Solubility of poly(n-alkylmethacrylate)s in hydrocarbons and in alcohols

Poly(methylmethacrylate) (PMMA), poly(butylmethacrylate) (PBMA), and poly(decylmethacrylate) (PDMA) are completely miscible with toluene at normal pressure from room temperature up to the boiling point of the solvent. In alkanes (C₆ to C₁₀) and 1-pentanol the solubility increases with the length of the side chain of the polymer: PMMA always exhibits a solubility gap within the above temperature range, PBMA shows upper critical solution temperatures (except n-hexane, which is a non-solvent), and PDMA mixes completely with all alkanes under consideration. Alcohols (up to C₄) are non-solvents for PMMA but theta solvents for PBMA and PDMA (except ethanol which is a non-solvent for the latter). The low temperature demixing of ethanol/PBMA is shifted towards lower temperatures by pressure.     

Melt spun matrix fibers of toughened polypropylene copolymers modified by high energy electrons

Binary blends of polypropylene (PP) and ethylene‐octene copolymer (EOC) are prepared by continuous electron‐induced reactive processing at various mass ratios of the blend components and various doses without adding of any grafting agents. The influence of mass ratio and dose is investigated in order to get the optimum processing behavior of toughened PP as well as optimum properties of resulting fibers. It is found that toughened PP with a PP/EOC blend ratio of 97.5–2.5  mass % can be used advantageously as a matrix component for the process of online spinning of glass fiber/toughened PP hybrid yarns. Such hybrid yarns belong to one of the most advanced production methods for the manufacturing of fiber reinforced thermoplastic composites with an increased mechanical performance. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44011.     

RAFT-derived polymer-drug conjugates: poly(hydroxypropyl methacrylamide) (HPMA)-7-ethyl-10-hydroxycamptothecin (SN-38) conjugates

A series of well‐defined polymer–drug conjugates were prepared in order to modify the physical properties of a known cytotoxic drug, 7‐ethyl‐10‐hydroxycamptothecin (SN‐38), the active metabolite of irinotecan (CPT‐11). Reversible addition–fragmentation chain transfer (RAFT) polymerisation was used to covalently and site‐specifically append a defined N‐(2‐hydroxypropyl)methacrylamide (HPMA) polymer to SN‐38 using a graft‐from process. These poly‐HPMA–SN‐38 conjugates displayed excellent aqueous solubility and stability, whilst retaining the cytotoxic activity of the parent SN‐38. In vitro co‐culture assays containing both cancer and noncancer cell lines demonstrated the specificity of RAFT‐derived poly‐HPMA–SN‐38 conjugates for cancerous cells. The concept of post‐optimisation modification of small‐molecule drugs through a graft‐from polymer conjugation method is introduced.     

Liquid flow texture analysis in trickle bed reactors using high-resolution gamma ray tomography

Trickle bed reactor performance and safety may suffer from radial and axial liquid maldistribution and thus from non-uniform utilization of the catalyst packing. Therefore, experimental analysis and fluid dynamic simulation of liquid–gas flow in trickle bed reactors is an important topic in chemical engineering. In the present study for the first time a truly high-resolution gamma ray tomography technique was applied to the quantitative analysis of the liquid flow texture in a laboratory cold flow trickle bed reactor of 90 mm diameter. The objective of this study was to present the comparative analysis of the liquid flow dynamics for two different initial liquid distributions and two different types of reactor configurations. Thus, the hydrodynamic behavior of a glass bead packing was compared to a porous Al₂O₃ catalyst particle packing using inlet flow from a commercial spray nozzle (uniform initial liquid distribution) and inlet flow from a central point source (strongly non-uniform initial liquid distribution), respectively. The column was operated in downflow mode at a gas flow rate of 180 L h⁻¹ and at liquid flow rates of 15 and 25 L h⁻¹.     

Synthesis of structured triglycerides from peanut oil with immobilized lipase

Structured triglycerides (ST) that contain medium- and long-chain fatty acids were synthesized by lipase-catalyzed interesterification between tricaprylin and peanut oil. To select appropriate enzymes, we investigated nine commercial lipase preparations for their ability to hydrolyze pure triglycerides as well as natural oils. Three microbial lipases from Rhizomucor miehei (RML), Candida sp. (CSL), and Chromobacterium viscosum (CVL) gave good results, and immobilized preparations were used in the interesterification. RML gave the highest yields of ST (73%, 40°C), although its hydrolytic activity toward triolein was low. As the temperature was raised to 50°C, the yield of ST increased to 79%. After 120 h reaction time, remaining activities were high for CSL (71%), moderate for CVL (48%), and low for RML (20%). Parts of this paper were presented as a poster at the Biochemical Engineering Conference IX, May 1995, Davos, Switzerland.     

Reproducible Measurement Results in Organic Solvent Nanofiltration with Ceramic Membranes

Ceramic membranes are still quite innovative to organic solvent nanofiltration. Nevertheless, flux and rejection results obtained in filtration measurements seem to depend largely on the experimental procedure, membrane production batch and setup. Therefore, an experimental approach is described, which proved to provide reproducible and reliable results that may be used as data set to derive parameters in model development.     

Increasing the Level of Automation in the Forestry Logging Process with Crane Trajectory Planning and Control

Working with forestry machines requires a great deal of training to be sufficiently skilled to operate forestry cranes. In view of this, it would be desirable within the forestry industry to introduce automated motions, such as those seen in robotic arms, to shorten the training time and make the work of the operator easier. Motivated by this fact, we have developed two experimental platforms for testing control systems and motion‐planning algorithms in real time. They correspond to a laboratory setup and a commercial version of a hydraulic manipulator used in forwarder machines. The aim of this article is to present the results of this development by providing an overview of our trajectory‐planning algorithm and motion‐control method, with a subsequent view of the experimental results. For motion control, we design feedback controllers that are able to track reference trajectories based on sensor measurements. Likewise, we provide arguments to design controllers in an open‐loop for machines that lack sensing devices. Relying on the tracking efficiency of these controllers, we design time‐efficient reference trajectories of motions that correspond to logging tasks. To demonstrate performance, we provide an overview of extensive testing done on these machines.     

Low-Oxidation State Indium-Catalyzed C-C Bond Formation

The development of innovative metal catalysis for selective bond formation is an important task in organic chemistry. The group 13 metal indium is appealing for catalysis because indium-based reagents are minimally toxic, selective, and tolerant toward various functional groups. Among elements in this group, the most stable oxidation state is typically +3, but in molecules with larger group 13 atoms, the chemistry of the +1 oxidation state is also important. The use of indium(III) compounds in organic synthesis has been well-established as Lewis acid catalysts including asymmetric versions thereof. In contrast, only sporadic examples of the use of indium(I) as a stoichiometric reagent have been reported: to the best of our knowledge, our investigations represent the first synthetic method that uses a catalytic amount of indium(I). Depending on the nature of the ligand or the counteranion to which it is coordinated, indium(I) can act as both a Lewis acid and a Lewis base because it has both vacant p orbitals and a lone pair of electrons. This potential ambiphilicity may offer unique reactivity and unusual selectivity in synthesis and may have significant implications for catalysis, particularly for dual catalytic processes. We envisioned that indium(I) could be employed as a metallic Lewis base catalyst to activate Lewis acidic boron-based pronucleophiles for selective bond formation with suitable electrophiles. Alternatively, indium(I) could serve as an ambiphilic catalyst that activates both reagents at a single center. In this Account, we describe the development of low-oxidation state indium catalysts for carbon-carbon bond formation between boron-based pronucleophiles and various electrophiles. We discovered that indium(I) iodide was an excellent catalyst for α-selective allylations of C(sp(2)) electrophiles such as ketones and hydrazones. Using a combination of this low-oxidation state indium compound and a chiral semicorrin ligand, we developed catalytic highly enantioselective allylation, crotylation, and α-chloroallylation reactions of hydrazones. These transformations proceeded with rare constitutional selectivities and remarkable diastereoselectivities. Furthermore, indium(I) triflate served as the most effective catalyst for allylations and propargylations of C(sp(3)) electrophiles such as O,O-acetals, N,O-aminals, and ethers, and we applied this methodology to carbohydrate chemistry. In addition, a catalyst system composed of indium(I) chloride and a chiral silver BINOL-phosphate facilitated the highly enantioselective allylation and allenylation of N,O-aminals. Overall, these discoveries demonstrate the versatility, efficiency, and sensitivity of low-oxidation state indium catalysts in organic synthesis.