核素心室造影舒张早期功能测定对冠心病估价

用平衡法核素心室造影自动左心室功能测定法检查了２３例正常人、３７例无心肌梗塞（ＣＡＤ－ＮＭＩ）和１４例有心肌梗塞（ＣＡＤ－ＭＩ）冠心病人左心室功能。结果表明，ＰＦＲ反映心肌缺血改变比其他心功能参数敏感。ＣＡＤ－ＮＭＩ组与正常对照组比较，ＰＦＲ的灵敏度为９４．５９％，Ｐ〈０．００１，其他参数的灵敏度依次为ＴＰＦＲ５４．０５％，Ｐ〈０．０１；ＰＥＲ５４．０５，Ｐ〈０．０１；ＴＰＥＲ４９．９５％，Ｐ〈０     

电工实践教学改革与实践

电工实践教学是培养大学生电类工程能力的重要环节，本文介绍我们以培养人才为中心在电工实习基地建设；实践教学内容，方法和手段等方面进行的改革与实践。     

米塔尔钢铁集团的全球并购发展战略

概述了米塔尔的并购经过和并购特点,着重探讨了米塔尔的管理模式、人员情况、钢铁厂布局、生产经营、主要战略伙伴、研发机构及其生产、采购与销售策略。系统地分析了米塔尔在中国的发展,指出米塔尔在全球钢铁业整合中处于领先地位,米塔尔来中国投资看中的是中国的原料和市场,且运作步伐明显加快,会对中国钢铁企业构成很大的威胁。     

用于微波/射频集成电路的一种新型低损耗介质——多孔硅及氧化多孔硅厚膜

提出在单片微波集成电路(MMIC)中用多孔硅/氧化多孔硅厚膜作微波无源器件的低损耗介质膜.研究了厚度为70μm的多孔硅/氧化多孔硅厚膜在低阻硅衬底上的形成,这层厚膜增加了衬底的电阻率,减少了微波的有效介质损耗.通过测量在低阻硅衬底上形成的氧化多孔硅厚膜上的共平面波导的微波特性,证明了在低阻硅衬底上用厚膜氧化多孔硅可以提高共平面传输线(CPW)的微波特性.     

碱解玉米皮制备阿魏酸的研究

通过碱解玉米皮可释放阿魏酸.采用正交设计探讨了碱解和纯化阿魏酸的工艺,其最佳工艺为用含1%Na0H的50%乙醇溶液于85℃回流反应2h提取玉米皮(质量比110)中的阿魏酸.为防止阿魏酸氧化,在提取液中添加50 mg/100 mL的亚硫酸氢钠.将碱解液减压浓缩,用盐酸调节pH至3.0.每次用2倍体积的乙酸乙酯萃取3次,取酯相,减压挥干乙酸乙酯,用碱液溶解,再用盐酸调pH=2,所得产品为黄色油状物.检测结果表明,采用该工艺获得的阿魏酸纯度达82.69%,收率为148.92 mg/10 g玉米皮.     

盛乐崛起浅析--小城镇发展途径研究

盛乐发展现状 由内蒙古自治区首府呼和浩特市区沿209国道向南,在39公里处,奇迹般地崛起一座新兴工业小城镇——和林县盛乐经济园区。到目前已经完成6平方公里的“七通一平两化”(通路、通水、通电、通热、通事、通邮、通讯和土地平整、亮化、美化)基础设施建设和209国道东侧宽50米长3000米的绿化带工程,园区绿化覆盖率达40％,已协议引进17家企业,总     

Grafting of maleic anhydride onto polyethylene through a green chemistry approach

The grafting of a polymer can lead to the improvement and modification of the polymer and thus expand its applications. Grafting methods include solution grafting in organic solvents, melt grafting at high temperatures, and light grafting with radioactive sources. These methods have their advantages and disadvantages. The disadvantages include waste treatment, consumption of energy, and so on. In this study, a hydrothermal process which is called the green approach, was developed to prepare graft copolymers. The effect of various factors on the grafting degree was investigated in detail. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Upper-bound analysis of the pressure-assisted injection forging of thick-walled tubular components with hollow flanges

An upper-bound analysis of the pressure-assisted injection forging (PAIF) of thick-walled tubular components with hollow flanges was conducted to predict the maximum forming-pressure requirements. The polymeric pressurizing material and the pure aluminium work material employed were assumed to obey the von-Mises’ yield criterion, the two materials being divided into three and six zones, respectively, and described using kinematically admissible velocity fields. An upper-bound solution was derived based on this model. Experiments were conducted to validate the solution. The results suggest that the upper-bound analysis has sufficient accuracy for the prediction of the forming-pressure requirements. Subsequently, a parametric analysis was conducted to study the effects of variation of the principal parameters of the process and the geometry, such as tube thicknesses, flange dimensions and friction, on the forming-force requirements, which showed other useful applications of the upper-bound solutions.     

筛查基因突变的新技术——循环双脱氧指纹图谱法及其应用

建立了适用于大批量标本基因突变筛查的双脱氧指纹图谱法即ｄｄＦ。该技术民测定ＤＮＡ序列的双脱氧末端终止法及ＳＳＣＰ二者长处于一身，即只作一个双脱氧末端终止反应，然后将反应产物在与ＳＳＣＰ相同的电泳条件下进行聚丙烯酰胺凝胶电泳，这样有突变的样品不会漏检，阳性检出率高达１００％。     

高碳铬铁电炉高基质干式打结料的研究

通过对组成打结料成分特性的研究，提出以优质原料生产的MgO-CaO-Fe2O3系合成砂为骨料，用MgO〉97％，粒度〈0．088mm烧结镁砂做细粉，适当添加超微粉等工艺措施，制成适当高碳铬铁电炉炉底用的高基质打结料，通过调控基质成分，实现材料相和固相的复合烧结。