Synthesis of cross-linked graft copolymer from [2-(methacryloyloxy)ethyl] trimethylammonium chloride and poly(vinyl alcohol) for removing chromium(VI) from aqueous solution

A novel graft copolymer of [2-(methacryloyloxy)ethyl] trimethylammonium chloride onto poly(vinyl alcohol) has been synthesized and it is cross-linked by glutaraldehyde for the investigation of its efficiency in removing Cr(VI) from aqueous solution. The chemical nature of the ion-exchange resin has been elucidated with the help of chemical test, Fourier transform infrared, thermo gravimetric analysis and DTA. Particle size, surface area, ion-exchange capacity, optimum pH, reaction time and temperature for Cr(VI) extraction were determined. Chromium(VI) adsorption kinetics, isotherm and thermodynamics have been studied. A plausible mechanism for chromium ion-exchange has been suggested.     

Ru(II)–CO complexes of thioarylazoimidazoles: Syntheses,structures, spectroscopy and DFT calculation

The complexes, cis-(CO)-trans-(Cl)-[Ru(SRaaiNR)(CO)₂Cl₂] (2) and trans-(Cl)-[Ru(SRaaiNR)(CO)Cl₂] (3) (SRaaiNR = 1-alkyl-2-{(o-thioalkyl)phenylazo}imidazoles; R = Me (1a) and Et (1b)) have been synthesized and characterized. The structural confirmation is achieved by single crystal X-ray structure determinations. The complexes show Ru(III)/Ru(II) couple and ligand reductions. Electronic structure and spectral properties of the complexes have been explained with the DFT and TDDFT calculation.     

Risk-Based Evaluation for Meeting Future Water Demand of the Brahmaputra Floodplain Within Bangladesh

A risk-based evaluation is performed for meeting future water demands in the Brahmaputra Floodplain Area within Bangladesh (BFA). This evaluation is carried out using three risk-based performance indicators: reliability, resiliency and vulnerability. The vulnerability indicator has been redefined incorporating the aspect of a supply failure. The analysis includes the impacts of climate change on both water demands and resources, and the generation of synthetic flows of the Brahmaputra River using time series models. The simulated values of the indicators reveal that the expected demand of the BFA up to the year 2050 can be supplied with the proposed Brahmaputra Barrage inside Bangladesh under the ‘no change’ in climatic condition, provided that the groundwater remains usable. However, if groundwater becomes unusable due to widespread arsenic contamination and/or a climate change occurs, it would not be possible to meet the future water demand of the region with high reliability, moderate resiliency and low vulnerability.     

Inverse and efficiency of heat transfer convex fin with multiple nonlinearities

In this article, we first propose the novel semi‐analytical technique—modified Adomian decomposition method (MADM)—for a closed‐form solution of the nonlinear heat transfer equation of convex profile with singularity where all thermal parameters are functions of temperature. The longitudinal convex fin is subjected to different boiling regimes, which are defined by particular values of n (power index) of heat transfer coefficient. The energy balance equation of the convex fin with several temperature‐dependent properties are solved separately using the MADM and the spectral quasi‐linearization method. Using the values obtained from the direct heat transfer method, the unknown parameters of the profile, such as thermal conductivity, surface emissivity, heat generation number, conduction‐convection parameter, and radiation‐conduction parameter are inversely predicted by an inverse heat transfer analysis using the simplex search method. The effect of the measurement error and the number of measurement points has been presented. It is found that present measurement points and reconstruction of the exact temperature distribution of the convex fin are fairly in good agreement.     

Preparation and cell-materials interactions of plasma sprayed strontium-containing hydroxyapatite coating

The use of strontium-containing hydroxyapatite (Sr-HA) as a biomaterial has been reported recently. In vitro and in vivo studies have shown that Sr-HA promotes osteoblast response and stimulates new bone formation. In order to extend its usage to major load-bearing applications, such as artificial hip replacement, it has been proposed that the material could be used in the form of a coating on implant surfaces. This paper reports a preliminary study of biocompatibility of plasma sprayed Sr-HA coatings on a metallic substrate. Coatings of Sr-HA containing 10 mol% Sr²⁺ was produced on titanium alloy substrates. The coating exhibited good bonding with the substrate. The bioactivity of Sr-HA coating was evaluated in vitro by immersion in simulated body fluid (SBF). After immersion in SBF, Sr-HA coating exhibited great ability to induce apatite precipitation on its surface. The possible effects of cell-materials interactions of Sr-HA coating were examined by culturing osteoprecursor cells (OPC1) on coating surfaces. The effect of Sr-HA was also compared to a hydroxyapatite (HA) coating, which is widely used in orthopedics and dentistry. The results indicated that Sr-HA coating had good biocompatibility with human osteoblasts. OPC1 cells survived and proliferated well on the surface of coating. Sr-HA coating promoted OPC1 cells attachment, and more local contacts were produced on the surface. The presence of Sr stimulated OPC1 cell differentiation and ALP expression. No deleterious effect on ECM formation and mineralization was found with Sr-HA coating. The results indicated that Sr-HA coating had good mechanical properties and bioactivity in vitro.     

Investigation on Sodium Benzoate Release from Poly(Butylene Adipate‐Co‐Terephthalate)/Organoclay/Sodium Benzoate Based Nanocomposite Film and Their Antimicrobial Activity

Polymeric nanocomposites embedded with nontoxic antimicrobial agents have recently gained potential industrial significance, mainly for their applicability to preserve food quality and ensure safety. In this study, a poly(butylene adipate‐co‐terephthalate) (PBAT)/organoclay (CMMT) based nanocomposite film doped with sodium benzoate (SB) as antimicrobial agent was prepared by a solution mixing process. A homogenous dispersion of organoclay (cetyltrimethylammonium‐modified montmorillonite [CMMT]) in PBAT matrix was observed by X‐ray diffraction and transmission electron microscopy. PBAT/CMMT nanocomposite film showed higher barrier properties against water and methanol vapor compared to the PBAT film. The release of SB from PBAT and its nanocomposite film was measured and the relevant data were fitted to the Weibull model. The higher values of Weibull's shape factor and scale parameter as corroborated by experimental findings indicated faster rate of SB release from PBAT/CMMT/SB nanocomposite film, when compared to the pristine PBAT film. Bacterial inhibition studies were accomplished against 2 food pathogenic bacteria, Bacillus subtilis and Staphylococcus aureus, by determining the zone of inhibition and corresponding growth profiles. Both bacterial inhibition studies and growth profiles established that PBAT/CMMT/SB demonstrated better antimicrobial activity than PBAT/SB film. Therefore, PBAT/CMMT/SB nanocomposite film can be used for food packaging application as it showed good barrier properties and antimicrobial activity against food pathogenic bacteria.     

Recovery,characterization and conceptual modelling of Non-Bituminous organic materials from oil sands

The hot water process has recovered approximately 90% of the bitumen in oil sands, but the remaining 10% of bitumen and naphtha has been lost to the tailings pond. Recovery of bitumen and non-bituminous combustibles (NBC) from centrifuge, scroll and final tailings has been considered. The effects of four sequestering agents, and of chemical additives such as CaCl₂ and FeCl₃ on the flotation behavior of bitumen, NBC and minerals in these tailings have been investigated. A simple method of isolating NBC materials has been developed. The flotation of both bitumen and NBC was enhanced by phosphate treatment and depressed by EDTA. NBC was characterized by its physical properties, energy content, functionality and chemical analysis. A conceptual model explains the interactions between the bitumen, minerals and NBC fractions present in tailings slurries.     

Multicomponent bulk metal nitride (Nb1/3Ta1/3Ti1/3)N1−δ synthesis via reaction flash sintering and characterizations

In this research, near fully dense single phase bulk multicomponent transition metal nitride (Nb_1/3Ta_1/3Ti_1/3)N_1−δ has been successfully synthesized from mixed commercial powders of NbN, TaN and TiN via reaction flash sintering technique. This was performed with an applied pressure of ~ 35 MPa at 25°C under a constant DC electric field (~24-32 V/cm). The flash event, which is the abrupt increase in current (up to ~ 25.2 A/mm²) and temperature, occurred without preheating. The threshold power dissipation on the sample right before the flash is ~ 0.7 W/mm³. The formation of single phase (Nb_1/3Ta_1/3Ti_1/3)N_1−δ random solid solution and its compositional uniformity were confirmed by XRD and EDS, respectively. The effects of ball milling duration and limiting current density on phase formation were studied. Simulation based on Joule heating provides an estimate of the ultimate sample temperature of ~ 1850°C. Vickers hardness of the obtained (Nb_1/3Ta_1/3Ti_1/3)N_1−δ is 17.6 ± 0.6 GPa, which is comparable to similarly flash sintered ingredient binary nitrides of TaN and NbN. TGA in air shows that the oxidation resistance of (Nb_1/3Ta_1/3Ti_1/3)N_1−δ is better than that of TaN and NbN but inferior to TiN. The study demonstrates that reaction flash sintering can be a highly efficient technique for synthesizing bulk multicomponent ceramics for both material fundamental investigations and application development.     

Cluster-Based RF Fingerprint Positioning Using LTE and WLAN Signal Strengths

Wireless Local Area Network (WLAN) positioning has become a popular localization system due to its low-cost installation and widespread availability of WLAN access points. Traditional grid-based radio frequency (RF) fingerprinting (GRFF) suffers from two drawbacks. First it requires costly and non-efficient data collection and updating procedure; secondly the method goes through time-consuming data pre-processing before it outputs user position. This paper proposes Cluster-based RF Fingerprinting (CRFF) to overcome these limitations by using modified Minimization of Drive Tests data which can be autonomously collected by cellular operators from their subscribers. The effect of environmental changes and device variation on positioning accuracy has been carried out. Experimental results show that even under these variations CRFF can improve positioning accuracy by 15.46 and 22.30% in 95 percentile of positioning error as compared to that of GRFF and K-nearest neighbour methods respectively.     

Experimental investigation of spray characteristics of kerosene and ethanol-blended kerosene using a gas turbine hybrid atomizer

Gas turbines have wide application as prime movers in transportation and power generating sectors, most of which are driven by fossil fuels like kerosene. The conventional fuels are associated with problems of air pollution, and the fuel reserves are getting depleted gradually. Addition of ethanol in kerosene leads to better spraying characteristics. The present work deals with the spray characteristics of pure kerosene and 10%-ethanol-blended (by volume) kerosene using a novel gas-turbine hybrid atomizer. Here the inner air and outer air enter in the same and opposite directions, respectively, with respect to the fuel flow direction into the atomizer and a high swirling effect occurs outside the nozzle. The fuel stream is sandwiched between two annular air streams and the flow rate of inner and outer air is varied continuously. Various spray stages like distorted pencil, onion, tulip and fully developed spray regimes have been observed. The breakup length, cone angle and sheet width of the fuel stream are analysed directly from backlit imaging for different fuel and air flow rates. From the image processing, it is observed that breakup occurs at an early stage for 10%-ethanol-blended kerosene due to low viscosity of ethanol. It is also observed that at higher air flow rate, breakup occurs at an early stage due to turbulent nature of the fuel stream.