Biosorptive removal of cationic dye from aqueous system: a response surface methodological approach

In this study, response surface methodology (RSM) was employed for the removal of methylene blue (MB) from aqueous solution using neem (Azadirachta indica) bark dust (NBD) as a bioadsorbent. The influence of various process parameters namely initial concentration (500–1,000 mg L^?1), bioadsorbent dose [0.20–1.50 g (100 mL)^?1], pH (5–12), and stirring rate (250–650 rpm) was taken as an input parameter. A total of 29 biosorption experimental runs were carried out employing the detailed conditions designed by RSM based on the Box–Behnken design (BBD). Response surface plots were studied to determine the interaction effects of main factors and optimum conditions of process. Regression analysis showed good fit of the experimental data to the second-order polynomial model with coefficient of determination (R ²) value of 0.9760 and model F value of 40.68. The predicted R ² value is 0.8979. In addition, results reported in this research demonstrated the feasibility of employing NBD as bioadsorbent for MB removal.     

Distributed topology management for wireless multimedia sensor networks: exploiting connectivity and cooperation

In this paper, we propose a distributed topology management algorithm, named T‐Must, which orchestrates coalition formation game between camera and scalar sensor (SS) nodes, for use in wireless multimedia sensor networks. In the proposed solution, connectivity among the peer camera sensor (CS) nodes is maintained, and coverage is ensured between them. Only the scalar data are not sufficient to describe an event in a particular monitored area. In many cases, multimedia data (specifically, video data) are required to provide more precise information about the event. As the CS nodes, which sense and transmit multimedia data, are costlier than the SS nodes, the former are deployed in the monitored area in lesser numbers compared to the latter ones. In case of CS nodes, power consumption due to sensing is also significant, similar to power consumption for the transmission and reception of packets. Therefore, in this work, in order to increase the network lifetime, topology is controlled by forming coalition between the CS and SS nodes. Upon occurrence of an event, the SS nodes send scalar data to their associated CS nodes. If the scalar data received from SS nodes cross a preconfigured threshold, the associated CS node in the coalition starts sensing the event, captures the video data, and forwards the video data toward other coalitions or sink. Copyright © 2014 John Wiley & Sons, Ltd.     

Analytical and numerical solution of the longitudinal porous fin with multiple power-law-dependent thermal properties and magnetic effects

The present study is concentrated on the application of electric and magnetic fields on the longitudinal porous fin with power-law-dependent heat transfer coefficient, surface emissivity, and heat generation. The porosity parameter controls the amount of empty spaces or voids in the porous fin and its practical value lies in the range $0\angle \varphi \angle 1$. In industrial application, the heat transfer coefficient is governed by a power law and its specific value defines a certain heat transfer process. The heat generation and surface emissivity of the longitudinal porous fin are assumed to be varied according to the power law and the whole fin is under the influence of an external electric field. The resulting nonlinear equation is solved by the classical Adimian decomposition method (ADM) and the obtained solutions are verified further by the finite difference method (FDM). It has been found that both ADM and FDM are in good agreement for lower values of thermophysical parameters. The effects of power index of heat generation, surface emissivity, and heat transfer coefficient parameter on the temperature distribution, heat flux, and efficiency are analyzed at different values of the porosity parameter comprehensively.     

Novel low-cost approach for removal of surface contamination before texturization of commercial monocrystalline silicon solar cells

This paper reports a novel approach on the surface treatment of monocrystalline silicon solar cells using an inorganic chemical, sodium hypochlorite (NaOCl) that has some remarkable properties. The treatment of contaminated crystalline silicon wafer with hot NaOCl helps the removal of organic contaminants due to its oxidizing properties. The objective of this paper is to establish the effectiveness of this treatment using hot NaOCl solution before the saw damage removal step of the conventional NaOH texturing approach. A comparative study of surface morphology and FTIR analyses of textured monocrystalline silicon surfaces with and without NaOCl pre-treatment is also reported. The process could result in a significant low cost approach viable for cleaning silicon wafers on a mass production scale.     

Puncturing of soft gels with multi-tip needles

Resistance to insertion of a sharp object into a soft solid is known to depend upon the macroscopic geometry of the tool and the consequent fracture mechanisms involved. In this article, we have examined it by carrying out displacement controlled puncturing into soft, brittle polyacrylamide gels using hypodermic needles of different diameters. These experiments show that in contrast to a rigid, flat bottom punch and a punch with sharp tip, for these needles, puncturing of the gel does not occur continuously but intermittently with the fracture progressing alternately in the wedge opening and the shear fracture modes. Correspondingly, the force versus displacement plot too shows sharp increase in load and catastrophic falls, occurring at regular intervals. We have shown that these data can be used to estimate the toughness of the material in both these fracture modes. In addition, we have examined the effect of asymmetry in the needle geometry and importantly the co-operative effect of several closely spaced needles by designing multi-tip needles consisting of several tips of different diameters and relative orientations. Experiments with these needles show that compared to a conventional single tip needle of equivalent diameter, the multi-tip needles penetrate the solid at smaller load with a smaller energy cost for fracture. Importantly, fracture occurs near simultaneously in the two fracture modes, so that the oscillations in the puncturing load is arrested. The lateral fracture of the gel and the consequent excess damage too is minimized.     

Hydrogeochemistry,Elemental Flux,and Quality Assessment of Mine Water in the Pootkee-Balihari Mining Area,Jharia Coalfield,India

Ninety nine mine water discharge samples were collected and analyzed for pH, electrical conductivity (EC), major cations, anions, and trace metals in the Pootkee-Balihari coal mining area of the Jharia coalfield. The mines of the area annually discharge 34.80 × 10⁶ m³ of mine water and 39,099 t of solute loads. The pH of the analyzed mine waters ranged from 6.97 to 8.62. EC values ranged from 711 μS cm⁻¹ to 1862 μS cm⁻¹, and reflect variations in lithology, geochemical processes, and hydrological regimes in the mines. The cation and anion chemistry indicate the general ionic abundance as: Mg²⁺ > Ca²⁺ > Na⁺ > K⁺ and HCO₃ ⁻ > SO₄ ²⁻ > Cl⁻ > NO₃ ⁻ > F⁻, respectively. Elevated SO₄ ²⁻ concentrations in the Gopalichuck, Kendwadih, and Kachhi-Balihari mine waters are attributed to pyrite weathering. The water quality assessment indicated that TDS, hardness, Mg²⁺, and SO₄ ²⁻ are the major parameters of concern in the study area. Except for Fe, all of the measured metals in the mine water were well within the levels recommended for drinking water. With only a few exceptions, the mine water is of good to permissible quality and suitable for irrigation.     

Minimum symbol error rate multiuser detection using an effective invasive weed optimization for MIMO/SDMA–OFDM system

Space division multiple access–orthogonal frequency division multiplexing system has become a potential wireless communication system by offering high spectral efficiency, performance and capacity. This article deals with minimum symbol error rate (MSER)‐based multiuser detection (MUD) technique for the space division multiple access–orthogonal frequency division multiplexing system using an efficient invasive weed optimization (IWO) algorithm. The IWO algorithm is used for finding optimal weights such that the probability of error is directly minimized rather than minimizing the mean square error. Because of this, the MSER MUD is able to detect users even in overload scenario, where the number of users is more than the number of receiving antennas, unlike several classical detection techniques. The IWO is inspired from the nature of invasive colonization of weeds and relatively simple compared with other optimization techniques. The bit error rate performance of the proposed IWO‐aided MSER MUD is found to be better than minimum means square error and differential evolution algorithm‐aided MSER MUDs. Simulation results show that the proposed IWO MSER achieves faster convergence and lower complexity compared with the differential evolution MSER MUD. Copyright © 2013 John Wiley & Sons, Ltd.     

Design and performance study of phase‐locked loop using fractional‐order loop filter

The present work reports the realization of an analog fractional‐order phase‐locked loop (FPLL) using a fractional capacitor. The expressions for bandwidth, capture range, and lock range of the FPLL have been derived analytically and then compared with the experimental observations using LM565 IC. It has been observed that bandwidth and capture range can be extended by using FPLL. It has also been found that FPLL can provide faster response and lower phase error at the time of switching compared to its integer‐order counterpart. Copyright © 2014 John Wiley & Sons, Ltd.