An analytical model for photon diffusion propagation in the rectangular parallelepiped media is established using the method of images and extrapolated boundary conditions. This present technique has simplicity, accuracy, and rapid computability as compared with the Monte Carlo or finite element methods. The theoretical predictions are verified with experimental measurements using a white polyacetal resin, and the errors introduced by using the slab geometry for the optical property determination are identified.     

Carbon isotope composition of dissolved humic and fulvic acids in the Tokachi River system

This study reports carbon isotopic ratios (Δ(14)C and δ(13)C) of dissolved humic and fulvic acids in the Tokachi River system, northern Japan. These acids have a refractory feature and they represent the largest fraction of dissolved organic matter in aquatic environments. The acids were isolated using the XAD extraction method from river water samples collected at three sites (on the upper and lower Tokachi River, and from one of its tributaries) in June 2004 and 2005. δ(13)C values were -27.8 to -26.9 ‰ for humic and fulvic acids. On the other hand, the Δ(14)C values ranged from -247 to +26 ‰ and the average values were -170 ± 79 ‰ for humic acid and -44 ± 73 ‰ for fulvic acid. The difference was attributed to the residence time of fulvic acid in the watershed being shorter than that of humic acid. The large variation suggested that humic substances have a different pathway in each watershed environment.     

Radiation safety management of residual long-lived radioactivity distributed in an inner concrete wall of a medical cyclotron room

The depth distribution of residual long-lived radioactivity in the inner concrete wall of a medical cyclotron room was measured by assaying concrete cores. Seven long-lived radioactive nuclides ((46)Sc, (60)Co, (65)Zn, (134)Cs, (152)Eu, (22)Na and (54)Mn) were identified by gamma-ray spectrometry of the concrete samples. It was confirmed that the gamma-ray-emitting radionuclides induced by thermal neutrons through the (n, γ) reaction are dominant, and that the activity induced by thermal neutrons is greater at a depth of 10-30 cm, rather than at the surface of the concrete, and decreased exponentially beyond a depth of ~40 cm. Although the specific activity at the surface was greater than the clearance level for radioactive waste indicated in IAEA RS-G-1.7, the mean specific activities in the walls and floor were less than the clearance level.     

Radiocarbon (14C) diurnal variations in fine particles at sites downwind from Tokyo, Japan in summer

The radiocarbon ((14)C) of total carbon (TC) in atmospheric fine particles was measured at 6 h or 12 h intervals at two sites, 50 and 100 km downwind from Tokyo, Japan (Kisai and Maebashi) in summer 2007. The percent modern carbon (pMC) showed clear diurnal variations with minimums in the daytime. The mean pMC values at Maebashi were 28 ± 7 in the daytime and 45 ± 16 at night (37 ± 15 for the overall period). Those at Kisai were 26 ± 9 in the daytime and 44 ± 8 at night (37 ± 12 for the overall period). This data indicates that fossil sources were major contributors to the daytime TC, while fossil and modern sources had comparable contributions to nighttime TC in the suburban areas. At both sites, the concentration of fossil carbon as well as O(3) and the estimated secondary organic carbon increased in the daytime. These results suggest that fossil sources around Tokyo contributed significantly to the high daytime concentration of secondary organic aerosols (SOA) at the two suburban sites. A comparison of pMC and the ratio of elemental carbon/TC from our particulate samples with those from three end-member sources corroborates the dominant role of fossil SOA in the daytime.     

A novel approach to a fine particle coating using porous spherical silica as core particles

The applicability of porous spherical silica (PSS) was evaluated as core particles for pharmaceutical products by comparing it with commercial core particles such as mannitol (NP-108), sucrose and microcrystalline cellulose spheres. We investigated the physical properties of core particles, such as particle size distribution, flow properties, crushing strength, plastic limit, drying rate, hygroscopic property and aggregation degree. It was found that PSS was a core particle of small particle size, low friability, high water adsorption capacity, rapid drying rate and lower occurrence of particle aggregation, although wettability is a factor to be carefully considered. The aggregation and taste-masking ability using PSS and NP-108 as core particles were evaluated at a fluidized-bed coating process. The functional coating under the excess spray rate shows different aggregation trends and dissolution profiles between PSS and NP-108; thereby, exhibiting the formation of uniform coating under the excess spray rate in the case of PSS. This expands the range of the acceptable spray feed rates to coat fine particles, and indicates the possibility of decreasing the coating time. The results obtained in this study suggested that the core particle, which has a property like that of PSS, was useful in overcoming such disadvantages as large particle size, which feels gritty in oral cavity; particle aggregation; and the long coating time of the particle coating process. These results will enable the practical fine particle coating method by increasing the range of optimum coating conditions and decreasing the coating time in fluidized bed technology.     

A real-time inspection system using a terahertz technique to detect microleak defects in the seal of flexible plastic packages

A method to detect production faults in flexible plastic packages with the use of terahertz radiation is presented. Relying on the large difference between the absorption coefficients of plastic and water (for water-filled channel defects) and on the refraction index difference between plastic and air (for air-filled channel defects), our technique consists of focusing and scanning a terahertz beam on the sealed area of the package, followed by detection of the transmitted signal. Compared with previous methods, such as visual and ultrasound inspection, our technique can be applied to optically opaque packages and does not require immersion in a matching liquid. We tested our system on defects that we fabricated as water-filled and air-filled channels imbedded in polyethylene films, with diameters in the range of 10 to 100 microm. The detection limit (the minimum size of a detectable defect) depends on the conveying speed; this relationship was determined and analyzed. The results show that our system has the potential for application in an actual production line for real-time inspection.     

Environmental contamination and external radiation dose rates from radionuclides released from the Fukushima nuclear power plant

To evaluate the environmental contamination and contributory external exposure after the accident at the Fukushima Nuclear Power Plant (FNPP), the concentrations of artificial radionuclides in soil samples from each area were analysed by gamma spectrometry. Six artificial radionuclides ((131)I, (134)Cs, (137)Cs, (129m)Te, (95)Nb and (136)Cs) were detected in soil samples around FNPP. Calculated external effective doses from artificial radionuclide contamination in soil samples around FNPP were 1.9-2.9 μSv h(-1) (8.7-17.8 mSv y(-1)) in Fukushima city on 22 March 2011. After several months, these calculated external effective doses were 0.25-0.88 μSv h(-1) (2.2-7.6 mSv y(-1)) in Fukushima city on 29 June 2011. The present study revealed that the detected artificial radionuclides around FNPP mainly shifted to long-lived radionuclides such as radioactive caesium ((134)Cs and (137)Cs) even though current levels are decreasing gradually due to the decay of short-lived radionuclides such as (131)I, (129m)Te, (95)Nb and (136)Cs. Thus, radiation exposure potency still exists even though the national efforts are ongoing for reducing the annual exposure dose closer to 1 mSv, the public dose limit. Long-term environmental monitoring around FNPP contributes to radiation safety, with a reduction in unnecessary exposure to the residents.     

Understanding Degradation Mechanisms in SrIrO3 Oxygen Evolution Electrocatalysts: Chemical and Structural Microscopy at the Nanoscale

Designing acid-stable oxygen evolution reaction electrocatalysts is key to developing sustainable energy technologies such as polymer electrolyte membrane electrolyzers but has proven challenging due to the high applied anodic potentials and corrosive electrolyte. This work showcases advanced nanoscale microscopy techniques supported by complementary structural and chemical characterization to develop a fundamental understanding of stability in promising SrIrO₃ thin film electrocatalyst materials. Cross-sectional high-resolution transmission electron microscopy illustrates atomic-scale bulk and surface structure, while secondary ion mass spectrometry imaging using a helium ion microscope provides the nanoscale lateral elemental distribution at the surface. After accelerated degradation tests under anodic potential, the SrIrO₃ film thins and roughens, but the lateral distribution of Sr and Ir remains homogeneous. A layer-wise dissolution mechanism is hypothesized, wherein anodic potential causes the IrO_x-rich surface to dissolve and be regenerated by Sr leaching. The characterization approaches utilized herein and mechanistic insights into SrIrO₃ are translatable to a wide range of catalyst systems.     

Thermodynamic modeling of hydrogen fueling process from high-pressure storage tank to vehicle tank

This study develops a hydrogen fueling station (HFS) thermodynamic model that simulates the actual fueling process in which hydrogen is supplied from a high-pressure (HP) storage tank into a fuel cell electric vehicle (FCEV) tank. To make the model as accurate as possible, we use the same components and specifications as in actual HFSs, such as a pressure control valve, a pre-cooling system, and an FCEV tank. After the components and their specifications are set, pressure and temperature profiles are set as the HP tank supply conditions. Based on the pressure and temperature profiles, the model solves for the temperature, pressure, and mass flow rate of hydrogen at each downstream position, including the inside of the vehicle tank. The values predicted by the model are compared with experimental data, and we show that the developed model makes it possible to accurately simulate those values at any position during the fueling process.