Genetic Diversity and Association Analysis for Carotenoid Content among Sprouts of Cowpea (Vigna unguiculata L. Walp)

The development and promotion of biofortified foods plants are a sustainable strategy for supplying essential micronutrients for human health and nutrition. We set out to identify quantitative trait loci (QTL) associated with carotenoid content in cowpea sprouts. The contents of carotenoids, including lutein, zeaxanthin, and β-carotene in sprouts of 125 accessions were quantified via high-performance liquid chromatography. Significant variation existed in the profiles of the different carotenoids. Lutein was the most abundant (58 ± 12.8 mg/100 g), followed by zeaxanthin (14.7 ± 3.1 mg/100 g) and β-carotene (13.2 ± 2.9 mg/100 g). A strong positive correlation was observed among the carotenoid compounds (r ≥ 0.87), indicating they can be improved concurrently. The accessions were distributed into three groups, following their carotenoid profiles, with accession C044 having the highest sprout carotenoid content in a single cluster. A total of 3120 genome-wide SNPs were tested for association analysis, which revealed that carotenoid biosynthesis in cowpea sprouts is a polygenic trait controlled by genes with additive and dominance effects. Seven loci were significantly associated with the variation in carotenoid content. The evidence of variation in carotenoid content and genomic regions controlling the trait creates an avenue for breeding cowpea varieties with enhanced sprouts carotenoid content.     

Purification of novel anti-inflammatory peptides from enzymatic hydrolysate of the edible microalgal Spirulina maxima

Natural bioactive peptides have been known as ingredients in nutraceuticals and pharmaceuticals. In this study, the potential anti-inflammatory peptides were purified from enzymatic hydrolysate of the edible microalgae Spirulina maxima using gastrointestinal endopeptidases (trypsin, α-chymotrypsin, and pepsin). Purification of the hydrolysate resulted in two peptides with amino acid sequences of LDAVNR (P1, 686 Da) and MMLDF (P2, 655 Da). It was found that peptides P1 and P2 exhibited significant inhibition on the release and production of histamine from antigen-stimulated RBL-2H3 mast cells. Moreover, the suppressive effect of P1 and P2 on production as well as expression of interleukin-8 in histamine-stimulated EA.hy926 endothelial cells was determined. Notably, the production of intracellular reactive oxygen species from mast cells and endothelial cells was decreased in the presence of P1 or P2. Collectively, the peptides P1 and P2 from S. maxima could be used as functional ingredients with potent anti-inflammatory benefits.     

Microbial removal of Fe(III) impurities from clay using dissimilatory iron reducers

Fe(III) impurities, which detract refractoriness and whiteness from porcelain and pottery, could be biologically removed from low-quality clay by indigenous dissimilatory Fe(III)-reducing microorganisms. Insoluble Fe(III) in clay particles was leached out as soluble Fe(II), and the Fe(III) reduction reaction was coupled to the oxidation of sugars such as glucose, maltose and sucrose. A maximum removal of 44-45% was obtained when the relative amount of sugar was 5% (w/w; sugar/clay). By the microbial treatment, the whiteness of the clay was increased from 63.20 to 79.64, whereas the redness was clearly decreased from 13.47 to 3.55.     

Factors affecting production of extracellular carbohydrate complexes by Escherichia coli O157:H7

Production of extracellular carbohydrate complexes (ECC) by foodborne pathogens on raw fruits and vegetables may result in protection against removal or inactivation by sanitizers. The influence of environmental conditions on cell growth, the total amount of ECC produced, and the amount of ECC produced on a per cell basis by Escherichia coli O157:H7 strains ATCC 43895 (wild type) and 43895-exopolysaccharides (EPS) (natural mutant, extensive EPS producer) was studied. To determine the effects of pH on the production of ECC on a per cell basis, E. coli O157:H7 was grown aerobically at 12 and 22 degrees C on tryptic soy agar (TSA) acidified to pH 7.0, 6.5, 6.0, 5.5, 5.0, 4.5, and 4.0. Lettuce, alfalfa sprout, cantaloupe, tomato, and apple juice agars (pH 4.46-6.50) were also evaluated for their support of the ECC production. Conditions generally favorable for growth of E. coli O157:H7 were a rich nutrient medium (TSA) vs. heated lettuce juice agar (HLJA) or minimal salts medium (MSM), 22 degrees C compared to 12 degrees C, and an aerobic atmosphere compared to modified atmosphere (1% O(2), 10% CO(2), and 89% N(2)). Conditions favorable for production of ECC on a per cell basis were HLJA, 12 degrees C, and an aerobic atmosphere. This suggests that modified atmosphere packaging of lettuce may not only decrease the growth of E. coli O157:H7 but also its propensity to form biofilm. There was a negative relationship between cell growth and production of ECC on a per cell basis, and environmental conditions that affected the total amount of ECC produced based on initial population reflected a combination of environmental conditions influencing both cell growth and ECC production on a per cell basis. A relative growth index factor (RGIF) was calculated to better understand ECC production as affected by various environmental conditions simultaneously. The production of ECC on a per cell basis by strain 43895-EPS showed a negative linear relationship with pH of TSA at both 12 and 22 degrees C. This strain generally produced a greater amount of ECC on fresh juice agar than on TSA at the same pH, but production of ECC on alfalfa sprout juice agar (FJA, pH 6.45) at 22 degrees C was significantly less than on TSA (pH 6.50). This indicates that nutrient limitation is not based only on nutrient availability. There may be other factors that repress the production of ECC on FJA, and the effects of those factors may be temperature dependent. Further studies will be required to better understand the relationship between nutrient availability and other factors on the production of ECC by E. coli O157:H7 on raw produce.     

Photoluminescence and LED application of β-SiAlON:Eu2+ green phosphor

We successfully prepared β-SiAlON:Eu²⁺ phosphors with composition of Eu_xSi_6?zAl_zO_yN_8?y (y = z ? 2x, x = 0.018, z = 0.23) by gas-pressured synthesis for application to LED. The crystal phase, microstructure, PL emission and thermal quenching properties were investigated in detail. The β-SiAlON:Eu²⁺ phosphors absorbed broad UV–vis spectral region, and showed a single intense broadband emission near 538 nm. The Stokes shift and zero-phonon line were calculated mathematically, and also estimated from the spectral data. The β-SiAlON:Eu²⁺ green phosphor showed superior thermal quenching properties compared to commercial silicate (SrBaSiO₄:Eu²⁺) green phosphor. The white light-emitting diode (LED) using the prepared β-SiAlON:Eu²⁺ green phosphor exhibited high color gamut, and good optical stability in high working temperature.     

Lower Tropospheric Aerosol Measurements by MAX-DOAS During Severe Asian Dust Period

A recently developed aerosol retrieval algorithm based on O₄ slant column densities (SCDs) measured at a visible wavelength (476 nm) was utilized to derive aerosol information (e.g., aerosol optical depth (AOD) and vertical distributions of aerosol extinction coefficients (AECs)) in the lower troposphere during a severe Asian dust period. The MAX-DOAS measurements were carried out at Gwangju, Korea for nearly three months from February through May 2008. Comparison with AOD and surface PM₁₀, measured by collocated sunphotometer and beta gauge sampler, were made to validate the retrieved AODs and AECs in the atmospheric layer surface to 1 km height above ground. On the Asian dust days, temporal variations of the AODs retrieved from MAX-DOAS measurements show similar patterns, but with reduced magnitudes, to those measured by sunphotometer whereas similar AOD magnitude and temporal variation was observed between MAX-DOAS and sunphotometer measurements during the non-episodic days. Smaller correlation was observed between the surface PM₁₀ and AECs at 0.5 km during the Asian dust period compared to the correlation obtained for the non episodic days. This study demonstrates the ability of MAX-DOAS as a remote sensing technique for surface aerosol measurements under conditions of homogeneously distributed pollution in the planetary boundary layer. However, for the measurement of significantly enhanced aerosol loads with heterogeneous vertical distribution (e.g., Asian dust), measured AODs and AECs are underestimated at altitudes above 1 km due to decreased sensitivity of MAX-DOAS measurements at high altitudes.     

Development and characterization of covalently cross-linked SPEEK/Cs-TPA/CeO2 composite membrane and membrane electrode assembly for water electrolysis

Covalently cross-linked SPEEK/Cs-TPA/CeO₂ composite membrane was prepared for the polymer electrolyte membrane water electrolysis. Tungstophosphoric acid (TPA) with a cesium was added to the SPEEK to increase proton conductivity. CeO₂ was used to scavenge free radicals which attack the membrane in the water electrolysis and to improve the durability of the membrane. The composite membrane featured the electrochemical characteristics, such as 0.130 S/cm of proton conductivity at 80 °C, and 2.324 meq./g-dry-memb. of ion-exchange capacity. Pt(NH₃)₄Cl₂, Pd(NH₃)₄Cl₂, RhCl₃ and Co(NH₆)₄Cl₃ were used to prepare a variety of the membrane electrode assemblies (MEAs) as electrocatalytic precursors. Electrochemical activity surface area (ESA) of the Pt–Pd electrode prepared with 2 mM Pt(NH₃)₄Cl₂ and 2 mM Pd(NH₃)₄Cl₂ showed the best properties of 26.2 m²/g with CL-SPEEK/Cs-TPA/CeO₂ membrane. In water electrolysis performance, the cell voltage of Pd/PEM/Pt–Pd MEA with CL-SPEEK/Cs-TPA/CeO₂(1%) composite membrane showed cell property of 1.82 V at 1 A cm⁻² and 80 °C.     

Effect of substrate on the phase transformation of TiO2 in pearlescent pigment

The TiO₂/substrate pearlescent pigments were prepared by the hydrolysis of TiOCl₂ on the substrate followed by a calcinations process. The natural mica (muscovite), synthetic mica (fluorophlogopite) and -alumina flake were selected as the substrates for pearlescent pigments. The effect of substrate on the anatase to rutile (A–R) phase transformation of TiO₂ was studied. The A–R phase transformation of TiO₂ during the preparation of pearlescent pigments and their proportion in the TiO₂ layer have been analyzed by XRD measurements. The phase compositions of TiO₂ layer in each pearlescent pigment are quite different depending on the substrates. The TiO₂ layer deposited on -alumina has higher rutile fraction than those on the natural and synthetic mica. The XPS analysis showed that the cations originally present in the substrates diffused into the TiO₂ layer. The TiO₂ layer deposited on -alumina contains Al, while those on the natural and synthetic mica substrates contain Si and K in addition to Al. The metal cations diffusing from the substrate into TiO₂ layer might retard the A–R phase transformation of TiO₂. The suppressing effect on the A–R transformation of TiO₂ by mixed cations seems to be much stronger than that of single cation, resulting in relatively higher rutile fraction in the case of TiO₂ layer deposited on -alumina.     

Characteristics of polystyrene/polyethylene/clay nanocomposites prepared by ultrasound‐assisted mixing process

In this study, polymer‐clay nanocomposites of various concentrations were prepared by ultrasonically assisted polymerization and melt‐mixing processes. A sonication process using power ultrasonic waves was employed to enhance nano‐scale dispersion during melt‐mixing of polymer blends and organically modified clay. We expected enhanced breakup of layered silicate bundles and further reduction in the size of the dispersed phase, with better homogeneity compared to the different immiscible blend pairs. X‐ray diffraction (XRD) and Transmission Electron Microscopy (TEM) were used to characterize the structures of the nanocomposites. The rheological behaviors of the obtained nanocomposites were measured with parallel plate rheometry. It was found that the ultrasound‐assisted process successfully generated exfoliated nanocomposites and promoted in‐situ compatibilization of the matrix comprising an immiscible pair of polymers in a blend. The resulting nanocomposite exhibited superior thermal stability and elastic modulus compared to the base polymer. Polym. Eng. Sci. 44:1198–1204, 2004. © 2004 Society of Plastics Engineers.