Enhancing heat transfer ability of drag reducing surfactant solutions with static mixers and honeycombs

Solutions containing drag reducing additives also show reduced heat transfer which limits their use in district heating and cooling recirculation systems where heat exchange is critical. In this study, static mixers A and B and honeycombs were installed at the entrance to a heat exchanger to break the solution microstructure temporarily and thereby enhancing their heat transfer ability when passing through the heat exchanger. The effectiveness of the destructive devices in enhancing the heat transfer ability of drag reducing cationic and mixed zwitterionic/anionic surfactant solutions was investigated together with the microstructure recovery time and pressure drop penalty paid for the heat transfer enhancement.     

Attenuated total reflection surface-enhanced infrared absorption microspectroscopy for identification of small thin layers on material surfaces

Attenuated total reflection surface-enhanced infrared absorption microspectroscopy (micro-ATR-SEIRA) was developed for the identification of sub-mm size and nm-thick layers on material surfaces by using gold island films deposited on the surface of micro-ATR crystals. A thin layer of triphenyl phosphate (TPP) on a poly(tetrafluoroethylene) (PTFE) membrane filter was used to evaluate the enhancement of the absorption bands. Three types of crystals: diamond, silicon, and germanium, were evaluated. Diamond gave the greatest enhancement with a 12 nm thick gold island film. The enhancement factor was 200 times compared to bare diamond crystal, whereas it was 10 times for germanium crystal. This variation of enhancement factor according to crystal types was presumed to be due to the morphology of the gold films on the crystals. We also obtained an enhanced ATR map over an area of approximately 2 x 6 mm for a thin layer (approximately 1 nm thick) of di-2-ethylhexylphthalate on PTFE using gold-coated hexagonal silicon micro-ATR crystals. This micro-ATR-SEIRA technique has major potential for analyzing small and thin substances on material surfaces.     

A 20 GHz Steerable Array Antenna Using 3-bit Dielectric Slab Phase Shifters on a Coplanar Waveguide

A simple steerable array antenna is designed and developed using a movable dielectric phase shifter. The change of effective dielectric constant at different dielectric slab positions on a coplanar waveguide is used as the phase shifter. The impedance matching and desired phase shift conditions are satisfied at two slab heights, and the reflection is designed to be minimized at these slab positions. The low-loss dielectric material is used as the dielectric slab and is placed close to a coplanar transmission line with airgap. The 4times4 steerable array antenna with the phase shifters is designed and fabricated at 20 GHz. The H-plane radiation patterns are measured at different phase shift positions and compared with the expected results     

Tele-immersive environment with tiled display wall for intuitive remote collaborative work

In remote collaborative work via WAN, sharing and recognizing various high-quality visual contents such as photography, visualization image, and real video streaming is extremely important. Supporting a high-quality display of these contents on a large-scale display system is necessary to support intellectual remote collaborative work. However, these contents are currently magnified in low resolution on a general projector used as large-sized display equipment, and these equipments are difficult to display the contents with sufficient quality. In this paper, we have focused on the tiled display wall technology which configure a wide-area screen with two or more LCD and tried to display realistic high-resolution visual contents to solve these issues. We have constructed a tele-immersive environment with a tiled display wall, and have studied the availability for intuitive remote collaborative work by implementing various collaborative applications for the effective display of high-resolution contents as well as developing interaction techniques for enormous visual contents in this environment. As a result, we have showed that the practical use of a tiled display wall is useful in the construction of intellectual remote collaborative environment.     

Colorectal Laterally Spreading Tumors by Computed Tomographic Colonography

To date, few reports focused primarily on detecting colorectal laterally spreading tumors (LSTs) have been published. The aim of this study was to determine the visibility of LSTs on computed tomographic colonography (CTC) compared with that on colonoscopy as a standard. We retrospectively reviewed and matched data on endoscopic and CTC reports in 157 patients (161 LSTs) who received a multidetector CT scan using contrast media immediately after total colonoscopy at the National Cancer Center Hospital in Tokyo, Japan, between December 2005 and August 2010. The results of the total colonoscopy were known at the time of the CTC procedure and reading. Of the 161 LSTs detected on colonoscopy, 138 were observed and matched by CTC (86%). Of the 91 granular type LSTs (LST-Gs), 88 (97%) were observed and matched, while of the 70 non-granular type LSTs (LST-NGs), 50 (71%) were observed and matched by CTC (p < 0.0001). CTC enabled observation of 73% (22/30) of 20–29 mm, 83% (35/42) of 30–39 mm, 88% (49/56) of 40–59 mm, and 97% (32/33) of ≥60 mm tumors. The rate of observed LSTs by CTC was 86% (97% of LST-G, 71% of LST-NG) of the LSTs found during total colonoscopy.     

PREPARATION AND PERMEABILITY CONTROL OF ELECTRO-SENSITIVE MICROCAPSULES WITH IMMOBILIZED FERROELECTRIC LIQUID CRYSTALLINE SEGMENTS

Nylon-polystyrene microcapsules with immobilized ferroelectric liquid crystalline segments were prepared, and the permeability control of the encapsulated core material was investigated under an external electric field. A ferroelectric liquid crystal monomer possessing both mesogenicity and chirality effectively responded to an external electrical field. Permeation of the material (oxprenolol) contained in the inner aqueous core of the microcapsules was enhanced under a feeble electric field (2 V). Furthermore, it was found that the permeability of the microcapsules without the ferroelectric liquid crystal group did not depend on the external electrical field. In order to clarify the controlled release mechanism of the core material, the transmittance was quantitatively evaluated under an external electric field using a handmade polarized light transmittance apparatus.     

Intestinal absorption and biological effects of orally administered amorphous silica particles

Although amorphous silica nanoparticles are widely used in the production of food products (e.g., as anticaking agents), there is little information available about their absorption and biological effects after oral exposure. Here, we examined the in vitro intestinal absorption and in vivo biological effects in mice of orally administered amorphous silica particles with diameters of 70, 300, and 1,000 nm (nSP70, mSP300, and mSP1000, respectively) and of nSP70 that had been surface-modified with carboxyl or amine groups (nSP70-C and nSP70-N, respectively). Analysis of intestinal absorption by means of the everted gut sac method combined with an inductively coupled plasma optical emission spectrometer showed that the intestinal absorption of nSP70-C was significantly greater than that of nSP70. The absorption of nSP70-N tended to be greater than that of nSP70; however, the results were not statistically significant. Our results indicate that silica nanoparticles can be absorbed through the intestine and that particle diameter and surface properties are major determinants of the degree of absorption. We also examined the biological effects of the silica particles after 28-day oral exposure in mice. Hematological, histopathological, and biochemical analyses showed no significant differences between control mice and mice treated with the silica particles, suggesting that the silica nanoparticles evaluated in this study are safe for use in food production.     

Determination of the Temperature Coefficient Distribution of Dielectric Ceramics Using Scanning Photothermal Dielectric Microscopy

Two-dimensional images of the distribution showing the temperature coefficient of the dielectric constant for two types of two-phase composite ceramics composed of TiO₂-Bi₂Ti₄O₁₁ and BaTi₄O₉-BaPr₂Ti₄O₁₂ were obtained using scanning photothermal dielectric microscopy. The images of the TiO₂-Bi₂Ti₄O₁₁ ceramic showed that the TiO₂ and Bi₂Ti₄O₁₁ grains had negative and positive temperature coefficients, respectively, and that the macroscopic averaged temperature coefficient of the ceramic was relatively low because of the cancellation of the opposite signs of the coefficients. On the other hand, the images of the BaTi₄O₉-BaPr₂Ti₄O₁₂ ceramic showed that the temperature coefficient of both grains had the same sign (negative), although their absolute values were quite different.