Optical acceptance function of modified compound parabolic concentrators with linear corrugated reflectors

For reflective cylindrical concentrators the acceptance function, as determined in the meridian plane, remains constant for more oblique planes of incidence. However, if the reflective surface has a linear corrugated structure, it is possible to increase the acceptance in the meridian plane at the expense of reduced acceptance at a more oblique incidence. A ray-tracing study has been performed on the optical properties of troughlike compound parabolic concentrators (CPC's) with linear corrugated reflectors. Calculations of angular acceptance for a modified CPC with concentration C = x is presented. A possible application of this new concentrator is as a secondary concentrator for tracking parabolic troughs.     

T-matrix computations of light scattering by red blood cells

The electromagnetic far field, as well as the near field, originating from light interaction with a red blood cell (RBC)volume-equivalent spheroid, was analyzed by utilizing theT-matrix theory. This method is a powerful tool thatmakes it possible to study the influence of cell shape on the angulardistribution of scattered light. General observations were that thethree-dimensional shape, as well as the optical thickness apparent tothe incident field, affects the forward scattering. Thebackscattering was influenced by the shape of the surface facing theincident beam. Furthermore sphering as well as elongation of anoblate RBC into a volume-equivalent sphere or a prolate spheroid, respectively, was theoretically modeled to imitate physiologicalphenomena caused, e.g., by heat or the increased shear stress offlowing blood. Both sphering and elongation were shown to decreasethe intensity of the forward-directed scattering, thus yielding lowerg factors. The sphering made the scattering patternindependent of azimuthal scattering angle phi(s), whereas the elongation induced more apparent phi(s)-dependent patterns. The lightscattering by a RBC volume-equivalent spheroid was thus found to behighly influenced by the shape of the scattering object. Anear-field radius r(nf) was evaluated as thedistance to which the maximum intensity of the total near field haddecreased to 2.5 times that of the incident field. It was estimatedto 2-24.5 times the maximum radius of the scattering spheroid, corresponding to 12-69 mum. Because the near-field radiuswas shown to be larger than a simple estimation of the distance betweenthe RBC's in whole blood, the assumption of independent scattering, frequently employed in optical measurements on whole blood, seemsinappropriate. This also indicates that one cannot extrapolate theresults obtained from diluted blood to whole blood by multiplying witha simple concentration factor.     

Efficient Nd:YAG Laser Frequency Doubling with Periodically Poled KTP

Periodically poled flux-grown KTiOPO(4) was used for efficient extracavity 1064-nm Nd:YAG laser frequency doubling. A conversion efficiency exceeding 65% was obtained in Q-switched operation, and 1.34 W of average frequency-doubled power was generated with 2.2 W of mode-locked laser output. The conversion efficiency is approximately two times higher for periodically poled KTP than for conventional type II phase-matched KTP. The measurements indicate that periodically poled KTP is less susceptible to optical damage than type II KTP.     

Development of a Solid Phase Carbon Trap for Simultaneous Determination of PCDDs, PCDFs, PCBs, and Pesticides in Environmental Samples Using SFE-LC

The purpose of this study was to find materials that can be used as a solid phase trap in a commercial supercritical fluid extraction instrument. PX-21 active carbon mixed with ODS proved to yield the best results. After SFE of the target compounds, the planar fraction containing the environmental pollutants PCDDs, PCDFs, and planar PCBs was successfully separated on a PX-21 solid phase trap from the nonplanar fraction containing the other PCBs and pesticides. Direct injection of the concentrated fractions on GC/MS was possible without further cleanup. SFE followed by on-line carbon column chromatography was tested using standard solutions (applied on filter paper) as well as biological samples (human adipose tissue).     

Measurements of indoor and outdoor nitrogen dioxide concentrations using a diffusive sampler

The Willems badge, a short-term diffusion sampler, was used to measure nitrogen dioxide concentrations inside and outside the homes of participants in the European study "PEACE' (Pollution Effects on Asthmatic Children in Europe). The main aim of the study was to determine levels of nitrogen dioxide concentrations both outside and inside children's homes, and to estimate the indoor/outdoor ratios for nitrogen dioxide in an urban area, in comparison with a less urbanized control area. We conducted measurements in 23 homes in Ume?, a city of about 100,000 inhabitants in the northern part of Sweden, in addition to 20 homes in a less urbanized control area situated about 20 km from Ume?. Measurements were made on two different occasions in each home during the period January-March, 1994. The houses were not equipped with any gas appliances. The mean outdoor 24-h concentration in Ume? was 28 micrograms m-3 and the mean indoor concentration was 11 micrograms m-3. The mean indoor: outdoor ratio was 0.44 (s = 0.23). The highest outdoor value, measured in the city centre of Ume?, was 54 micrograms m-3. In the control area the mean ambient 24-h concentration was 12 micrograms m-3, approximately half as high as in the urban area, and the mean indoor concentration was 6 micrograms m-3. The mean indoor: outdoor ratio was 0.67 (s = 0.55). The correlation coefficient between indoor and outdoor concentrations was higher in the control area, r = 0.79 (p < 0.001), in comparison with the urban area, r = 0.43 (p < 0.01). It is concluded that the outdoor as well as the indoor concentrations of nitrogen dioxide were approximately twice as high in Ume? as in the control area. This could be explained by heavier traffic density in Ume?. The mean 24-h concentration outside homes in Ume? was, however, below the 24-h national standard level of 75 micrograms m-3. The higher correlation between indoor and outdoor concentrations, combined with higher indoor: outdoor ratio, in the control area is interpreted as a sign of a lower level of penetration of outdoor air into the houses in the urban area. This was not explained by differences in types of buildings between the two areas, but possibly by differences in air-exchange rates and in habits of ventilating rooms with open windows.     

Obtaining mode mixity for a bimaterial interface crack using the virtual crack closure technique

We review, unify and extend work pertaining to evaluating mode mixity of interfacial fracture utilizing the virtual crack closure technique (VCCT). From the VCCT, components of the strain energy release rate (SERR) are obtained using the forces and displacements near the crack tip corresponding to the opening and sliding contributions. Unfortunately, these components depend on the crack extension size, Δ, used in the VCCT. It follows that a mode mixity based upon these components also will depend on the crack extension size. However, the components of the strain energy release rate can be used for determining the complex stress intensity factors (SIFs) and the associated mode mixity. In this study, we show that several—seemingly different—suggested methods presented in the literature used to obtain mode mixity based on the stress intensity factors are indeed identical. We also present an alternative, simpler quadratic equation to this end. Moreover, a Δ-independent strain energy release based mode mixity can be defined by introducing a “normalizing length parameter.” We show that when the reference length (used for the SIF-based mode mixity) and the normalizing length (used for Δ-independent SERR-based mode mixity) are equal, the two mode mixities are only shifted by a phase angle, depending on the bimaterial parameter ε.     

An evaluation of methods for prioritizing software requirements

This article describes an evaluation of six different methods for prioritizing software requirements. Based on the quality requirements for a telephony system, the authors individually used all six methods on separate occasions to prioritize the requirements. The methods were then characterized according to a number of criteria from a user's perspective. We found the analytic hierarchy process to be the most promising method, although it may be problematic to scale-up. In an industrial follow-up study we used the analytic hierarchy process to further investigate its applicability. We found that the process is demanding but worth the effort because of its ability to provide reliable results, promote knowledge transfer and create consensus among project members.     

Improved practical support for large-scale requirements prioritising

An efficient, accurate and practical process for prioritising requirements is of great importance in commercial software developments. This article improves an existing cost-value approach in which stakeholders compare all unique pairs of candidate requirements according to their value and their cost of implementation. Techniques for reducing the required number of comparisons are suggested, thus making the process more efficient. An initial approach for managing requirements interdependencies is proposed. A support tool for the improved process has been developed to make the process more practical in commercial developments. The improved process and its support tool have been applied and evaluated in an industrial project at Ericsson Radio Systems AB. The results indicate a pressing need for mature processes for prioritising requirements, and the work presented here is an important step in that direction.     

Reasons for drop in shell-and-tube condenser performance when replacing R22 with zeotropic mixtures. Part 1. Analysis of experimental findings

An experimental and theoretical investigation was made to find out the reasons for the drop in shell-and-tube condenser performance when replacing R22 with a zeotropic mixture R407C. Measurements show that at lower condenser loads the reduction in performance can be as large as 70% compared to the full condenser load. Calculation results are compared with experimental results for two different condensers, one with micro-finned tubes and one with 3-D finned tubes. Calculations show that the degree of mixing of the newly formed condensate on a tube and the drained condensate is a factor influential enough to explain the performance drop. 3-D finned tubes seem to have better mixing in the condensate than integral finned tubes.