Determination of horseradish peroxidase concentration using the chemiluminescence of Cypridina luciferin analogue, 2-methyl-6-(p-methoxyphenyl)-3,7-dihydroimidazo[1,2-a]pyrazin-3-one

The chemiluminescence of the Cypridina luciferin analogue, 2-methyl-6-(p-methoxyphenyl)-3,7-dihydroimidazo[1,2-a]pyrazin++ +-3-one (MCLA) was observed at 462 nm in the presence of horseradish peroxidase (HRP) and the total spectrum of light emitted was found to depend linearly on HRP concentration. Methods for the determination of HRP concentration using the chemiluminescence was investigated. HRP could be detected in the range from 100 pmol/L to 100 nmol/L under the optimum condition, H2O2 (10 mmol/L) and MCLA (10 mumol/L) at pH 5.8.     

Electrochemical injection of organic corrosion inhibitors into carbonated cementitious materials: Part 1. Effects on pore solution chemistry

This series of investigations was intended to clarify phenomena associated with electrochemical injection of the organic base corrosion inhibitors, ethanolamine and guanidine, into carbonated concrete. In Part 1, experiments were conducted with laminated specimens of carbonated cement paste, that were specially designed to facilitate analysis with adequate spatial resolution to assess changes in their pore solution phase chemistry after they had been subjected to constant current electrolysis between embedded cathodes and external anodes. The anolyte solutions provided sources of ethanolamine or guanidine in contact with the exterior specimen surfaces. Effects of variations in the applied current density and duration of electrolysis on the concentration profiles of the two inhibitors and the other main constituents of the pore solution phase were determined. The results have been used to underpin the development of a mathematical model, which is described in Part 2.     

Water structure and improved mechanical properties of phospholipid polymer hydrogel with phosphorylcholine centered intermolecular cross-linker

We investigated the water structure and the mechanical properties of 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer hydrogels cross-linked with a novel hydrophilic 2-(methacryloyloxy)ethyl-[N-(2-methacryloyloxy)ethyl]phosphorylcholine (MMPC) for soft contact lenses (SCL) applications and commercial methacrylic cross-linkers were in addition used for comparison with MMPC. Water structure in hydrogels, which influences the protein adsorption by dehydration was determined by differential scanning calorimetry. MMPC increased the freezing water content of the MPC polymer hydrogel compared with hydrophilic N,N′-methylenebisacrylamide (BIS) at the same water content. MMPC also improved fracture strength of the MPC polymer hydrogel to 120 kPa in tensile, which was considerably higher than that hydrogel cross-linked with BIS. It is suggested that MMPC shows higher cross-linking reactivity with MPC than BIS. We concluded that the MMPC increase both the free water content and the tensile properties. The MPC polymer hydrogel cross-linked with MMPC can be a useful SCL biomaterial.     

Ethanol production from raw starch by a recombinant yeast having saccharification and fermentation activities

In order to develop a method for converting raw starch into ethanol efficiently, direct fermentation of ozonized raw starch using a recombinant yeast was investigated. Ozonolysis was carried out as a pretreatment to convert raw starch into ethanol rapidly and efficiently, and then the effect of the ozone degradation conditions on the degree of polymerization and the amount of amylose in a raw starch was determined. Since the degree of polymerization was low and the amount of amylose was high, raw starch treated with an ozone concentration of 40 gm^?3 and an ozonation time of 30 min was the material chosen for alcohol fermentation. Though the recombinant yeast could not convert the untreated raw starch, it converted the soluble starch and the ozonized raw starch at a comparatively high yield into ethanol. About 56% of the ozonized raw starch decomposed, and the ethanol concentration obtained from the ozonized raw starch was markedly greater than that obtained from untreated raw starch. The dynamic behavior of cell growth, substrate degradation, and ethanol production was examined in a continuous culture under various dilution rates, and the optimal dilution rate, ie 0.15 h^?1, was determined for maximizing the ethanol productivity (amount of ethanol produced per unit time). © 2002 Society of Chemical Industry     

Preparation of Aluminum Nitride Powder from Aluminum Polynuclear Complexes

AIN powder was synthesized from aluminum polynuclear complexes. Basic aluminum chloride and basic aluminum lactate were used as the aluminum polynuclear complexes. These starting materials and glucose were dissolved in water and mixed homogeneously. AIN powder was obtained by calcining after drying and precalcining at 800°C under nitrogen gas flow. Then excess carbon was removed by firing in air. Nitridation in the system was investigated and compared with that in the alumina–carbon black system. It was found that in our reaction system nitridation began and proceeded at lower calcination temperatures above 1200°C than in the alumina–carbon black system. Using aluminum polynuclear complexes, AIN was synthesized through the nitridation of γ-alumina and produced in a very fine and sharp particle size distribution.     

Orientation structure in transverse sections of carbon fibers from dehydrated polyvinyl alcohol

Transverse sections of carbon fibers prepared from two different lots of dehydrated polyvinyl alcohol fibers, with and without graphitizing treatment, were observed by both polarized light and scanning electron microscopy. Several different types of transverse layer plane preferred orientation were found in the graphitized fibers: layers aligned parallel with the section major axis in the central zone of elliptical cross sections; parallel with the fiber surface in concave regions of an irregular cross section shape; and parallel with the fiber surface in a highly crystallized fiber with an irregular cross section shape. These graphitic layer plane configurations are considered in connection with the lamellar structure in crystalline regions of the dehydrated polyvinyl alcohol fibers.     

Preparation and characterization of natural rubber dispersed in nano-matrix

Preparation of a model nano-matrix-dispersed polymer was investigated in terms of graft-copolymerization of deproteinized natural rubber latex with styrene, using tert-butyl hydroperoxide/tetraethylenepentamine as an initiator. The products were characterized by ¹H-NMR spectroscopy and size-exclusion-chromatography after ozonolysis. The grafting efficiency of styrene was found to be more than 90% under the best condition of the graft-copolymerization. The morphology of the film specimens, prepared from graft-copolymers, was observed by transmission electron microscopy after staining the films with OsO₄. Natural rubber particle of about 0.5 μm in diameter was dispersed in polystyrene matrix of about 15 nm in thickness.     

Dehydrogenative Cracking of n-Butane over Modified HZSM-5 Catalysts

Dehydrogenative cracking reaction of n-butane was studied using HZSM-5 catalyst modified with various metal oxides. Alkaline earth (magnesium), transition metal (cobalt) and rare earth (lanthanum) elements are used for the modification. The selectivity of the products was studied at low conversion (20%). Methane, ethane, ethylene, propylene, butenes and butadiene were the main products. With the use of the cobalt- or magnesium-containing HZSM-5, dehydrogenative cracking was observed and the selectivity of ethylene was much larger than that of ethane. On the other hand, the selectivity of ethylene and ethane were almost the same in the reaction using the lanthanum-containing HZSM-5. It is considered that the cobalt- and magnesium-loaded sites on HZSM-5 played an important role in the dehydrogenative cracking.     

Patient with unusual Hutchinson-Gilford syndrome (progeria)

A patient with unusual Hutchinson-Gilford syndrome (progeria) is reported. This 7-year-old boy had all the characteristics of progeria, except for coxa valga and the "horse-riding" stance. A previous cerebral infarction was detected in the right putamen on cranial magnetic resonance imaging. During treadmill exercise test electrocardiography, ST depression suggested the existence of arteriosclerotic lesions. Skin fibroblast culture exhibited 76% DNA-repair capacity compared to normal. He has not manifested endocrinologic abnormalities. From these findings it is concluded that this patient has an incomplete case of Hutchinson-Gilford syndrome and that a correlation may exist between the clinical features and the degree of DNA-repair capacity.