Studying the Impact of Persistent Organic Pollutants Exposure on Human Health by Proteomic Analysis: A Systematic Review

Persistent organic pollutants (POPs) are organic chemical substances that are widely distributed in environments around the globe. POPs accumulate in living organisms and are found at high concentrations in the food chain. Humans are thus continuously exposed to these chemical substances, in which they exert hepatic, reproductive, developmental, behavioral, neurologic, endocrine, cardiovascular, and immunologic adverse health effects. However, considerable information is unknown regarding the mechanism by which POPs exert their adverse effects in humans, as well as the molecular and cellular responses involved. Data are notably lacking concerning the consequences of acute and chronic POP exposure on changes in gene expression, protein profile, and metabolic pathways. We conducted a systematic review to provide a synthesis of knowledge of POPs arising from proteomics-based research. The data source used for this review was PubMed. This study was carried out following the PRISMA guidelines. Of the 742 items originally identified, 89 were considered in the review. This review presents a comprehensive overview of the most recent research and available solutions to explore proteomics datasets to identify new features relevant to human health. Future perspectives in proteomics studies are discussed.     

Generation of Functional Immortalized Human Corneal Stromal Stem Cells

In addition to their therapeutic potential in regenerative medicine, human corneal stromal stem cells (CSSCs) could serve as a powerful tool for drug discovery and development. Variations from different donors, their isolation method, and their limited life span in culture hinder the utility of primary human CSSCs. To address these limitations, this study aims to establish and characterize immortalized CSSC lines (imCSSC) generated from primary human CSSCs. Primary CSSCs (pCSSC), isolated from human adult corneoscleral tissue, were transduced with ectopic expression of hTERT, c-MYC, or the large T antigen of the Simian virus 40 (SV40T) to generate imCSSC. Cellular morphology, proliferation capacity, and expression of CSSCs specific surface markers were investigated in all cell lines, including TNFAIP6 gene expression levels in vitro, a known biomarker of in vivo anti-inflammatory efficacy. SV40T-overexpressing imCSSC successfully extended the lifespan of pCSSC while retaining a similar morphology, proliferative capacity, multilineage differentiation potential, and anti-inflammatory properties. The current study serves as a proof-of-concept that immortalization of CSSCs could enable a large-scale source of CSSC for use in regenerative medicine.     

Synthesis of an Anti-CD7 Recombinant Immunotoxin Based on PE24 in CHO and E. coli Cell-Free Systems

Recombinant immunotoxins (RITs) are an effective class of agents for targeted therapy in cancer treatment. In this article, we demonstrate the straight-forward production and testing of an anti-CD7 RIT based on PE24 in a prokaryotic and a eukaryotic cell-free system. The prokaryotic cell-free system was derived from Escherichia coli BL21 Star^TM (DE3) cells transformed with a plasmid encoding the chaperones groEL/groES. The eukaryotic cell-free system was prepared from Chinese hamster ovary (CHO) cells that leave intact endoplasmic reticulum-derived microsomes in the cell-free reaction mix from which the RIT was extracted. The investigated RIT was built by fusing an anti-CD7 single-chain variable fragment (scFv) with the toxin domain PE24, a shortened variant of Pseudomonas Exotoxin A. The RIT was produced in both cell-free systems and tested for antigen binding against CD7 and cell killing on CD7-positive Jurkat, HSB-2, and ALL-SIL cells. CD7-positive cells were effectively killed by the anti-CD7 scFv-PE24 RIT with an IC₅₀ value of 15 pM to 40 pM for CHO and 42 pM to 156 pM for E. coli cell-free-produced RIT. CD7-negative Raji cells were unaffected by the RIT. Toxin and antibody domain alone did not show cytotoxic effects on either CD7-positive or CD7-negative cells. To our knowledge, this report describes the production of an active RIT in E. coli and CHO cell-free systems for the first time. We provide the proof-of-concept that cell-free protein synthesis allows for on-demand testing of antibody–toxin conjugate activity in a time-efficient workflow without cell lysis or purification required.     

Comparison of antimicrobial resistance of Campylobacter jejuni isolated from humans, chickens, raw milk, and environmental water in Québec

This study compares the occurrence of antimicrobial resistance to erythromycin, ciprofloxacin, and tetracycline among 384 Campylobacter jejuni isolates from humans (245), fresh whole retail chickens (56), raw milk (33), and environmental water (41) collected between 2000 and 2003 in Québec, Canada. Resistance to ciprofloxacin was significantly more frequent in human isolates acquired abroad than in those acquired locally (50 versus 5.9%; P < 0.001); ciprofloxacin resistance was almost absent in water, chicken, and raw milk isolates. In contrast, resistance to erythromycin was significantly more common in chicken than in locally acquired human isolates (16 versus 3.0%, respectively; P < 0.001); no erythromycin resistance was found among water, raw milk, and human isolates acquired abroad. Resistance to tetracycline was significantly more common in chicken and human isolates acquired locally (58.9 and 45.8%, respectively) than in raw milk and water isolates (9.1 and 7.3%, respectively, P < 0.001). Tetracycline resistance was also observed in 44.4% of human isolates acquired abroad. No human isolate was resistant to both ciprofloxacin and erythromycin, but one chicken isolate was resistant to all three antimicrobial agents. Our results suggest that from 2000 to 2003 in Québec, antimicrobial resistance remained stable among locally acquired C. jejuni human clinical isolates and might even have decreased. However, the high erythromycin resistance rate observed among chicken isolates is concerning because of the risk of transmission of such isolates to humans. Additional studies are needed to monitor trends in antimicrobial resistance among food, environment, and human C. jejuni isolates as well as antibiotic use in animals.     

Antimicrobial Activity of Nisin and Natamycin Incorporated Sodium Caseinate Extrusion‐Blown Films: A Comparative Study with Heat‐Pressed/Solution Cast Films

Antimicrobial edible films based on sodium caseinate, glycerol, and 2 food preservatives (nisin or natamycin) were prepared by classical thermomechanical processes. Food preservatives were compounded (at 65 °C for 2.5 min) with sodium caseinate in a twin‐screw extruder. Anti‐Listeria activity assays revealed a partial inactivation of nisin following compounding. Thermoplastic pellets containing food preservatives were then used to manufacture films either by blown‐film extrusion process or by heat‐press. After 24 h of incubation on agar plates, the diameters of K. rhizophila growth inhibition zones around nisin‐incorporated films prepared by solution casting (control), extrusion blowing or heat pressing at 80 °C for 7 min of nisin‐containing pellets were 15.5 ± 0.9, 9.8 ± 0.2, and 8.6 ± 1.0 mm, respectively. Since heat‐pressing for 7 min at 80 °C of nisin‐incorporated pellets did not further inactivate nisin, this indicates that nisin inactivation during extrusion‐blowing was limited. Moreover, the lower diameter of the K. rhizophila growth inhibition zone around films prepared with nisin‐containing pellets compared to that observed around films directly prepared by solution casting confirms that nisin inactivation mainly occurred during the compounding step. Natamycin‐containing thermoplastic films inhibited Aspergillus niger growth; however, by contrast with nisin‐containing films, heat‐pressed films had higher inhibition zone diameters than blown films, therefore suggesting a partial inactivation of natamycin during extrusion‐blowing.     

Refining Genotypes and Phenotypes in KCNA2-Related Neurological Disorders

Pathogenic variants in KCNA2, encoding for the voltage-gated potassium channel K_v1.2, have been identified as the cause for an evolving spectrum of neurological disorders. Affected individuals show early-onset developmental and epileptic encephalopathy, intellectual disability, and movement disorders resulting from cerebellar dysfunction. In addition, individuals with a milder course of epilepsy, complicated hereditary spastic paraplegia, and episodic ataxia have been reported. By analyzing phenotypic, functional, and genetic data from published reports and novel cases, we refine and further delineate phenotypic as well as functional subgroups of KCNA2-associated disorders. Carriers of variants, leading to complex and mixed channel dysfunction that are associated with a gain- and loss-of-potassium conductance, more often show early developmental abnormalities and an earlier onset of epilepsy compared to individuals with variants resulting in loss- or gain-of-function. We describe seven additional individuals harboring three known and the novel KCNA2 variants p.(Pro407Ala) and p.(Tyr417Cys). The location of variants reported here highlights the importance of the proline(405)–valine(406)–proline(407) (PVP) motif in transmembrane domain S6 as a mutational hotspot. A novel case of self-limited infantile seizures suggests a continuous clinical spectrum of KCNA2-related disorders. Our study provides further insights into the clinical spectrum, genotype–phenotype correlation, variability, and predicted functional impact of KCNA2 variants.     

Aminolysis of Aziridines Catalyzed by Samarium Iodides

Abstract  

Samarium diiodide is an efficient catalyst for the aminolysis of either activated or non activated aziridines with aromatic amines. A variety of N-diprotected β-diamines has been prepared including new products. The comparison of the N-protecting groups of aziridines in reactions catalyzed by samarium diiodide or by samarium iodobinaphtholate indicates that N-Boc protection leads to the best results.     

Comparative In Vitro Osteoinductivity Study of HA and α‐TCP/HA Bicalcium Phosphate

A bicalcium phosphate (BCP) bioceramic comprising α‐tricalcium phosphate (α‐TCP) and hydroxyapatite (HA) was prepared by a two‐step sintering. The microstructure of the BCP bioceramic was investigated using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X‐ray diffraction. The in vitro osteoinductivity was evaluated by culturing MG63 osteoblast‐like cells on the BCP bioceramic. Results showed that the BCP bioceramic comprising α‐TCP and HA in a moderate ratio possessed a hardness of 93.7 Hv. The cells spread faster on the BCP bioceramic than those on the commercial HA. It suggested that the BCP bioceramic can enhance osteoinductivity in vivo.     

Use of a new natural clay to produce poly(methyl methacrylate)‐based nanocomposites

Nanocomposites of poly(methyl methacrylate) (PMMA) filled with 3 wt% of modified natural Algerian clay (AC; montmorillonite type) were prepared by either in situ polymerization of methyl methacrylate initiated by 2,2′‐azobisisobutyronitrile or a melt‐mixing process with preformed PMMA via twin‐screw extrusion. The organo‐modification of the AC montmorillonite was achieved by ion exchange of Na⁺ with octadecyldimethylhydroxyethylammonium bromide. Up to now, this AC montmorillonite has found applications only in the petroleum industry as a rheological additive for drilling muds and in water purification processes; its use as reinforcement in polymer matrices has not been reported yet. The modified clay was characterized using X‐ray diffraction (XRD), which showed an important shift of the interlayer spacing after organo‐modification. The degree of dispersion of the clay in the polymer matrix and the resulting morphology of nanocomposites were evaluated using XRD and transmission electron microscopy. The resulting intercalated PMMA nanocomposites were analysed using thermogravimetric analysis and differential scanning calorimetry. The glass transition temperature of the nanocomposites was not significantly influenced by the presence of the modified clay while the thermal stability was considerably improved compared to unfilled PMMA. This Algerian natural montmorillonite can serve as reinforcing nanofiller for polymer matrices and is of real interest for the fabrication of nanocomposite materials with improved properties. Copyright © 2009 Society of Chemical Industry     

Cable tray FIRE tests simulations in open atmosphere and in confined and mechanically ventilated compartments with the CALIF3S/ISIS CFD software

Fire hazard in nuclear power plants (NPPs) is particularly often investigated as potential cause of safety equipment failure and confinement loss. Many fire events recorded in NPPs involve electric cables, widely used throughout facilities. IRSN is developing the CALIF3S/ISIS computational fluid dynamics software devoted to fire simulation in large‐scale confined and mechanically ventilated compartments. This paper presents two aspects of the CALIF3S/ISIS code ability to simulate fires. The first one concerns vertical and horizontal spreading of a cable tray fire in open atmosphere using an approach based on the FLASH‐CAT cable fire spread model. Resorting to the suitable parameters of the FLASH‐CAT model based on video fire analyses of tests enables to properly compute the heat release rate of the fire. The second aspect concerns the ability to simulate the evolution and consequences of fires in confined and mechanically ventilated compartments. For these cases, the heat release rate measured during the corresponding experiment is used as input data for the calculations. The predicted evolutions of pressure or gas temperatures are in relatively good accordance with the experiments. The major discrepancy concerns gas concentrations in the fire room which is attributed to a lack of information about the properties of the fuel material.