Study of individual grown-in and indentation-induced dislocations in GaN by defect-selective etching and transmission electron microscopy

Vickers diamond indentation at 370°C has been employed to introduce dislocations into the plate-like (000-1) N-polar GaN single crystals. It has been established that using standard Vickers diamond indenter, well-defined ‘rosettes’ of defects are formed under 1.5–2 N load applied for 10 min. The resolved patterns of dislocation-related etch pits are formed using molten KOH–NaOH eutectic (E) at 200°C for 1.5–2 min. Individual grown-in dislocations are revealed by this E etch in the GaN matrix. Transmission Electron Microscopy confirmed the correlation of etch pits to individual dislocations emerging at the surface. Nano-crystalline material was found in the highly deformed central region of the indentation rosette. The structure of these nano-crystals was analyzed using electron diffraction. Speculative explanation on a phase transition induced by high local pressure is briefly discussed.     

The TASSO vertex detector

The design, construction and performance of a small pressurized drift chamber of low mass and high wire density is described. The chamber forms part of the TASSO experiment at the PETRA e⁺e⁻ storage ring of the DESY Laboratory. First physics results obtained with the chamber are also briefly discussed.     

Wetting Behavior and Reactivity of Molten Silicon with h-BN Substrate at Ultrahigh Temperatures up to 1750 °C

For a successful implementation of newly proposed silicon-based latent heat thermal energy storage systems, proper ceramic materials that could withstand a contact heating with molten silicon at temperatures much higher than its melting point need to be developed. In this regard, a non-wetting behavior and low reactivity are the main criteria determining the applicability of ceramic as a potential crucible material for long-term ultrahigh temperature contact with molten silicon. In this work, the wetting of hexagonal boron nitride (h-BN) by molten silicon was examined for the first time at temperatures up to 1750 °C. For this purpose, the sessile drop technique combined with contact heating procedure under static argon was used. The reactivity in Si/h-BN system under proposed conditions was evaluated by SEM/EDS examinations of the solidified couple. It was demonstrated that increase in temperature improves wetting, and consequently, non-wetting-to-wetting transition takes place at around 1650 °C. The contact angle of 90° ± 5° is maintained at temperatures up to 1750 °C. The results of structural characterization supported by a thermodynamic modeling indicate that the wetting behavior of the Si/h-BN couple during heating to and cooling from ultrahigh temperature of 1750 °C is mainly controlled by the substrate dissolution/reprecipitation mechanism.     

Shewanella sp. O23S as a Driving Agent of a System Utilizing Dissimilatory Arsenate-Reducing Bacteria Responsible for Self-Cleaning of Water Contaminated with Arsenic

The purpose of this study was a detailed characterization of Shewanella sp. O23S, a strain involved in arsenic transformation in ancient gold mine waters contaminated with arsenic and other heavy metals. Physiological analysis of Shewanella sp. O23S showed that it is a facultative anaerobe, capable of growth using arsenate, thiosulfate, nitrate, iron or manganite as a terminal electron acceptor, and lactate or citrate as an electron donor. The strain can grow under anaerobic conditions and utilize arsenate in the respiratory process in a broad range of temperatures (10–37 °C), pH (4–8), salinity (0%–2%), and the presence of heavy metals (Cd, Co, Cr, Cu, Mn, Mo, Se, V and Zn). Under reductive conditions this strain can simultaneously use arsenate and thiosulfate as electron acceptors and produce yellow arsenic (III) sulfide (As₂S₃) precipitate. Simulation of As-removal from water containing arsenate (2.5 mM) and thiosulfate (5 mM) showed 82.5% efficiency after 21 days of incubation at room temperature. Based on the obtained results, we have proposed a model of a microbially mediated system for self-cleaning of mine waters contaminated with arsenic, in which Shewanella sp. O23S is the main driving agent.     

Electrospun ultrathin nylon fibers for protective applications

Electrospun nylon 6 fiber mats were deposited on woven 50/50 nylon/cotton fabric with the motive of making them into protective material against submicron‐level aerosol chemical and biological threats. Polymer solution concentration, electrospinning voltage, and deposition areal densities were varied to establish the relationships of processing‐structure‐filtration efficiency of electrospun fiber mats. A high barrier efficiency of greater than 99.5% was achieved on electrospun fiber mats without sacrificing air permeability and pressure drop. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Thermal and flow effects during adsorption in conventional,diluted and annular packed beds

Previous investigations have shown a complex combination of thermal and flow effects during adsorption in highly loaded, narrow packed beds. Respective conditions were realized by packing relatively large zeolite particles in a narrow tube (which causes wall channelling) and adsorbing water vapour from air on the particles (which is highly exothermic). The present work extends the investigation to novel column configurations with purposely altered conditions of heat generation and flow—namely to diluted beds, annular beds and beds consisting of coated particles. Experimental results obtained by near infrared tomography are compared with the results of breakthrough experiments in conventional columns and with numerical calculations. The latter are conducted with a non-isothermal, two-dimensional model that not only considers the increase of porosity and flow velocity near the tube wall, but also expresses the effective transport coefficients as functions of the radial coordinate. The model provides reasonable accuracy under conditions for which the usual plug-flow assumption is questionable.     

Experiencing Nature: Embodying Animals in Immersive Virtual Environments Increases Inclusion of Nature in Self and Involvement With Nature

Immersive virtual environments (IVEs) produce simulations that mimic unmediated sensory experiences. 3 experiments (N = 228) tested how different modalities increase environmental involvement by allowing users to inhabit the body of animals in IVEs or watch the experience on video. Embodying sensory‐rich experiences of animals in IVEs led to greater feeling of embodiment, perception of being present in the virtual world, and interconnection between the self and nature compared to video. Heightened interconnection with nature elicited greater perceptions of imminence of the environmental risk and involvement with nature, which persisted for 1 week. Although the effect sizes were small to moderate, findings suggest that embodied experiences in IVEs may be an effective tool to promote involvement with environmental issues.     

Beyond Heparinization: Design of Highly Potent Thrombin Inhibitors Suitable for Surface Coupling

During extracorporeal circulation, when blood comes in contact with artificial surfaces, patients receive a standard treatment with anticoagulants to avoid blood coagulation. Dialysis patients in particular are systemically treated with heparin up to four times a week, causing a high burden for the body. For potential anticoagulant modification of external materials, such as dialysis equipment, a series of highly potent thrombin inhibitors was developed. All inhibitors share the general formula arylsulfonyl‐P3‐Pro‐4‐amidinobenzylamide, where P3 is glycyl or a trifunctional amino acid residue in L ‐configuration. Among this series, several derivatives inhibit thrombin with K_i values of less than 1 nM . Specificity measurements revealed that this inhibitor type is highly specific for thrombin with negligible activity against related trypsin‐like serine proteases. X‐ray analysis of the most potent analogue in complex with thrombin demonstrated that the N‐terminal arylsulfonyl group occupies the aryl binding site, whereas the P3 side chain is directed into the solvent and therefore is well suited for further coupling. Based on their in vitro profile, these inhibitors are suitable candidates for the development of hemocompatible materials with anticoagulant properties.