The Effect of Tb80Fe20/Al Co-adding on Coercivity and Thermal Stability in Sintered Nd–Fe–B Magnets

Journal of Superconductivity and Novel Magnetism - The influence of Tb80Fe20/Al co-adding on coercivity and temperature stability of sintered Nd–Fe–B magnets was studied. Compared with...     

Application of distributed motion estimation for swarm MAVs in a GPS-restricted environment based on a wireless sensor network

The Journal of Supercomputing - To meet the requirements for motion estimation of a swarm of micro-aerial vehicles in a GPS-restricted environment, a distributed motion estimation algorithm is...     

Path planning of nanorobot: a review

Microsystem Technologies - Efficient and accurate path planning in a complex biological environment have become a challenge for nanorobot research. This paper first reviews the current path...     

Self-defective ZnS mediated charge transfer for bran-new inter-step mode with boosted photoactivity and enhanced photostability

The appropriate interfacial contact and charges transfer mode of heterojunction photocatalysts were critical for high-efficiency hydrogen production. Inter-step mode heterojunction composite had advantages of enhanced visible-light response, improved charge space separation rate, increased electron utilization, which could also protect catalyst anode from photocorrosion. Zinc-vacancy-rich ZnS decorated CdS heterojunction photocatalyst with inter-step mode was constructed in order to fundamentally enhance photocatalytic performance and overcome photocorrosion of CdS. The charge transfer mode was modulated from pervasive type-II to bran-new inter-step mode by defect engineering. Zinc vacancies functioned as acceptor level for charge separation and up-shifted conduction and valance band energy of ZnS. The defective engineered CdS/ZnS heterojunction displayed a reduced over-potential and enhanced photocatalytic activity. The optimal photocatalytic hydrogen production rate for CdS/ZnS reached 42.1 mmol?g^?1 under visible light without any co-catalyst. An apparent quantum yield (AQY) of 38.75% at 450 nm was achieved, which was 269.3 and 71.9 times higher than pristine zinc-vacancy-rich ZnS and CdS, respectively. Meanwhile, holes aggregated on the surface of CdS were blocked and the oxidation corrosion process was suppressed. The charge transfer mechanism and kinetics of charge transfer and separation in inter-step mode heterojunction photocatalysts were investigated and discussed. This work will accelerate practical applications of photocatalysis with inter-step mode and give deep insights into understanding how inherent acceptor levels play a role in designing defect-engineered semiconductor with enhanced photocatalytic performance.     

Study on the uniformity of water film in a transpiring wall reactor for supercritical water oxidation

A three-dimensional computational fluid dynamic model of a transpiring wall reactor for supercritical water oxidation has been built to optimize the uniformity of water film. Results show that the temperature and species distributions at the nozzle outlet deviate from the reactor centre. The inner wall of the porous tube near the transpiring water injection tube displays low temperatures, while high temperatures are recorded far from the injection tube. The circumferential temperature distribution on the inner wall of the porous tube is uneven. This phenomenon is due to the uneven injection of the transpiring water, leading to the uneven protection of the water film and local overheating of the porous wall. The injection velocity of the transpiring water significantly decreases when the number of injection tubes is increased, and the circumferential velocity and temperature distributions on the porous wall gradually become even. Moreover, high pressure drops across the porous wall at low porosities are useful for the uniform injection of the transpiring water. This characteristic is also conducive to obtaining a more uniform water film protection.     

The protein properties of germinated naked barley with infrared and hot air-drying and its noodle-making potential

The naked barley was germinated and then carried out with hot air- or infrared drying to explore the physicochemical and functional properties of protein isolated from barley. Moreover, the relationship between protein and the noodles made from wheat and germinated barley flour was evaluated. It was found that germination affected the protein properties, and the protein properties were correlated with the properties of noodles. The content of β-sheet in protein was first increased and then decreased with germination time increased, and the protein had larger emulsification and foaming properties. Besides, the protein isolated from hot air-dried germinated barley had higher gelatinisation enthalpy and secondary structure content. Furthermore, the wheat and germinated barley mixed noodles had increased elasticity and cohesiveness and reduced viscosity and water absorption. The hardness of noodles showed was positively correlated with water absorption capacity, and the extensibility of cooked noodles was positively correlated with the foaming capacity of proteins.     

基于STM32在喷绘机喷头控制系统的设计与实现

选取STM32系列STM32F103RBT6作为喷头的主控制系统,将24c16EEPROM作为外部存储器,通过I2C通信机制传送喷头T-V数据和配置数据,借助UART或128x64LCD达到人机交互。经过理论分析和软硬件结合测试,验证了该喷头控制系统的可行性和方便性。     

The Activity of Small Urea-γ-AApeptides Toward Gram-Positive Bacteria

Host Defense Peptides (HDPs) have gained considerable interest due to the omnipresent threat of bacterial infection as a serious public health concern. However, development of HDPs is impeded by several drawbacks, such as poor selectivity, susceptibility to proteolytic degradation, low-to-moderate activity and requiring complex syntheses. Herein we report a class of lipo-linear α/urea-γ-AApeptides with a hybrid backbone and low molecular weight. The heterogeneous backbone not only enhances chemodiversity, but also shows effective antimicrobial activity against Gram-positive bacteria and is capable of disrupting bacterial membranes and killing bacteria rapidly. Given their low molecular weight and ease of access via facile synthesis, they could be practical antibiotic agents.     

Polybutylene terephthalate modified with dimer acid methyl ester derived from fatty acid methyl esters and its use as a hot-melt adhesive

A series of polyester copolymers was synthesized via melt polycondensation of dimethyl terephthalate (DMT), dimethyl isophthalate (DMI), and 1,4-butanediol (BDO) with dimer acid methyl ester (DAME) monomers, previously prepared by the Diels–Alder reaction of fatty acid methyl esters (FAMEs). We obtained copolymers with the desired composition and a high molar mass characterized by ¹H NMR, FT-IR, and SEC. The relationship among the composition, thermal behavior, mechanical properties, and adhesion properties of these copolymers was examined, demonstrating that the DAME-modified copolymers could be substituted for HMA applications and are comparable to petroleum-based commercial products. As a result, these polyesters could offer improved sustainability and performance and may be good candidates for hot-melt adhesive materials. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48474.