丙烯酸酯与甲基丙烯酸酯的共聚及性能研究

采用悬浮聚合法，以丙烯酸－２－乙基－己酯与甲基丙烯酸十二酯为单体，合成了共聚型高吸油性树脂。研究了共聚单体的配比、交联剂用量、引发剂用量诸因素对高吸油性树脂的性能影响。制得的树脂可以吸其自身质量的１１．８倍的煤油、１４．７倍的苯、６．５倍的泵油。     

钢管机械扩径工艺研究

介绍了大口径直缝焊管机械扩径的优点，原理及扩径力的计算，找出影响扩径力及扩径头寿命的因素。     

����ѡ������Ļ�ɫ���߷���

本文根据灰色系统理论中的灰色决策原理,提出了一种合理选择钻机的新方法,并通过了实例验证。结果表明,这种方法切实可行。     

计算机网络安全体系的研究

首先,结合国内外同行的最新研究成果,我们将对网络系统中的不安全因素加以分析,并形式化地给出一个安全计算机网络系统的定义;然后将从理论上阐述一个基于OSI-RM体系的网络安全保护体系的模型,并讨论该安全保护体系在现有系统中的作用。     

光测遥测数据联合计算速度的方法

提出了利用遥测的过载、俯仰角信息和光测的坐标联合计算弹道关机段速度的方法，从遥测结果的系统误差、随机误差和数值积分的截断误差三万面对剩余误差的影响进行了精度分析，并给出了速度精度的算法。     

Morphology control of titanium oxides by tetramethylammonium cations in hydrothermal conditions

The effect of tetramethylammonium cations (TMA⁺) on TiO₂ crystal morphology in hydrothermal conditions has been studied. The as-synthesized samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM) methods. The morphologies including besom-like particle, nanosheet and nanotube have been observed. The different ways TMA⁺ cations in the hydrothermal bases affect the crystal growth manner are suggested to be responsible for the different morphologies of the as-synthesized samples.     

Effect of polymerization conditions on o‐phenylenediamine and o‐phenetidine oxidative copolymers

A series of new o‐phenylenediamine (OPD)/o‐phenetidine (PHT) copolymers with partly phenazine‐like structures has been successfully synthesized at three polymerization temperatures by chemically oxidative polymerization in four different polymerization media. The molecular structures and properties of the resulting OPD/PHT polymers were investigated by IR, UV–vis and high‐resolution ¹H NMR spectroscopies, and DSC, in order to ascertain the effect of reaction temperature, comonomer ratio and acid medium. The copolymerization mechanism of OPD with PHT monomers has been proposed. It is found that the statistical OPD/PHT copolymer obtained at a temperature of 118 °C has a higher degree of polymerization than that obtained at 12–17 °C. The OPD content in the copolymers calculated from NMR spectroscopic analysis is higher than that in the feed OPD content, whereas the OPD content calculated from element analysis is slightly lower than the feed OPD content. It can be predicted that denitrogenation takes place in the OPD units during the polymerization process at OPD/PHT molar ratios of 90/10 and 100/0. These OPD/PHT copolymers exhibit a much better solubility than the OPD homopolymer, hence suggesting an incorporation of PHT units into the phenazine structure of the homopolymer. The thermal behavior of the copolymers was also studied. Copyright © 2004 Society of Chemical Industry     

DCA-112催化裂化抑焦剂的工业应用

针对改善催化裂化反应微环境研制开发的DCA - 112催化裂化抑焦剂 ,具有抑制生焦、改善产品分布、应用流程简单、加注方便等特点 ,经中石化长炼分公司 1Mt/a重油催化装置工业应用表明 ,在相近的工艺条件下 ,掺渣比提高 4 13个质量百分点 ,总液收提高 1 0 2个质量百分点。     

变频器的选型及配置要点

本文针对应用广泛的通用变频器，提出了在变频器选型和外围配置中需要注意的一些问题。     

超临界流体中的酶催化

与其他非水相酶催化介质相比 ,超临界流体有其独特的优越性。阐述了超临界流体的概念、对超临界流体的选择原则以及在超临界流体中酶催化的各种影响因素 ,还讨论了在此类流体中酶催化的应用和发展前景