Simultaneous determination of ozone and carbonyls using trans-1,2-bis(4-pyridyl)ethylene as an ozone scrubber for 2,4-dinitrophenylhydrazine-impregnated silica cartridge

A new method for the simultaneous determination of ozone and carbonyls in air using a two-bed cartridge system has been developed. Each bed consists of reagent-impregnated silica particles. The first contains trans-1,2-bis-(4-pyridyl) ethylene (BPE) while the second contains 2,4-dinitrophenylhydrazine (DNPH). Air samples are drawn through the cartridge first through the BPE and then through the DNPH. Ozone in the air sample is trapped in the first bed by the BPE-coated silica particles and produce pyridine-4-aldehyde. Airborne carbonyls pass unimpeded thorough the BPE and are trapped in the second bed by the DNPH-coated silica particles. They produce carbonyl 2,4-DNPhydrazones. DNPH and carbonyl 2,4-DNPhydrazones are not influenced by ozone because of effective trapping by the BPE. Extraction is performed in the direction reverse to air sampling. When solvent is eluted through the BEP/DNPH cartridge, excess DNPH is washed into the BPE bed where it reacted with pyridine-4-aldehyde and forms the corresponding hydrazone derivative. All of the hydrazones derived from airborne carbonyls and pyridine-4-aldehyde (derived from ozone) are completely separated and measured using high-performance liquid chromatography. An Ascentis RP-Amide column is used, and the mobile phase is 40% aqueous acetonitrile containing 2 mmol/L ammonium acetate. The use of a BPE/DNPH cartridge has made possible the simultaneous determination of ozone and carbonyls. A separate ozone scrubber is not necessary with the BPE/DNPH cartridge because the BPE portion of the sampler serves this function.     

Schottky barrier heights of contact metals to p-type ZnSe

Schottky barrier heights (SBHs) of a variety of metals (In, Cd, Nb, Ti, W, Cu, Ag, Au, Ni, Pt, and Se) contacting to p-ZnSe grown by a molecular beam epitaxy method were determined by analyzing capacitance-voltage (C-V) and/or current density-voltage (J-V) curves. The SBH values of the Au and Ni contacts were determined from intersections of straight lines of the C⁻²-V curves to be 1.23 and 1.13 eV, respectively. The J-V calculations provided a large SBH value of 1.2 ± 0.1 eV for a variety of metals, indicating that the Fermi-level could be pinned at the contact interface. Reduction of the SBH values to a level lower than 0.4 eV and/or increase of doping concentrations to a level higher than 10²⁰ cm⁻³ are essential to obtain an ohmic contact with contact resistivity of around 10⁻³ Ω·cm².     

Remineralization effects of xylitol on demineralized enamel

We morphologically determined the effects of xylitol on the remineralization of artificially demineralized enamel. The samples were demineralized and then immersed in a remineralizing solution with or without 20% xylitol at 37 degrees C for 2 weeks. Samples were observed using contact microradiography, a multipurpose image processor (MIP) and a high-resolution electron microscope (HRTEM). Contact microradiography indicated that remineralization occurred in the surface and deep layers of samples immersed in a non-xylitol solution. Samples immersed in a xylitol solution demonstrated less mineralization in the outer 10 microm of the outermost surface layers, but more mineralization in the middle and deep layers, than was observed in the non-xylitol samples. The MIP evaluation indicated that remineralization was more prominent in layers at depths of 50-60 microm in the xylitol samples than in the non-xylitol samples. Observation of the xylitol samples by HRTEM revealed crystals of various sizes and irregular shapes with unclear crystal angles in the outermost surface layers. In the middle layers, they had thickened and angles of crystals are clear. These results indicate that xylitol can induce remineralization of deeper layers of demineralized enamel by facilitating Ca2+ movement and accessibility.     

Optical measurement in carbon nanotubes formation by pulsed laser ablation

Carbon nanotubes (CNTs) were produced by laser ablation of a graphite composite target in argon and nitrogen ambient gas. To investigate the effect of nitrogen gas on CNTs formation, the plasma plume was examined using optical emission spectroscopy. The vibrational temperature of C₂ molecules was estimated by fitting of a Swan band spectrum. The temperature in N₂ ambient gas is lower than that in Ar ambient gas. In a nitrogen atmosphere, the spectrum intensity of C₂ Swan band was enhanced and CN violet system was also observed. Soot collected in the reaction tube was observed using FE-SEM and TEM. The soot deposited in the nitrogen gas contained more bundled CNTs than those in Ar ambience.     

Intestinal absorption and biological effects of orally administered amorphous silica particles

Although amorphous silica nanoparticles are widely used in the production of food products (e.g., as anticaking agents), there is little information available about their absorption and biological effects after oral exposure. Here, we examined the in vitro intestinal absorption and in vivo biological effects in mice of orally administered amorphous silica particles with diameters of 70, 300, and 1,000 nm (nSP70, mSP300, and mSP1000, respectively) and of nSP70 that had been surface-modified with carboxyl or amine groups (nSP70-C and nSP70-N, respectively). Analysis of intestinal absorption by means of the everted gut sac method combined with an inductively coupled plasma optical emission spectrometer showed that the intestinal absorption of nSP70-C was significantly greater than that of nSP70. The absorption of nSP70-N tended to be greater than that of nSP70; however, the results were not statistically significant. Our results indicate that silica nanoparticles can be absorbed through the intestine and that particle diameter and surface properties are major determinants of the degree of absorption. We also examined the biological effects of the silica particles after 28-day oral exposure in mice. Hematological, histopathological, and biochemical analyses showed no significant differences between control mice and mice treated with the silica particles, suggesting that the silica nanoparticles evaluated in this study are safe for use in food production.     

Automated single nucleotide polymorphism typing using bead array in capillary tube

A low-cost and simple on-site technique for genotyping single nucleotide polymorphisms (SNPs) was developed. The technique is based on allele-specific primer PCR and the recently developed bead arrays in a single tip technique. The performance of the method was verified by genotyping four SNPs that correlate with cardiovascular diseases.     

Hand-eye system with three-dimensional vision and microgripper for handling flexible wire

A three-dimensional hand-eye system has been specially developed for handling, forming, and inserting flexible wires in electronic assemblies. The system consists of a vision system capable of measuring three-dimensional positions and a gripper capable of microforce control. The hand-eye system performs its tasks based on visual and force sensor data.The vision system uses a camera, a multiplanar laser light projector, and a video-rate image processor to measure the three-dimensional position of a flexible wire on a complex background. The projector consists of multiplanar light beams and a single-planar light beam and is robot-mountable. The single-planar light is used to simplify the matching of the multiplanar light beams and projection images. This is one of the most important features of our method. The measurement time is within 1.2 s for 20 positions on the wire, which is less than one robot cycle. The measurement accuracy is better than 0.2 mm in the plane for a 100×100 mm scene and is better than 1 mm perpendicular to the plane for a depth of 500 mm.The microgripper has 3-axis sensors capable of detecting three types of forces: grasping, pulling, and pushing. The dynamic range of the grasping force is 0.005 to 0.6 N, enabling high-resolution control. Two piezoelectric actuators are used in the microgripper fingers and a 3-mm stroke is achieved by amplifying the actuator's displacement using a two-stage lever.This system has been used for wire handling in magnetic disk slider manufacture, which is a difficult and delicate task. Measurement, grasping, and upper-stage insertion had a 100 percent success rate using autorecovery, making the hand-eye system feasible. This paper discusses design concepts, the range measurement principle, the system itself, and wire-handling applications.     

Slug to annular flow transition during boiloff in a rod bundle under high-pressure conditions

High-pressure boiloff experiments in a wide range of bundle powers by using the Two-Phase Flow Test Facility (TPTF) were conducted. Two kinds of boiloff patterns were observed in these experiments. One is the boiloff pattern in a low bundle power, in which the dryout points of rods locate at a certain elevation in the bundle because the mixture level controls the dryout points. The other is the boiloff pattern in a high bundle power, in which the clear mixture level can not be observed and the dryout points of rods locate in a wide range of vertical directions. The vertical scatter of the dryout points is considered to be due to the break of the thin water film on the heater rods under the annular flow pattern.A simple model to predict the slug to annular flow transition in the rod bundle is proposed. In the model, the slug to annular flow transition takes place when the interferences of the water films on the neighboring rods cease. The model appeares to give good predictions of the previous flow transition experiment conducted in a rod bundle. The slug-annular transition below the dryout points was predicted with the present model in the high power boiloff experiments of TPTF. No slug-annular transition below the dryout points is predicted with the present model in the low power boiloff experiments.     

Heavy oxynitridation technology for forming highly reliable flash-type EEPROM tunnel oxide films

For the first time, it is demonstrated that in flash-type EEPROMs, the endurance properties are dramatically improved by heavy oxynitridation (RTONO) of the tunnel oxide. The layer composition evaluated by SIMS measurement indicates that large amounts of N atoms (>10/sup 20/ atom/cm/sup 3/) pile up at the SiO/sub 2/-Si interface, and are distributed in the bulk SiO/sub 2/. In addition, the RTONO film reduces the number of hydrogen atoms, which are the origin of electron traps. This oxynitridation causes a decrease of both electron and hole traps in the tunnel oxide, resulting in an improvement of the threshold voltage narrowing.<>