GHJMn高抗磨合金衬板在大型水泥磨机上的应用

自1882年英国工程师R·A·哈特菲尔德发明标准奥氏体高锰钢(ZGMn13)以来,由于这种韧性较好的耐磨材料,自身具备加工硬化(冷作硬化)的机械性能,诱发A→M相变,可获得高强度、高硬度(HB500以上),从而提高材料耐磨性和使用寿命的特性.所以,一直能够沿用至今天.     

大型喷灌机技术改造与运行管理改革初探

上世纪70～80年代,友谊农场陆续购进了圆型、滚移大型喷灌机近百台,经近30a的运行,大部份喷灌机已经损坏、报废.然而由于近年的连续干旱,对这些灌机进行了更新改造,使23台大型灌机重新发挥了作用.     

一种提高低温流体比体积计算精度的方法

采用了一个既能提高立方型状态方程比体积计算精度，又不影响气液平衡条件的简单摩尔修正项来改进PR方程比体积的计算。本文对19种低温流体给出其修正项的值，计算饱和蒸气和液体比体积，并与未修正的PR方程的计算值比较，结果表明这种修正能显著提高低温流体（包括量子流体氢、氦和强极性的氨气）饱和液体比体积的计算精度，并对蒸气比体积的计算也略有改进。     

助催化剂对TiCl_4/MgCl_2催化丙烯高温聚合的影响

研究了助催化剂种类(三甲基铝、三异丁基铝、三正己基铝、三乙基铝和甲基铝氧烷)及其含量对无内、外给电子体的TiCl4/MgCl2催化剂催化丙烯高温(100℃)聚合性能的影响,并用结晶分级分析、示差扫描量热和凝胶渗透色谱等方法分析了所得聚丙烯的结晶熔融行为和微观结构。实验结果表明,聚合温度从70℃升至100℃时,TiCl4/MgCl2催化剂的定向能力基本不变;100℃聚合时,以烷基化能力较弱的三异丁基铝为助催化剂时TiCl4/MgCl2催化剂的活性最高,而采用烷基化能力最强的三甲基铝为助催化剂时TiCl4/MgCl2催化剂的活性最低;100℃聚合时,助催化剂的种类对TiCl4/MgCl2催化剂的定向能力影响很小。     

高速线材生产的弹簧钢盘卷的表面脱碳分析

从金相角度对高线生产的弹簧钢盘卷的表面脱碳进行了分析，找出相关的影响因素，并针对实际情况提出了相应的改进方法。     

Composition Range of Amorphous Mg-Ni-Y Alloys

Based on the thermodynamic point of view, a method for predication of the composition range of amorphous ter-nary alloys was proposed. The composition range of amorphous ternary alloys is determined by the comparison of the excess free energy of the amorphous alloy and the free energy of competing crystalline states. The free energy is extrapolated from the data of three binary alloys by using Toop‘s model. The method was applied to predict the composition range of amor-phous Mg-Ni-Y alloys. The theoretical results are in good agreement with the available experimental results. It indicates that the present method can be used to predict the composition range for amorphous ternary alloys.     

发生在北美的合成内燃机油定义之争

加氢异构化油是不是合成油?简述了20世纪90年代末重新激活的合成油定义之争、NAD的裁决以及该裁决对各润滑油公司和合成基础油市场的影响.     

Deposition and Properties of Superconducting MgB2 Thin Films

The recently discovered superconductor MgB₂ with T _c at 39 K has great potential in superconducting electronics. In this paper, we review the deposition techniques used for MgB₂ thin films in the light of a thermodynamic study of the Mg-B system with the calculation of phase diagrams (CALPHAD) modeling technique. This thermodynamic study identifies a growth window in the pressure–temperature phase diagram, in which the magnesium pressure is very high for likely in situ growth temperatures. A Hybrid Physical–Chemical Vapor Deposition (HPCVD) technique that successfully achieves such a high Mg pressure is shown to produce in situ epitaxial MgB₂ thin films with bulk superconducting properties.     

X-Ray Measurement of Residual Stress in Plastic Bonded Explosives

The X-ray diffractive technology was adopted for tentative study of plastic bonded explosive. The datum of some new diffractive peaks in standard PDF cards were added. The effects of strain to interplanar distance and crystal size of the explosive were studied. The results show that grain size of plastic bonded explosive is decreasing with the increasing of the pressure, and the residual stress of the explosive is draw stress.     

税库行横向联网系统接口处理平台的设计与实现

文章介绍了湖南省国税局横向联网系统接口处理平台的设计方案，对应用接口的体系结构、业务流程、接口数据结构和数据传输等进行了讨论，建立了基于javasocket和java多线程等主要技术的系统基本框架，重点阐述了系统的业务流程实现方式。该方案实现了异构系统间的数据交换，很好地解决了税务、国库和银行之间“信息孤岛”的问题，确保了横向联网系统安全稳定运行。