Helium gas permeability of montmorillonite/epoxy nanocomposites

Helium gas permeability of silicate clay (montmorillonite) particles/epoxy nanocomposites was examined. The incorporation of increasing amounts of montmorillonite particles reduced the helium gas permeability. Based on Fick’s law, gas permeation behavior of the nanocomposite was evaluated. With the increase of montmorillonite loading, gas diffusivity decreased, while gas solubility increased. Helium diffusion behavior is in agreement to the numerical results based on the Hatta–Taya–Eshelby theory. It has been revealed that dispersion of nanoscale platelets in polymer is effective in improving gas barrier property.     

Ion-velocity dependence of high-density electronic excitation effects in oxide superconductors

Thin films of EuBa₂Cu₃O_y oxide superconductor have been irradiated with high energy heavy ions (80 MeV I, 125 MeV Br, 1.1 GeV Mo and 3.5 GeV Xe) having same electronic stopping power, S_e, in order to investigate the ion-velocity dependence of the electronic excitation effects under the constant electronic energy deposition. Although S_e is constant, a strong reduction in the irradiation effect on lattice parameter with increasing ion-velocity is observed in the low ion-velocity region around E  1 MeV/nucleon, while the ion-velocity dependence is hardly observed in the high ion-velocity region of E > 10 MeV/nucleon. If the observed velocity-dependence is assumed to be due to the change in the fraction of S_e contributing to defect creation, the fraction in the low velocity region (E  0.6 MeV/nucleon) is estimated to be about two times larger than that in the high velocity region (E > 10 MeV/nucleon).     

Narrow-beam divergence 1.3-μm multiple-quantum-well laser diodeswith monolithically integrated tapered thickness waveguide

This paper describes the optimum design, fabrication, and performance of a 1.3-μm multiple-quantum-well (MQW) laser diode monolithically integrated with a tapered thickness spot-size transformer. The dependence of the lasing characteristics on the thickness distribution of the core layer and on the current injection profile of the device were analyzed. This integrated laser with its optimized structure performed at a low threshold current of 22.2 mA, even at 85°C. The integrated spot-size transformer effectively reduced the lateral and vertical far-field FWHM's to 8° and 9°, respectively. A very long lifetime of over 1×10⁵ h was estimated at 85°C and 8 mW under CW operation     

Hydraulic Study of the Onset of Hypoxia in the Tone River Estuary

Field measurements were conducted to investigate the onset and growth of hypoxia in the Tone River Estuary. Vertical profiles of dissolved oxygen (DO), salinity, and temperature were measured along the deepest line of the estuary. Rates of oxygen consumption by water and sediment in a salt wedge were obtained using laboratory tests. The measurements showed that hypoxia frequently occurred in the front part of the salt wedge and expanded its area toward the river mouth during the summer when the river flow rate was small. The data also suggested that the onset of hypoxia was delayed by the estuarine circulation which supplied oxygen-rich seawater to the salt wedge. To simulate this phenomenon, a two-dimensional flow model in the vertical-longitudinal plane was constructed by transversely integrating the k–ε model equations. The results of model simulation for three months in the summer of 1997 closely matched the field data. The model simulation proved that DO degradation is highly correlated with the residence time of salt water in the estuary.     

ST-segment elevation in right precordial leads implies depressed right ventricular function after acute inferior myocardial infarction

BACKGROUND: The prognosis of acute inferior myocardial infarction is worse when it is complicated by right ventricular infarction. ST elevation in the right precordial leads is one of the reliable methods for detecting acute right ventricular infarction. The purpose of the study was to examine the relation between ST elevation in the right precordial electrocardiographic leads during acute inferior infarction and the severity of right ventricular systolic dysfunction. METHODS: This study analyzed the relation between ST elevation > or = 0.1 mV in V4R and the severity of right ventricular systolic dysfunction in 43 consecutive patients (men/women: 35/8; average age 62+/-9 years) with acute inferior myocardial infarction with a rapid-response Swan-Ganz catheter to measure the right ventricular ejection fraction (RVEF). RESULTS: RVEF was significantly lower in patients with ST elevation (n = 18) than in those without (n = 25) (33%+/-6% vs 40%+/-9%, p = 0.010). If the infarct-related lesion was located in the proximal right coronary artery, RVEF tended to be lower than if the lesion was located in the distal right coronary artery or the left circumflex coronary artery (33%+/-10% vs 37%+/-9% vs 42%+/-9%, p = 0.101). Logistic regression analysis demonstrated that ST elevation in V4R was the only independent predictor of depressed RVEF (odds ratio = 5.31, 95% confidence interval = 1.28 to 22.1, p = 0.022). CONCLUSION: ST elevation in lead V4R during acute inferior myocardial infarction predicts right ventricular systolic dysfunction.     

Proposal of an alternating bending technique for evaluating low‐to‐high cycle fatigue of structural steels

This paper proposes an alternating bending technique for evaluating fatigue life in the low‐to‐high cycle fatigue regime. A method was developed for estimating the stress, elastic strain, and plastic strain ranges of a plastically deformed specimen subjected to alternating bending with consideration of stress and strain distributions. To evaluate its effectiveness, fatigue testing was conducted using a specimen made of a steel used for pressure vessels. The stress, elastic strain, and plastic strain ranges could be obtained during cyclic bending. The elastic strain amplitude life and plastic strain amplitude life curves were linear in a log–log plot in the low‐to‐high cycle fatigue regime. Hence, the fatigue life under alternating bending could be evaluated using the proposed strain‐based approach. However, these curves could not be predicted using equations with parameters obtained from tensile testing, such as the universal slope method, due to the strain gradient in the specimen.     

Second harmonic generation of pseudo mode-locked multi ten milliwatt picosecond Ti:sapphire laser

We report the single-pass second harmonic generation (SHG) of the picosecond Ti:sapphire laser with a periodically poled lithium niobate (PPLN) waveguide. We demonstrate a conversion efficiency of 37% for the 9-mW fundamental input power at 820 nm. This laser source can provide three types of pulsed modes such as picosecond, nanosecond, and contiuous wave, by adjusting the power of the pumping source. We compare the conversion efficiency in each mode, and clearly show that SHG efficiency depends on the pulsewidth, that is, the peak power of the laser source. As the temperature of the PPLN rises, the fundamental wavelength for phase-matching becomes longer. We indicate that the rate is about 0.06 nm/K.     

Design of experiments for stacking sequence optimizations with genetic algorithm using response surface approximation

This study describes a new method of experimental design to obtain a response surface of buckling load of laminated composites. Many evaluations for genetic algorithms for stacking sequence optimizations require high computational cost. That evaluation cost can be reduced by an approximation using a response surface. For a response surface for stacking sequence optimizations, lamination parameters are adopted as variables of the approximation function of the entire design space instead of ply angles for each ply. This study presents, proposes and investigates a new method of experimental design in detail. For most analytical tools, stacking sequences is demand as input data and lamination parameters cannot be applied directly to the tools. Therefore, the present study proposes and applies a new D-optimal set of laminates to the stacking sequence optimizations of the problem of maximization of buckling load of a composite cylinder. The new experimental design is a set of stacking sequences selected from candidate stacks using D-optimality. Consequently, the D-optimal set of laminates is shown to be effective for design of experiments of response surfaces for maximization of the buckling load of composite structures.     

An object-oriented database system Jasmine: implementation,application, and extension

We have devised an object oriented DBMS called Jasmine for advanced applications. The paper describes the implementation, application and extension of Jasmine in detail. We focus on the impact of the design of its object oriented model and language on database implementation technology. We describe what part of traditional relational database technology we extend to handle object oriented features such as object identifiers, complex objects, class hierarchies, and methods. We introduce nested relations to efficiently store and access clustered complex objects. We use hash based methods to efficiently access nonclustered complex objects. We provide user defined functions directly evaluated on page buffers to efficiently process method invocation. We devise object oriented optimization of queries including class hierarchies, complex objects, and method invocation. We incorporate dedicated object buffering to allow efficient access to objects through object identifiers. We also describe nontrivial applications of Jasmine and discuss the validity of object oriented databases. We focus on a constraint management facility, which can be implemented by taking advantage of the extensibility of Jasmine. The facility includes constraint rules, called design goals, for automatic database population required by engineering applications. Finally, we describe a view facility for schema integration also needed by engineering applications in distributed environments. We focus on how we extend Jasmine to implement the facility