Development of a current detection type cable fault locator

A cable fault location instrument based on the detection of traveling wave currents was developed. It is different from the conventional pulse radar method based on voltage detection. Measurement is automated, and the distance to the fault point is displayed by merely pushing a switch. In a branched or crossbonded line, the fault point can be located without interference from the branched or the crossbonded point. Tests performed in both real and simulated lines confirmed the practical utility of this instrument     

Solving regularized least squares with qualitatively controlled adaptive cross‐approximated matrices

The adaptive cross‐approximation (ACA) technique is applied to accelerating an inverse‐problem solver that estimates charge distribution on a dielectric spacer. The ACA generates an approximated system‐matrix that enables us to carry out high‐speed inverse calculation. We designed an approximation procedure based on ACA with some additional concepts, that is, (a) partitioning of matrix based on algebraic information, (b) approximation quality control based on matrix norms, and so on. The tested solver (LSQR for regularized least squares) with ACA demonstrates about 10 times faster performance than that without ACA. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 159(3): 10–18, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20326     

Safety evaluation on the depressurization accident in the gas turbine high temperature reactor (GTHTR300)

Japan Atomic Energy Agency has been developing a gas turbine high temperature reactor (GTHTR300) with electric power of approximately 300 MW. One of the unique safety design concepts of this system is that events with frequency of occurrence of higher than 10⁻⁸/reactor-year are evaluated as design basis events in order to show that the frequency of large amount of FP release is less than 10⁻⁸/reactor-year. According to this concept, a depressurization accident by a large break of helium piping is postulated as a design basis event. This accident is one of the most serious accidents in the high-temperature gas-cooled reactors from the viewpoint of loss of coolability. The safety evaluation on the accident was conducted based on the actual design of the system. The short-term and long-term behaviors of fuel temperature after occurrence of the accident, internal pressure of the reactor building, oxidation behavior of fuels and graphite structures were evaluated and exposure dose of general public was also estimated using the results of evaluation of fuel temperature and fuel failure by oxidation. All of the evaluation results meet the safety criteria and feasibility of the GTHTR300 was shown by this study.     

Acute progressive polyneuropathy in a patient with Waldenstr?m macroglobulinemia

A case of Waldenstr?m's macroglobulinemia (WM) (IgM-kappa type) associated with acute-onset demyelinating peripheral neuropathy is reported. A 49-year-old woman was admitted to our hospital because of general fatigue and recurrent syncope attacks. She was treated with vincristine, cyclophosphamide, epirubicin and prednisolone. By 10th hospital day, her clinical condition improved and serum viscosity was reduced. However, on the 21st hospital day, she suffered from rapidly progressive writing and gait disturbance. Neurological examination showed muscular atrophy and weakness in the distal part of four extremities. Deep tendon reflexes were diminished. There was no sensory deficit. Cerebrospinal fluid was normal. Anti-myelin associated glycoprotein activity of her serum was negative. Both motor and sensory nerve conduction velocities were markedly decreased. Biopsy of sural nerve revealed marked demyelination and onion bulb formation. There was IgM deposition on myelin sheath. Minimal axonal changes excluded the possibility of vincristine neuropathy. Plasmapheresis improved her symptoms, but nerve conduction velocities remained unchanged. Polyneuropathy associated with WM is usually gradual onset and sensory dominant. In this case, associated neuropathy was acute onset, progressive and motor dominant. This type of neuropathy in patients with WM is very rare.     

Theory and characteristics of novel variable reluctance 1X resolver

Although brushless resolvers have been used widely as angular position transducers, they are expensive due to their intricate construction, involving a rotary transformer to supply the exciting coils wound on the rotor poles with the current. It is shown theoretically in this paper that the resolver without rotary transformer or brushes can be realized by simple construction, which consists of the stator core with both 4-poles exciting windings and 2-poles output ones and the rotor core carrying no windings. In this resolver the rotor core has minimum gap at one side and a maximum gap at another side of the diameter. It is characterized by an outer surface form that makes the fluctuation part of gap permeance very in proportion to cos θ, where θ represents the angular position of a point in the air gap with respect to the origin on the rotor, the point of minimum air gap. The method determining the rotor form to embody the aforementioned gap permeance variation is also shown. It has been confirmed not only by simulation but also experiment that the 2-phase output voltages of a model designed based on the theory have sinusoidal waveforms with very small harmonic contents. Moreover, the rotor position detected by processing the output voltages through the conventional resolver/digital converter was within acceptable engineering accuracy.     

A simplified cascade current‐source inverter interconnected to a single‐phase three‐wire distribution system and its application to electric energy storage systems with batteries

A novel current source inverter system interconnected to the single‐phase grid is proposed. It has the same construction as the conventional three‐phase current source inverter that is interconnected to the single‐phase three‐wire distribution system. Though the proposed circuit has no output transformer, it can be equivalently performed as the single‐phase double cascade inverter by diverting the pole transformer in the utility system. By controlling the appropriate scheme, the output currents can be obtained as the five‐level waveforms and their distortions can be decreased sufficiently. It is applied to the interactive electric energy storage system with batteries and the basic discharging characteristics are discussed experimentally. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(2): 50–61, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10380     

Oxyphilic cell variant of endometrioid adenocarcinoma

A case of oxyphilic cell variant of endometrioid adenocarcinoma is presented. To the best of our knowledge, there have been only three such cases reported in the English literature. The patient was a 35-year-old Japanese female (gravida 0, para 0). She was slightly obese with profuse vaginal bleeding. Histological examination of the resected uterus revealed endometrioid adenocarcinoma with an exclusive oxyphilic cell component. There was no evidence of myometrial invasion nor lymph node metastases. Reported cases of oxyphilic cell variant of endometrioid adenocarcinoma, including the present case, were stages 0-1 and grades 1-2. Although further study is necessary to evaluate this variant, oxyphilic cell variant seems to be an early stage of adenocarcinoma and should be differentiated from eosinophilic metaplasia and other types of adenocarcinoma of the endometrium.