Electrical properties and positron annihilation study of (Ba<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Ho<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>)TiO<Subscript>3</Subscript> ceramics

DC resistivity, dielectric constant, dielectric loss and positron annihilation spectra of (Ba_1−x Ho _x )TiO₃ ceramics have been measured as a function of holmium concentration x. It has been found that the DC resistivity of (Ba_1−x Ho _x )TiO₃ is strongly dependent on the Ho content: it decreases three orders of magnitude and reaches a minimum at x = 0.4%. Doping with 0.6% holmium increases the permittivity of BaTiO₃ by approximately three times (from ∼1,300 to ∼4,000), with only a slight increase in the corresponding dielectric loss. The local electron density and defect concentration estimated using positron annihilation technique conforms well to the features found in the dielectric and resistivity measurements. The results have been discussed in terms of a mixed compensation model.     

房屋建筑结构无损检测方法的分析与展望

通过对现有的结构无损检测方法的总结和分析,讨论了各种方法的优缺点.并结合现场测试的要求,展望结构检测技术的发展方向与趋势.     

基于TS101型DSP链路口的多通道高精度数据采集电路设计

介绍一种基于数字信号处理器(DSP)TS101链路口的多通道高精度数据采集电路的设计方法,详细阐述利用多个ADS8361型A/D转换器进行数据采集,并经TS101链路口传输数据的FP-GA和DSP设计实现,讨论如何提高A/D转换精度的问题.     

Design consideration of photocatalytic oxidation reactors using TiO2-coated foam nickels for degrading indoor gaseous formaldehyde

In the design process of the photocatalytic oxidation (PCO) reactor using TiO₂-coated foam nickels, the optimum of catalyst film thickness, light intensity and flow velocity were considered. A model was developed to study the effect of catalyst film thickness on photocatalytic degradation of formaldehyde by a TiO₂-coated foam nickel at continuous flow mode. In this model, external mass transfer and internal molecule diffusion-reaction were considered. A first-order kinetics equation was used to account for the photocatalytic reaction. Two exponential equations were employed to describe the distribution of light intensities in foam nickels and catalyst films, respectively. Validated with experimental data, the model can be used to predict the optimal thickness of catalyst films. A method for determining appropriate light intensities was proposed and discussed. The appropriate light intensity can be obtained by giving a margin, regarded as an excess coefficient, to the light intensity calculated based on the assumption of complete use of excited electron–hole pairs. The excess coefficient needs to be determined experimentally. In addition, the optimal flow velocity of PCO reactors could be consistent with the required one by changing the windward area of foam nickels. Based on the theoretical analyses, a novel PCO reactor containing 15 parallel-connected cells was designed. Each reaction cell was composed of an UV lamp and a TiO₂-coated tubular foam nickel. The performance of the reactor was tested by degrading gaseous formaldehyde at an indoor concentration level. The results showed that the reactor had low pressure loss and good degradation capability.     

我国厨卫产业的新机遇及其发展趋势

自改革开放以来短短20多年中,我国厨卫行业的发展速度是突飞猛进,现在已经成为我国住宅设施行业中支柱性产业之一。在中国房地产及住宅研究会住宅设施委员会资料室所保存的一些历史照片中,可以看到当时的厨卫设备是多么地简陋:厨房灶台就是四根柱子上搭一块水泥预制板、在上面放一     

A Subcarriers Allocation Scheme for Cognitive Radio Systems Based on Multi-Carrier Modulation

Cognitive radio (CR) is a dynamic spectrum access technology as a solution to spectrum under-utilization problem in some licensed bands. Operating over an exceedingly wide spectrum, CR systems usually adopt multi-carrier modulation (MCM) to implement flexible channelization. Consequently, efficient channel allocation scheme becomes extremely important to an MCM based CR (MCM-CR) system. In this paper, a maximum likelihood detection model is developed to detect the presence and locations of licensed users (LUs) signals in the frequency domain. Performance of the detection model, including the optimal detection region, detection probability and false alarm probability, is analyzed. A one-order two-state Markovian chain model is proposed to predict channel status information. In particular, a novel subcarrier allocation scheme for MCM-CR systems is proposed, taking into account the confidence of channel estimation, quality of services (QoS) of rental users (RUs) and throughput. To validate the analytical results, simulations have been conducted to show effectiveness of the proposed scheme.     

抽油机井防污染洗井技术研究与应用

针对抽油机井化学清蜡成本较高、效果不明显，而热洗方式虽然操作容易且成本较低，但洗井时易产生倒灌，使油层受到污染的问题，研究了一种防污染洗井管柱。文中重点介绍了洗井管柱的结构及组成、热洗封隔器的结构及原理、技术指标、试验效果。为解决低渗透油田热洗污染油层的问题，提供了一条有效的途径。     

Cit-CSP及其应用

介绍了Cit-CSP--Cit/E-commerce信息安全保障平台子系统，并阐述了它所提供的消息摘要、块加密、加密(公钥)、签名和MAC等功能和服务。     

Sol-Gel Synthesis of Palladium-Doped Silica Nanocomposite Fiber Using Triton X-100 Micelle Template and the Application for Hydrogen Gas Sensing

Palladium-doped silica nanocomposites were synthesized via a sol-gel technique combined with a template of Triton X-100 micelle. The freshly prepared sol sample of Pd-doped silica nanocomposites was investigated by TEM. Determined from the TEM image, the sizes of the Pd nanoparticles are narrowly distributed, which are around 30 nm in diameter. The prepared sol solution of the sample was injected into a Tygon Microbore Autoanalysis tubing. After 14 days gelatinization, a transparent porous optical fiber was obtained. The response of the fiber to hydrogen gas was tested by using a fiber-optic spectrometric method. The palladium-doped silica nanocomposite fiber is sensitive upon exposure to hydrogen gas and the response is reversible. This palladium-doped silica nanocomposite fiber can be applied as a new kind of hydrogen gas sensor     

安钢集团信息化实施策略探讨

近年来，为了更好地应对新的市场挑战，钢铁企业都在积极推进信息化建设，以实现管理提升、效益提升的目标。本文结合安钢集团的实际情况，对信息化实施策略进行初步的探讨，希望能对企业信息化建设有所借鉴。