Development of an anisotropic conductive adhesive film (ACAF) from epoxy resins

A thermoset type anisotropic conductive adhesive film (ACAF), which electrically connects an ITO glass and a flex circuit both having conducting pattersn of less than 100 μm in pitch, has been developed. In this development, bisphenol A and bisphenol F epoxy resins were tested to formulate an ACAF with easy-to-handle tackiness, flexibility, and strenght. A curing agent that gives fast cure and long shelf-life properties to the epoxy resin was also selected. The tensile stress–strain responses of obtained adhesive films were successfully used for determining the formulation. Good aftercure physical properties (electrical and mechanical) were obtained. Durability against high temperature and high humidity were also tested to confirm long-term stability of the conduction of this ACAF. © 1995 John Wiley & Sons, Inc.     

Fate of the chlorine and fluorine in a sub-bituminous coal during pyrolysis and gasification

The fate of the chlorine and fluorine present in a sub-bituminous coal from Indonesia during pyrolysis and gasification has been studied with fixed and entrained bed reactors. The rate profile for HCl evolved in the temperature programmed pyrolysis exhibits the main and shoulder peaks at 480 and 600 °C, respectively. Model experiments and subsequent Cl 2p XPS measurements show that HCl reacts with metal impurities and carbon active sites at 500 °C to be retained as inorganic and organic chlorine forms, from which HCl evolves again at elevated temperatures. It is suggested that the HCl observed in the coal pyrolysis may originate from the above-mentioned chlorine functionalities formed by secondary reactions involving the nascent char. In the CO₂ gasification of the 900 °C char at 1000 °C and 2.5 MPa, any measurable amounts of HCl and HF could not be detected even at a high conversion of 75 wt% (daf), suggesting the accumulation of these halogens in the residual char. When the coal is injected into an O₂-blown, entrained bed gasifier at 1200-1400 °C under 2.6 MPa, the partial oxidation proceeds to a larger extent at a higher O₂/coal ratio, whereas the chlorine and fluorine are enriched in the remaining char, and the extent of the enrichment at the latter stage of gasification is larger with the fluorine. The XPS measurements of the chars reveal the presence of the broad F 1 s peak, which can cover a wide range of binding energies attributable to inorganic and organic fluorine. The halogen enrichment during gasification is discussed in terms of secondary reactions of HCl and HF with char.     

Effect of alkali and alkaline earth metals on nitrogen release during temperature programmed pyrolysis of coal

Formation of HCN, NH₃, and N₂ during fixed-bed pyrolysis at 10K min⁻¹ has been studied using coal samples after partial demineralization followed by addition of metal hydroxides from aqueous systems. Without additives, NH₃ is the predominant product at ≤ 700°C, showing the two peaks in the formation rate profile, whereas N₂ is the only product at ≥ 800°C. The presence of NaOH, KOH and Ca(OH)₂ promotes considerable NH₃ formation between 450 and 600°C, but in contrast suppresses HCN formation in this region. The Ca shows the largest effect on both the promotion and suppression. It is likely that the NH₃ increased by Ca addition arises partly from HCN, but mainly from secondary reactions of tar-N. These hydroxides affect N₂ formation in quite different manners: the Na decreases the rate between 700 and 950°C, and the K changes it less significantly than the Na, but the Ca remarkably increases the rate in a low temperature region of 550–700°C. These different features are discussed in terms of solid-phase reactions of alkali metal carbonates with char-N and secondary decomposition reactions of tar-N on CaO particles. As a result, total conversion of coal-N to HCN, NH₃ and N₂ up to 1000°C increases in the sequence of Na < none < K < Ca.     

Sintering of Ceria-Doped Tetragonal Zirconia Crystallized in Organic Solvents, Water, and Air

Amorphous CeO₂–ZrO₂ gels were prepared by coprecipitation in ammonia solutions. The onset of crystallization of the gels, from calcining in air, was 420°C, while 200° to 250°C in the presence of water and organic solvents such as methanol and ethanol. The sintering behaviors of CeO₂–ZrO₂ powders were sensitive to the crystallizing conditions, since hard agglomerates formed when the precipitated gels were crystallized by normal calcination in air, whereas soft agglomerates formed when they were crystallized in water or organic solvents. CeO₂–ZrO₂ powders crystallized in methanol and water at 250°C were sintered to full theoretical density at 1150° and 1400°C, respectively, whereas that crystallized by calcination in air at 450°C was sintered to only 95.2% of theoretical density, even at 1500°C.     

Unified reliability estimation and management of NoC based chip multiprocessors

We present a new architecture level unified reliability evaluation methodology for chip multiprocessors (CMPs). The proposed reliability estimation (REST) is based on a Monte Carlo algorithm. What distinguishes REST from the previous work is that both the computational and communication components are considered in a unified manner to compute the reliability of the CMP. We utilize REST tool to develop a new dynamic reliability management (DRM) scheme to address time-dependent dielectric breakdown and negative-bias temperature instability aging mechanisms in network-on-chip (NoC) based CMPs. Designed as a control loop, the proposed DRM scheme uses an effective neural network based reliability estimation module. The neural-network predictor is trained using the REST tool. We investigate how system’s lifetime changes when the NoC as the communication unit of the CMP is considered or not during the reliability evaluation process and find that differences can be as high as 60%. Full-system based simulations using a customized GEM5 simulator show that reliability can be improved by up to 52% using the proposed DRM scheme in a best-effort scenario with 2–9% performance penalty (using a user set target lifetime of 7 years) over the case when no DRM is employed.     

Morphological study by TEM on uniaxially oriented thin films of PET, PEN and their blends

Uniaxially oriented thin films of poly(ethylene terephthalate) (PET), poly(ethylene 2,6-naphthalene dicarboxylate) (PEN) and their blends were prepared by applying shear strain to their respective melts, and the resulting morphologies were studied by transmission electron microscopy. Selected-area electron diffraction of each film revealed well-defined uniaxial orientation of polymer chains in the shearing direction. In the uniaxially oriented thin film of PEN, stacked-lamellar structure with the average long period of 27 nm consisting of a crystalline region about 15 nm thick and an amorphous one about 12 nm thick was found here and there in the dark-field image: PEN-type. On the other hand, stacked-lamellar structure was rarely observed in the case of PET: PET-type. In PET/PEN blends, the morphologies changed from the PET-type to the PEN-type with increasing content of PEN.     

A multi-objective strategy in genetic algorithms for gene selection of gene expression data

A microarray machine offers the capacity to measure the expression levels of thousands of genes simultaneously. It is used to collect information from tissue and cell samples regarding gene expression differences that could be useful for cancer classification. However, the urgent problems in the use of gene expression data are the availability of a huge number of genes relative to the small number of available samples, and the fact that many of the genes are not relevant to the classification. It has been shown that selecting a small subset of genes can lead to improved accuracy in the classification. Hence, this paper proposes a solution to the problems by using a multiobjective strategy in a genetic algorithm. This approach was tried on two benchmark gene expression data sets. It obtained encouraging results on those data sets as compared with an approach that used a single-objective strategy in a genetic algorithm. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Selecting informative genes from microarray data by using hybrid methods for cancer classification

Gene expression technology, namely microarrays, offers the ability to measure the expression levels of thousands of genes simultaneously in biological organisms. Microarray data are expected to be of significant help in the development of an efficient cancer diagnosis and classification platform. A major problem in these data is that the number of genes greatly exceeds the number of tissue samples. These data also have noisy genes. It has been shown in literature reviews that selecting a small subset of informative genes can lead to improved classification accuracy. Therefore, this paper aims to select a small subset of informative genes that are most relevant for cancer classification. To achieve this aim, an approach using two hybrid methods has been proposed. This approach is assessed and evaluated on two well-known microarray data sets, showing competitive results. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Refined mapping of a gene responsible for Fukuyama-type congenital muscular dystrophy: evidence for strong linkage disequilibrium

Fukuyama-type congenital muscular dystrophy (FCMD), the second most common form of childhood muscular dystrophy in Japan, is an autosomal recessive severe muscular dystrophy associated with an anomaly of the brain. After our initial mapping of the FCMD locus to chromosome 9q31-33, we further defined the locus within a region of approximately 5 cM between loci D9S127 and CA246, by homozygosity mapping in patients born to consanguineous marriages and by recombination analyses in other families. We also found evidence for strong linkage disequilibrium between FCMD and a polymorphic microsatellite marker, mfd220, which showed no recombination and a lod score of (Z) 17.49. A "111-bp" allele for the mfd220 locus was observed in 22 (34%) of 64 FCMD chromosomes, but it was present in only 1 of 120 normal chromosomes. This allelic association with FCMD was highly significant (chi 2 = 50.7; P < .0001). Hence, we suspect that the FCMD gene could lie within a few hundred kilobases of the mfd220 locus.