Simultaneous determination of ozone and carbonyls using trans-1,2-bis(4-pyridyl)ethylene as an ozone scrubber for 2,4-dinitrophenylhydrazine-impregnated silica cartridge

A new method for the simultaneous determination of ozone and carbonyls in air using a two-bed cartridge system has been developed. Each bed consists of reagent-impregnated silica particles. The first contains trans-1,2-bis-(4-pyridyl) ethylene (BPE) while the second contains 2,4-dinitrophenylhydrazine (DNPH). Air samples are drawn through the cartridge first through the BPE and then through the DNPH. Ozone in the air sample is trapped in the first bed by the BPE-coated silica particles and produce pyridine-4-aldehyde. Airborne carbonyls pass unimpeded thorough the BPE and are trapped in the second bed by the DNPH-coated silica particles. They produce carbonyl 2,4-DNPhydrazones. DNPH and carbonyl 2,4-DNPhydrazones are not influenced by ozone because of effective trapping by the BPE. Extraction is performed in the direction reverse to air sampling. When solvent is eluted through the BEP/DNPH cartridge, excess DNPH is washed into the BPE bed where it reacted with pyridine-4-aldehyde and forms the corresponding hydrazone derivative. All of the hydrazones derived from airborne carbonyls and pyridine-4-aldehyde (derived from ozone) are completely separated and measured using high-performance liquid chromatography. An Ascentis RP-Amide column is used, and the mobile phase is 40% aqueous acetonitrile containing 2 mmol/L ammonium acetate. The use of a BPE/DNPH cartridge has made possible the simultaneous determination of ozone and carbonyls. A separate ozone scrubber is not necessary with the BPE/DNPH cartridge because the BPE portion of the sampler serves this function.     

Spin Injection Processes in ZnSe-Based Double Quantum Dots of Diluted Magnetic Semiconductors

Spin injection processes in the double quantum dots of ZnSe-based diluted magnetic semiconductors are discussed. Double quantum dots are fabricated from ZnSe-based double quantum wells by electron beam lithography and wet etching. In these samples, the photo-excited carriers in the magnetic dots are injected into the non-magnetic dots. The circular polarization degrees of photoluminescence from the non-magnetic dots are measured by micro-photoluminescence measurement system under the magnetic field up to 5 T. The maximum spin polarization degrees of injected carriers determined from our experiment are 10% for double quantum wells and 15% for double quantum dots. The spin injection efficiency was estimated both from the observed circular polarization degree and the diffusion length of carriers. We concluded that the spin injection efficiency is increased in the double quantum dots.     

Dynamic behavior of bubble domains at low drive field

Dynamic properties of bubble domains at low drive pulse field are examined by the bubble transport method. Important findings are as follows. 1) The bubble does not move unless the pulse duration exceeds a critical value which depends on the pulse amplitude. 2) A minimum pulse amplitude is also required for the bubble translation which depends on the pulse duration. 3) As the pulse duration goes to infinity, the minimum drive field approaches a constant value which is different from the dynamic coercivity. 4) As soon as the pulse duration exceeds the critical value, the bubble is displaced discontinuously by a finite distance independent of the drive field. All of these properties are adequately explained by a simple phenomenological theory, in which the domain wall is assumed to be connected by springs to pinning sites until the wall is displaced by a finite distance.     

Quantum Phase Transition in the Infinite Dimensional Hubbard Model

We investigated the ground state of the infinite dimensional Hubbard model for both attractive and repulsive interactions by applying Gutzwiller type variational wave functions. Our variational wave functions have lower energies than the simple BCS wave function for the attractive case, and lower energies than the Brinkman-Rice state for the repulsive case. We found that the system has several phases depending on the density of electrons and the interaction strength. Investigated phases include antiferromagnetic, Fermi liquid, superconducting, charge density wave, and supersolid phases. The last one is a coexistence phase of superconducting and charge density wave states.     

Effect of different features to drill-wear prediction with back propagation neural network

In this paper, a back propagation neural network (BPNN) has been applied to predict the corner wear of a high speed steel (HSS) drill bit for drilling on different workpiece materials. Specially defined static and dynamic features extracted by a wavelet packet transform (WPT) from the resultant force converted from thrust and torque together with the cutting conditions (workpiece material, spindle speed, drill diameter, feed rate) are used as inputs to train the network to obtain a better output, drill corner wear. Drilling experiments have been carried out over a wide range and, features newly defined and conventional ones, features extracted from different frequency bands are compared.     

Thermal Expansion Behavior of the Si3N4-Whisker-Reinforced Soda-Borosilicate Glass Matrix Composite

Thermal expansion behaviors of a Si₃N₄-whisker-reinforced sodaborosilicate glass matrix composite are studied. An abrupt increase of the coefficient of thermal expansion is observed and is attributed to formation of crystobalite in the sodaborosilicate glass matrix. This thermal expansion behavior is discussed with special reference to the phase transformation of the crystobalite.     

Remineralization effects of xylitol on demineralized enamel

We morphologically determined the effects of xylitol on the remineralization of artificially demineralized enamel. The samples were demineralized and then immersed in a remineralizing solution with or without 20% xylitol at 37 degrees C for 2 weeks. Samples were observed using contact microradiography, a multipurpose image processor (MIP) and a high-resolution electron microscope (HRTEM). Contact microradiography indicated that remineralization occurred in the surface and deep layers of samples immersed in a non-xylitol solution. Samples immersed in a xylitol solution demonstrated less mineralization in the outer 10 microm of the outermost surface layers, but more mineralization in the middle and deep layers, than was observed in the non-xylitol samples. The MIP evaluation indicated that remineralization was more prominent in layers at depths of 50-60 microm in the xylitol samples than in the non-xylitol samples. Observation of the xylitol samples by HRTEM revealed crystals of various sizes and irregular shapes with unclear crystal angles in the outermost surface layers. In the middle layers, they had thickened and angles of crystals are clear. These results indicate that xylitol can induce remineralization of deeper layers of demineralized enamel by facilitating Ca2+ movement and accessibility.     

Optical measurement in carbon nanotubes formation by pulsed laser ablation

Carbon nanotubes (CNTs) were produced by laser ablation of a graphite composite target in argon and nitrogen ambient gas. To investigate the effect of nitrogen gas on CNTs formation, the plasma plume was examined using optical emission spectroscopy. The vibrational temperature of C₂ molecules was estimated by fitting of a Swan band spectrum. The temperature in N₂ ambient gas is lower than that in Ar ambient gas. In a nitrogen atmosphere, the spectrum intensity of C₂ Swan band was enhanced and CN violet system was also observed. Soot collected in the reaction tube was observed using FE-SEM and TEM. The soot deposited in the nitrogen gas contained more bundled CNTs than those in Ar ambience.     

Monitoring biofilm development in a microfluidic device using modified confocal reflection microscopy

The feasibility of a method to monitor biofilm development non-destructively in a microfluidic device was addressed. Here, we report that biofilm growth could be non-destructively monitored by an image analysis technique based on modification of confocal reflection microscopy.     

Interfacial shear strength of C/C composites

Fiber-bundle push-out, single-fiber push-in, and single-fiber push-out tests were conducted in order to examine the applicability of these methods for determining the interfacial shear strength of carbon-carbon composites. The fiber-bundle push-out test resulted mostly in fractures along the fiber/matrix interface but created a small amount of fractures in the matrix. Hence, the evaluated strength was regarded as an approximate value. In order to precisely evaluate the interfacial strength, push-in and push-out tests for a single fiber were performed using a micro-Vickers indentation tester. In these tests, the load has to be placed within a target fiber, and the indentation should not extend to the matrix. This condition restricted the load that could be applied to a carbon fiber. Within this limit, a single carbon fiber could not be pushed-in. For the sake of load reduction, single-fiber push-out tests were conducted using thin specimens. The thickness appropriate for a single-fiber push-out specimen was estimated based on the interfacial shear strength obtained by the bundle push-out tests. Below this thickness, single-fiber push-out tests could be successfully performed.