Terpendole E and its Derivative Inhibit STLC‐ and GSK‐1‐Resistant Eg5

Terpendole E is first natural product found to inhibit mitotic kinesin Eg5, but its inhibitory mechanism remains to be revealed. Here, we report the effects of terpendole E and 11ketopaspaline (a new natural terpendole E analogue) on the Eg5–microtubule interaction and in several Eg5 mutants. 11‐Ketopaspaline is a shunt product from terpendole E, and it shows potent inhibitory activity against the microtubule‐stimulated ATPase activity of Eg5. Unlike other Eg5 inhibitors, such as S‐trityl‐L ‐cysteine (STLC) and GSK‐1, both terpendole E and 11‐ketopaspaline only partially inhibited Eg5–microtubule interaction. Furthermore, terpendole E and 11‐ketopaspaline inhibited several Eg5 mutants that are resistant to STLC (Eg5^D130A, Eg5^L214A) or GSK‐1 (Eg5^I299F, Eg5^A356T), but with the same extent of inhibition against wild‐type Eg5. Because Eg5^D130A and Eg5^L214A show cross‐resistance to most known Eg5 inhibitors, which bind the L5 loop, these results suggest that terpendole E and its analogues have a different binding site and/or inhibitory mechanism to those for L5 loop‐binding type Eg5 inhibitors.     

Voltage Control of Static Var Compensator for a Remote System Interconnected by Long‐Distance AC Cables

The voltage variation in a remote system is large when the system is connected by long‐distance AC cables due to the cable capacitance. In Japan, the longest 54‐km 66‐kV AC submarine cable interconnection between the Kyushu mainland and Goto Islands was commissioned in 2005. It was requested to mitigate the voltage variation caused by switching off and on one circuit of the two circuits in the AC cables when a fault occurs. Since the conventional voltage control methods such as transformer tap changer or shunt capacitor and reactor banks are not sufficient because of their slow response time, a static var compensator (SVC) was installed on the Goto Islands. In such an application, an SVC control method should be developed so as not to override the existing voltage control systems. This paper describes the SVC control method developed for the Goto Islands AC interconnection project, which can be applied to similar situations. The effectiveness of the control method was verified by the results of effective value simulation and of field testing, which was implemented before the SVC was commissioned in 2007. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(3): 19–30, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22337     

An Estimation Method to Determine Equivalent Circuit Parameters for Harmonic Analysis

This paper proposes a new estimation method to determine arbitrary circuit parameters for the harmonic analysis of a distribution network. Harmonic analysis is important in maintaining electric power quality. An interesting phenomenon, a temporary cut‐down of the harmonic voltage level at dawn, even if demand is slightly increasing at this time, is often observed in actual power systems. This paper proposes to utilize observations of this phenomenon to estimate circuit parameters. In addition, it is claimed that a detailed equivalent circuit is preferable to a conventional simplified equivalent circuit for explaining the phenomenon. This paper also discusses the usefulness of the Harmonic Characteristics Curve, which is proposed in this paper as a new concept, at the secondary winding of the distribution transformer, and the correlation of PQ, the monitored values of the active and reactive power at the secondary winding of distribution transformer. This correlation should determine the equivalent fundamental frequency admittance of the shunt capacitors installed for distribution lines. © 2014 Wiley Periodicals, Inc. Electr Eng Jpn, 187(1): 16–23, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22451     

An approach to the formal analysis of license interoperability

With recent advances in information and telecommunications technologies, a large range of digital content is distributed over the Internet. Whereas diverse licenses are provided to protect the content legally and have the advantage of offering authors many choices, the obstruction of smooth content distribution may occur if the relationships between licenses are not revealed because of differences between the restrictions imposed by each license. To activate digital content distribution, license interoperability must be revealed. In this paper, we propose a framework for formally examining license interoperability by using many-sorted first-order logic. We formalize five actual licenses and examine their interoperability to prove the effectiveness of our proposed framework. The results show that the framework reveals the relationships between licenses.     

An intermittent control model of flexible human gait using a stable manifold of saddle-type unstable limit cycle dynamics

Stability of human gait is the ability to maintain upright posture during walking against external perturbations. It is a complex process determined by a number of cross-related factors, including gait trajectory, joint impedance and neural control strategies. Here, we consider a control strategy that can achieve stable steady-state periodic gait while maintaining joint flexibility with the lowest possible joint impedance. To this end, we carried out a simulation study of a heel-toe footed biped model with hip, knee and ankle joints and a heavy head-arms-trunk element, working in the sagittal plane. For simplicity, the model assumes a periodic desired joint angle trajectory and joint torques generated by a set of feed-forward and proportional-derivative feedback controllers, whereby the joint impedance is parametrized by the feedback gains. We could show that a desired steady-state gait accompanied by the desired joint angle trajectory can be established as a stable limit cycle (LC) for the feedback controller with an appropriate set of large feedback gains. Moreover, as the feedback gains are decreased for lowering the joint stiffness, stability of the LC is lost only in a few dimensions, while leaving the remaining large number of dimensions quite stable: this means that the LC becomes saddle-type, with a low-dimensional unstable manifold and a high-dimensional stable manifold. Remarkably, the unstable manifold remains of low dimensionality even when the feedback gains are decreased far below the instability point. We then developed an intermittent neural feedback controller that is activated only for short periods of time at an optimal phase of each gait stride. We characterized the robustness of this design by showing that it can better stabilize the unstable LC with small feedback gains, leading to a flexible gait, and in particular we demonstrated that such an intermittent controller performs better if it drives the state point to the stable manifold, rather than directly to the LC. The proposed intermittent control strategy might have a high affinity for the inverted pendulum analogy of biped gait, providing a dynamic view of how the step-to-step transition from one pendular stance to the next can be achieved stably in a robust manner by a well-timed neural intervention that exploits the stable modes embedded in the unstable dynamics.     

Texture,sensory and swallowing characteristics of high-pressure-heat-treated pork meat gel as a dysphagia diet

To develop a soft meat product for a dysphagia diet, high-pressure technology was applied. Pressure-heat-treated ground pork meat (PH) was prepared from ground pork mixed with water (ground meat: water, 1:0.5 or 1:1) and salt (1.5%). PH-gels were made from these meat homogenates by treatment at 400 MPa for 20 min, followed by heat treatment. Heat-treated pork meat homogenates (H) were also prepared. The hardness and adhesiveness of the 1:1PH-gel was lower than those of the 1:1H-gel. The PH-gel scored higher in sensory evaluations of elasticity, smoothness and ease of swallowing. Scanning electron micrographs indicated that the superior textural property of the 1:1PH-gel was caused by a network of myosin filaments. Videofluoroscopic examination of swallowing revealed that the 1:1PH-gel was easy to swallow and left little residue in the oropharynx. These results proved the utility of pressurization in creating a dysphagia meat diet.     

Immunomodulatory Properties and Osteogenic Activity of Polyetheretherketone Coated with Titanate Nanonetwork Structures

Polyetheretherketone (PEEK) is a potential substitute for conventional metallic biomedical implants owing to its superior mechanical and chemical properties, as well as biocompatibility. However, its inherent bio-inertness and poor osseointegration limit its use in clinical applications. Herein, thin titanium films were deposited on the PEEK substrate by plasma sputtering, and porous nanonetwork structures were incorporated on the PEEK surface by alkali treatment (PEEK-TNS). Changes in the physical and chemical characteristics of the PEEK surface were analyzed to establish the interactions with cell behaviors. The osteoimmunomodulatory properties were evaluated using macrophage cells and osteoblast lineage cells. The functionalized nanostructured surface of PEEK-TNS effectively promoted initial cell adhesion and proliferation, suppressed inflammatory responses, and induced macrophages to anti-inflammatory M2 polarization. Compared with PEEK, PEEK-TNS provided a more beneficial osteoimmune environment, including increased levels of osteogenic, angiogenic, and fibrogenic gene expression, and balanced osteoclast activities. Furthermore, the crosstalk between macrophages and osteoblast cells showed that PEEK-TNS could provide favorable osteoimmunodulatory environment for bone regeneration. PEEK-TNS exhibited high osteogenic activity, as indicated by alkaline phosphatase activity, osteogenic factor production, and the osteogenesis/osteoclastogenesis-related gene expression of osteoblasts. The study establishes that the fabrication of titanate nanonetwork structures on PEEK surfaces could extract an adequate immune response and favorable osteogenesis for functional bone regeneration. Furthermore, it indicates the potential of PEEK-TNS in implant applications.     

Predator Avoidance by Phytophagous Mites is Affected by the Presence of Herbivores in a Neighboring Patch

When predators invade a leaf patch inhabited by herbivores, the herbivores disperse to a neighboring predator-free leaf patch, thus escaping from the predators. However, the neighboring patch might already be used by con- or heterospecific herbivores. We used laboratory bioassays to examine whether perception of odor from con- or heterospecific competitors on a neighbored lima bean leaf patch influences dispersal behavior of the herbivorous mite Tetranychus urticae when attacked by predatory mites Phytoseiulus persimilis. The dispersal rates of T. urticae that perceived odors from leaf patches infested by conspecifics or cowpea aphids (Aphis craccivora) did not differ from the control (the dispersal rate of T. urticae that perceived odor from uninfested leaf patches). By contrast, the dispersal rate of T. urticae was reduced when they perceived odors from leaf patches that were currently or had previously been infested by larvae of the common cutworm (Spodoptera litura). Previous herbivory by S. litura larvae induced resistance in leaf patches to T. urticae as indicated by the reduced number of eggs laid by T. urticae. Our results are discussed with respect to the feeding behavior of the tested competitors of T. urticae and the impact of the plant and arthropod community on the dispersal behavior of these mites.     

Applications of microstructures fabricated by proton beam writing to electric-micro filters

Fabrication of high-aspect-ratio microstructures was performed by proton beam writing (PBW) using a microbeam line at Takasaki Ion Accelerators for Advanced Radiation Application (TIARA), JAEA Takasaki, JAPAN. As one of the applications of the high-aspect-ratio structures micro-machined by PBW, we utilized the high-aspect pillars for electric-micro filters of microbes such as Escherichia coli and Yeast based on the dielectrophoretic force. The filter is equipped with high-aspect pillars with a height of ～20 μm and a diameter of ～1 μm on a glass plate. Evaluation of the dielectrophoresis (DEP) device for capturing E. coli and Yeast was made using either observation by optical microscope or photoluminescence (PL) measurements.