Experimental study of the flow in helical circular pipes: Torsion effect on the flow velocity and turbulence

An objective of the present paper is to experimentally clarify the torsion effect on the flow in helical circular pipes. We have made six helical circular pipes having different pitches and common non-dimensional curvature δ of about 0.1. The torsion parameter β0, which is defined by β0 = τ/（2δ）1/2 with non-dimensional torsion r, are taken to be 0.02, 0.45, 0.69, 1.01, 1.38 and 1.89 covering from small to very large pitch. The velocity distributions and the turbulence of the flow are measured using an X-type hot-wire anemometer in the range of the Reynolds number from 200 to 20000. The results obtained are summarized as follows： The mean secondary flow pattern in a cross section of the pipe changes from an ordinary twin-vortex type as is seen in a curved pipe without torsion （toroidal pipe） to a single vortex type after one of the twin-vortex gradually disappears as β0 increases. The circulation direction of the single vortex is the same as the direction of torsion of the pipe. The mean velocity distribution of the axial flow is similar to that of the toroidal pipe at small β0, but changes its shape as β0 increases, and attains the shape similar to that in a straight circular pipe when ,β0 = 1.89. It is also found that the critical Reynolds number, at which the flow shows a marginal behavior to turbulence, decreases as ,β0 increases for small ,β0, and then increases after taking a minimum at ,β0 ≈ 1.4 as ,β0 increases. The minimum of the critical Reynolds number experimentally obtained is about 400 at ,β0 ≈ 1.4.     

Application of a chromium‐free photoresist to CRT screen processing

In 1998, Toyo Gosei Co. published a paper on the development of a new water‐soluble photopolymer of high sensitivity, PVA‐ARBB. In close co‐operation with LG. Philips Displays, the new material was further developed to be applicable in patterning the phosphor layer of a CRT screen. The new material shows about 3 times higher light sensitivity, gives 4–5% higher luminance, has no dark reaction, and is chromium‐free. It is the first chromium‐free photoresist used for phosphor patterning in CRT mass production. A comparison is presented between the conventional resist and the new resist. A survey is given of the most important process conditions.     

Future of international cooperative activity for graduate school education in nuclear field

Further improvement of graduate school education in nuclear field is one of the important issues in universities in nuclear field. The COE-INES program has performed international cooperative activities for graduate school education with foreign universities in nuclear field. There are a lot of possibilities in international cooperation with foreign universities for graduate school education. The use of Internet can be a strong tool for the activities.     

Geometric control and tuneable pore size distribution of buckypaper and buckydiscs

The fabrication of buckypaper from unfunctionalised multi-walled carbon nanotubes (MWCNTs) without the aid of surfactants or surface modification techniques is accomplished through a novel and quick frit compression method. The dimensions can be controlled through the size of the syringe housing and the through the mass of carbon nanotubes added. Their thicknesses are typically much larger than surfactant-cast buckypaper and range from 120 μm up to 650 μm; buckypaper with thicknesses larger than 500 μm we call buckydiscs. Buckypaper and buckydiscs are mechanically robust to handle, flexible, stable in solvents and possess larger porosities than Triton-X100 cast buckypaper. They also exhibit a memory effect when bending wetted samples, returning to their former geometry on drying. Buckypaper and buckydiscs were studied by mercury intrusion porosimetry to reveal a defined distribution of mesopores and small macropores that is, along with their density and apparent free volume, dependant on the casting solvent and therefore tuneable. Moreover, the frit compression system also allows control over the 3-dimensional geometry of the buckydiscs during the casting process.     

Cognitive deficits in docosahexaenoic acid-deficient rats.

This study investigated the influence of brain docosahexaenoic acid (DHA) deficiency on simple and complex olfactory-based learning and memory in 2nd generation (F2) adult male rats. Rats raised and maintained on either an n-3-adequate or an n-3-deficient diet were tested for acquisition of an olfactory learning set and an olfactory memory task, and for motivation to obtain a water reward. Despite a 76% decrease in brain DHA, n-3-deficient rats were able to acquire most simple 2-odor discrimination tasks but were deficient in the acquisition of a 20-problem olfactory learning set. This deficit could not be attributed to changes in sensory capacity but, instead, appeared to represent a deficit in higher order learning. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Transport of direct dye into cellulose membrane

The dyeing process for a cellulose membrane–direct dye system is analyzed based on a parallel transport mechanism of surface and pore diffusion with Freundlich isotherm. Numerical solutions were obtained in order to clarify how the surface and pore diffusion resistances affect the uptake curve. The numerical solutions were also compared with an analytical solution for surface diffusion control to establish the range where the analytical solution can be considered as an acceptable approximation. The uptake curves in the cellulose membrane-chromophore (C.I. Direct Yellow 12) system in the presence of inorganic electrolyte were measured. The rate of adsorption and the maximum amount of adsorption increased with an increase in the concentration of those electrolytes. The rate of adsorption was approximately controlled by the surface diffusion rather than by pore diffusion. The surface diffusivities of the dye were little affected by either the concentration and or nature of the electrolyte.     

A statistical evaluation of the free energy of Fe-base ternary ordering alloys

The free energy of the Fe-base ternary ordering alloys whereB2 andD0₃ ordered structures are formed is evaluated. The statistical theory is employed using a pairwise interaction approximation taking into account not only the atomic interaction but also the magnetic interaction, based upon the Bragg-Williams-Gorsky model. The application of this model on Fe-Si-Co ordering alloys are demonstrated. The propriety of the calculation results are performed by comparing the experimental results. The influences of the magnetic energy to the stability of ordered structures are also demonstrated.     

Lightning occurrence data observed with lightning location systems of electric power companies in Japan: 2009–2013

Nine electric power companies in Japan have been collecting lightning data with lightning location systems. Five years of the lightning data (2009–2013) are summarized and analyzed in this paper. The recent annual number of lightning flashes of which the current is more than 10 kA in Japan is around 1 million. The variations of lightning occurrence characteristics by areas, seasons, and so on, are clarified. Meteorological conditions that may affect lightning occurrence are also discussed. Furthermore, we show that there is a clear correlation between the number of lightning strikes and the outage rate of transmission lines. © 2016 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Redox‐Active Catalyst Based on Poly(Anilinesulfonic Acid)‐ Supported Gold Nanoparticles for Aerobic Alcohol Oxidation in Water

The hybrid consisting of gold nanoparticles and poly(2‐methoxyaniline‐5‐sulfonic acid), which works as a redox mediator for transferring protons and electrons, catalyzed the oxidation reaction of various alcohols in water under molecular oxygen.