晶须取向对SiCw／Al复合材料切削表面质量的影响

切削与晶须取向方向间的夹角对ＳｉＣｗ／Ａｌ复合材料切削表面质量有很大影响。当切削角为４５°时，晶须拔出和转动现象均较少，复合材料切削表面粗糙度最低。当切削角为１３５度时，晶段转动造成的撕裂破坏程度很大，复合材料切削表面粗糙度最大。     

铝－锂合金中δ’（Al＿3Li）沉淀相时效粗化行为及体积分数的测定

对经固溶处理的二种Ａｌ－Ｌｉ合金（１．９４ｗｔ．％Ｌｉ和２．７５ｗｔ．％Ｌｉ）的时效过程进行了研究。结果表明：δ’的生长速率遵从Ｏｓｔｗａｒｄ粗化动力学。１．９４ｗｔ．％Ｌｉ合金δ’产生于时效过程中，而２．７５ｗｔ．％Ｌｉ合金的δ’产生于时效的前期阶段。前者的表现体积分数明显大于根据相图估算的数伍，真实体积分数则与此值接近；后者的体积分数低于根据相图估算的数值，这可能归咎于δ’固相线的位置、统计学误差及Ｌｉ更易在时效过程中贫化。     

Mass customization of medical devices and implants: state of the art and future directions

The medical field is one in which the need for customization can be clear cut, as providing tailored devices and implants for unique physiologies can provide for a better overall treatment than the use of 'off the shelf' devices and implants. Customization in the production of medical products can be roughly divided into consideration of medical devices, and of implantable parts or systems. The present paper outlines the current state of the art in both of these areas, presents details of projects that are ongoing at the University of Leeds and outlines future research directions.     

中小型模具企业的泄密问题及防范措施

列举了民营模具企业常见的几种泄密现象，并提出了防范措施。     

欧盟邻苯二甲酸盐新规明年实施

欧盟最新颁布的关于邻苯二甲酸盐的新指导标准（第2005／84／EC），将于2007年1月16日起开始执行。     

Nutrient removal performance of an anaerobic–anoxic–aerobic process as a function of influent C/P ratio

The laboratory scale anaerobic–anoxic–aerobic (A²O) process fed with synthetic brewage wastewater was designed to investigate the effects of changing feed C/P ratio on the performance of biological nutrient removal (BNR) processes. In the experiment, the influent chemical oxygen demand (COD) concentration was kept at approximately 300 mg L^?1 while the total phosphorus concentration was varied to obtain the desired C/P ratio. Results showed that when the C/P ratio was lower than 32, phosphorus removal efficiency increased as C/P ratio increased linearly, while when the C/P ratio was higher than 32, the P removal efficiency was maintained at 90–98%, and effluent P concentration was lower than 0.5 mg L^?1. However, regardless of the C/P ratio, excellent COD removal (90% or higher) and good total nitrogen removal (75–84%) were maintained throughout the experiments. It was also found that very good linear correlation was obtained between COD uptake per unit P released in the anaerobic zone and C/P ratio. In addition, the P content in the wasted activated sludge increased with the decrease in the C/P ratio. Based on the results, it was recommended that the wastewater C/P ratio and its effects be incorporated into BNR design and operational procedures, appropriate C/P ratios were used to achieve the effluent treatment goals. Copyright © 2005 Society of Chemical Industry     

知识驱动的UG中的产品开发

重点论述了UG中的KBE即KF模块的知识驱动产品开发设计过程及其关键技术，介绍了知识驱动自动化过程，实例剖析了UG中的KF在产品开发设计过程中的应用。     

非标准工况下空分设备增产氩的研究与实践

文章对非标准工况下的空分设备增产氩措施进行了研究。以宝钢6#60000m3/h空分设备为例,通过设计型算法和校核型算法,建立了空分设备精馏的数学模型,通过改变数学模型的参数,分析了在非标准工况下精馏塔内的组分浓度分布,并提出了优化后的操作方案和操作参数,实施后提高了空分设备的氩提取率,取得了显著的经济效益。     

你快乐么

远的有海明威，近的有三毛、陈宝莲、张国荣，刚刚又有了李恩珠，不一样的生活背景，一样的方式结束人生。只因为他们被相同的问题所纠缠、困扰——抑郁症，让巨星陨落，美人香消。[编者按]     

中国网上银行成长迅速、潜力巨大

2006年12月15日,“中国网上银行年会暨2006中国网上银行调查结果公布和颁奖”活动在北京民族饭店举行。会议上,中国金融认证中心(简称CFCA)联合金融时报社共同发布了《2006中国网上银行调查报告》结果,介绍了中国网上银行评测体系,并为在测评体系中表现优异的银行颁发了相关奖项。国务院信息化办公室相关领导、中国人民银行支付结算司谢众副司长、中国银监会业务创新监管协作部李伏安主任、金融时报社社长汪洋以及二十多家中资、外资商业银行电子银行部负责人及相关代表出席了当天的活动。目前,我国互联网的用户已经超过了1.2亿之多,但是…