Surface-initiated atom transfer radical polymerization of methyl methacrylate on magnetite nanoparticles

The synthesis of magnetite nanoparticles coated with a well-defined graft polymer is reported. The magnetite nanoparticles with an initiator group for copper-mediated atom transfer radical polymerization (ATRP), 2-(4-chlorosulfonylphenyl) ethyltrichlorosilane (CTCS) chemically bound on their surfaces were prepared by the self-assembled monolayer-deposition method. The surface-initiated ATRP of methyl methacrylate (MMA) was carried out with the CTCS-coated magnetite nanoparticles in the presence of free (sacrificing) initiator, p-toluenesulfonyl chloride. Polymerization proceeded in a living fashion, exhibiting first-order kinetics of monomer consumption and a proportional relationship between molecular weight of the graft polymer and monomer conversion, thus providing well-defined, low-polydispersity graft polymers with an approximate graft density of 0.7 chains/nm². The molecular weight and polydispersity of the graft polymer were nearly equal to those of the free polymer produced in the solution, meaning that the free polymer is a good measure of the characteristics of the graft polymer. The graft polymer possessed exceptionally high stability and remarkably improved dispersibility of the magnetite nanoparticles in organic solvent.     

Relationships between hydrogen donor abilities and chemical structure of aromatic compounds in terms of coal liquefaction

To obtain fundamental information about hydrogen transfer, the relationships between hydrogen donor ability and chemical structure of model compounds representing donor solvents is studied using gas chromatography,¹H n.m.r. and computing calculation methods. The order of the model compounds in terms of the ability as donor solvent to release hydrogen is: decalin < tetralin < 1,2-dihydronaphthalene < < 1,4-dihydronaphthalene. This trend closely correlates with the difference in binding energies of the hydroaromatic compounds and their radicals, determined by intermediate neglect of differential overlap (INDO) calculation. Electron spin resonance spectroscopy (e.s.r.) confirms that radical species are created after heat-treatment of the donor compounds. The ability of model compounds representing coal to accept hydrogen is assessed from a comparison of the¹H n.m.r. spectra. It is established that donor and acceptor efficacies are dependent upon chemical structure.     

Elastoplastic Finite Element Analysis and Strength Evaluation of Adhesive Butt Joints of Similar and Dissimilar Hollow Shafts Subjected to External Bending Moments

Stress distributions and deformation of adhesive butt joints are analyzed by an elastoplastic finite element method when the joints of similar and dissimilar shafts are subjected to external bending moments. The effects of the ratio of Young's modulus for the adherends to that for an adhesive and the effects of the adhesive thickness on the interface stress distribution are investigated. Joint strength is predicted by using the elastoplastic interface stress distributions. It is found that the singular stress at the edge of the interfaces increases with an increase of the ratio of Young's modulus. Measurement of strains in joints and experiments on joint strength were conducted. The numerical results are in fairly good agreement with the experimental results. It is observed that the joint strength for dissimilar shafts are smaller than those for similar shafts. A fracture of dissimilar adhesive up-bonded shafts occurred from the interface of the adherend with smaller Young's modulus. It is seen that joint strength increases as the adhesive thickness increases.     

Prediction model of surface residual stress within a machined surface by combining two orthogonal plane models

The variation of surface residual stress within a machined surface layer caused by face turning was studied. The size of the tool’s corner radius and the feed rate affect residual stress. A process model using the finite element method is proposed and the mechanical effects of the corner radius and feed rate on a machined surface were discussed. When a tool with a small corner radius is used, surface residual stress perpendicular to the cutting direction becomes compression stress. As well, surface residual stress changes from tension to compression as the feed rate decreases. The process model consists of an orthogonal cutting simulation and an indentation-like simulation of a corner radius into a work piece surface. The simulated results show quantitative agreement with the residual stress measured experimentally. The integrity of the machined surface will be controlled more efficiently if the cutting conditions during finishing are determined with the proper consideration of the surface generating process.     

Forming of aluminium alloy at temperatures just below melting point

In order to improve the mechanical properties of products, a forming process of a solid material at a temperature just below the melting point is proposed. The material is deformed at the semi-solid temperature due to the heat generation caused by plastic deformation. The tensile strength, elongation, hardness and toughness of the aluminium alloy (Al–7%Si–0.3%Mg) billet extruded at temperatures between 500 and 550 °C are compared with those of the billet extruded in the hot forming (450 °C) and the semi-solid (560 °C) temperatures. The billet temperature during forming is evaluated by the finite element simulation. The tensile strength and hardness of the billet extruded at 550 °C just below the solidus temperature are higher than those for a billet at 450 °C, and they are almost the same as those for a billet deformed at 560 °C in the semi-solid region. The elongation and toughness of the extruded billet at 550 °C are lower than those for a billet at 450 °C. The forming load at 550 °C is almost half of that at 450 °C. Cracking on the surface of the extruded billet occurs at a high punch speed. The calculated temperature when the solid billet is extruded in the semi-solid state agrees well with the experimental one at which the tensile and hardness are improved.     

Novel process for cover glass with ideal stress distribution

Abstract — This paper proposes a new process to manufacture cover glass that overcomes a strength trade‐off between the face and the edge. In the process, alkali barrier films are deposited on glass faces before an ion exchange process in order to control face stress properties without inhibiting the edge strengthening. As a demonstration of the process, alkali‐alumino‐silicate glass sheets with sputter‐deposited SiO₂ films were chemically strengthened, and then their stress properties and strengths were investigated. As a result, thicker SiO₂ films cause lower face DOL (depth of strengthened layer), and it is observed that the faces have lower DOL than the edges. In strength tests corresponding to major fracture modes of smartphone cover glass, specimens with 80–100 nm films have more balanced face performance and better edge impact strengths than the no‐film specimen.     

Optimization of facial skin temperature-based anomaly detection model considering diurnal variation

Artificial Life and Robotics - The amount of blood under the surface of skin is controlled by the autonomic nervous system and directly influences the facial skin temperature. Classification models...     

A new approach to the design of high-Tc superconductors: Metallised interlayers

We show from muon spin relaxation (SR) studies on mercury HTS superconductors that a 50-fold increase in irreversibility field obtained by partial substitution of Re for Hg is due to metallisation of the Hg/Re layer. Induced superconductivity on this metallic layer doubles the overall superfluid density. This suggests a new approach to the design of high performance HTS materials: metallising one of the non-CuO₂ interlayers and thereby greatly enhancing the superconducting properties.     

Thermodynamics of calcium and oxygen in molten titanium and titanium-aluminum alloy

The deoxidation equilibrium of molten titanium and titanium-aluminum alloys saturated with solid CaO has been measured in the temperature range from 1823 to 2023 K. The equilibrium constant of reaction CaO (s)=Ca (mass pct in Ti,Ti-Al)+O (mass pct in Ti,Ti-Al) and the interaction parameter between calcium and oxygen were determined for Ti, TiAl, and TiAl₃. The standard Gibbs energy of reaction for TiAl was obtained as follows: $$\Delta G^\circ = 279,000 - 103TJ/mol$$ The possibilities for the deoxidation of titanium and titanium-aluminum alloys by using calcium-based fluxes are discussed.