Synthesis and application of fluorescein- and biotin-labeled molecular probes for the chemokine receptor CXCR4

The design, synthesis, and bioevaluation of fluorescence- and biotin-labeled CXCR4 antagonists are described. The modification of D-Lys8 at an epsilon-amino group in the peptide antagonist Ac-TZ14011 derived from polyphemusin II had no significant influence on the potent binding of the peptide to the CXCR4 receptor. The application of the labeled peptides in flow cytometry and confocal microscopy studies demonstrated the selectivity of their binding to the CXCR4 receptor, but not to CXCR7, which was recently reported to be another receptor for stromal cell-derived factor 1 (SDF-1)/CXCL12.     

Effect of Surface Treatment on the Selective Photocatalytic Oxidation of Benzyl Alcohol into Benzaldehyde by O2 on TiO2 Under Visible Light

The photocatalytic oxidation of benzyl alcohol into benzaldehyde proceeded with high conversion and selectivity on a TiO₂ photocatalyst by O₂ under visible light irradiation. Surface complex formed by the interaction of benzyl alcohol with the Ti sites and/or surface OH groups of TiO₂ play an important role in the absorption of visible light and unique selective photocatalytic reaction.     

Oxygen release behaviour of Ce(1−x)ZrxO2 powders and appearance of Ce(8−4y)Zr4yO(14−δ) solid solution in the ZrO2–CeO2–CeO1.5 system

To clarify the existence of metastable phases in the ZrO₂–CeO₂–CeO_1.5 system, evolved-oxygen gas analyses, (EGA), by heating a single phase of t′ and t″ (Ce_(1−x)Zr_xO₂) with various compositions, x, in a reducing gas and successive oxidation were carried out repeatedly. The oxygen release behaviour of the t′ and t″ phases was very complicated. The single κ phases, (Ce_(1−x)Zr_xO₂) with the composition, x=0.5 and 0.6, which were obtained by oxidizing the resulting pyrochlore as a precursor in O₂ gas at 873 K, exhibited a sharp oxygen release at the lowest temperature; the composition range of κ phase may be x=0.450.65. A new tetragonal phase t*, (Ce_(1−x)Zr_xO₂), which was attained by cyclic redox process together with annealing in O₂ gas at 1323 or 1423 K, exhibited a sharp oxygen release at the highest temperature; the composition range of t* phase may be as wide as x=0.200.65. A metastable solid solution expressed by a chemical formula of Ce_(8−4y)Zr_4yO_(14−δ) (y=01) possessing a CaF₂-related structure appeared on deoxidation of the t* phase. A ternary phase diagram containing the t* and Ce_(8−4y)Zr_4yO_(14−δ) solid solution was proposed.     

Synthesis of novel compounds with cation ordered fluorite and α-PbO2 related structures by oxidation of Sn2Nb2O7 pyrochlore

Sn(II)_1.2(Nb(V)_1.6Sn(IV)_0.4)O₆ pyrochlore precursor was oxidized at temperature of the range 573–973 K in 1% O₂/Ar and O₂ gases for various periods of time. Two kinds of novel metastable phases with a composition of Sn(IV)_0.6(Nb(V)_0.8Sn(IV)_0.2)O_3.6 could be synthesized. Further, the other novel metastable phase with the same composition was found as a phase contained. One of the metastable phases was the cubic κ-CeZrO₄ related-type possessing the fluorite-related structure, which was formed by the cation diffusionless insertion of the oxygen atom into original oxygen vacant site of the pyrochlore-type structure. Another was an orthorhombic α-PbO₂ related-type possessing a cation ordered arrangement unlike a well known NiWO₄ structure. The other was the rutile related-type possessing a cation ordered arrangement. Appearance of the two latter metastable phases could be attributed to the displacement of the oxygen stacking in the κ-CeZrO₄ related-type phase without cation redistributions. The appearance mechanisms were analogous to the well known transformations for AX₂ compounds among rutile-type, α-PbO₂-type, and fluorite-type phases under high pressure and its release. The dependence of the appearance of these novel metastable phases on oxygen partial pressure and temperature has been discussed in terms of the driving forces and energy barriers for reactions.     

Improvement of carrier diffusion length in silicon nanowire arrays using atomic layer deposition

To achieve a high-efficiency silicon nanowire (SiNW) solar cell, surface passivation technique is very important because a SiNW array has a large surface area. We successfully prepared by atomic layer deposition (ALD) high-quality aluminum oxide (Al₂O₃) film for passivation on the whole surface of the SiNW arrays. The minority carrier lifetime of the Al₂O₃-depositedSiNW arrays with bulk silicon substrate was improved to 27 μs at the optimum annealing condition. To remove the effect of bulk silicon, the effective diffusion length of minority carriers in the SiNW array was estimated by simple equations and a device simulator. As a result, it was revealed that the effective diffusion length in the SiNW arrays increased from 3.25 to 13.5 μm by depositing Al₂O₃ and post-annealing at 400°C. This improvement of the diffusion length is very important for application to solar cells, and Al₂O₃ deposited by ALD is a promising passivation material for a structure with high aspect ratio such as SiNW arrays.     

SYNTHESIS OF NANOSTRUCTURED LiM0.15Mn1.85O4 (M = Mn,Co, Al,AND Fe) PARTICLES BY SPRAY PYROLYSIS IN A FLUIDIZED BED REACTOR

A novel technique has been developed to directly produce fine ceramic powders from liquid solution via spray pyrolysis in a fluidized bed reactor (SPFBR). Using this technique the preparation of LiM_0.15Mn_1.85O₄ (M = Mn, Co, Al, and Fe), which are the most promising cathode materials for lithium-ion batteries, has been carried out at a superficial velocity U₀ of 0.71 m/s, a reactor temperature T of 800°C, and a static bed height L_s of 100 mm. The as-prepared powders were spherical nanostructured particles that comprised primary particles of a few tens of nanometers in size, and they exhibited a pure cubic spinel structure without any impurities in the XRD patterns. The chemical composition of as-prepared samples showed good agreement with the theoretical values that proved stoichiometric formulae of the compounds. The specific surface area of as-prepared LiM_0.15Mn_1.85O₄ (M = Mn, Co, Al, and Fe) powders decreases with increasing the static bed height in each doping metal, while the crystallite size increases with the static bed height. As a result, the as-prepared powders showed larger crystallite size and smaller specific surface area than those prepared by conventional spray pyrolysis.     

Surface Analysis of Cr2O3‐, CoO‐, and Al2O3‐Doped Iron–Phosphate Glasses at High Temperature

Surface structures of iron–phosphate glasses were examined using X‐ray photoelectron spectroscopy (XPS). Cr₂O₃, CoO, and Al₂O₃ were introduced to the glass by the replacement of a part of Fe₂O₃, and the simulated fission products are also added. The obtained glasses showed high chemical durabilities by MCC‐1 test. In situ high‐temperature and room‐temperature XPS measurements were conducted on the polished sample surfaces and also those after 1‐week chemical durability test. Unique trends were observed in XPS spectra on heating and after the chemical durability test, respectively. Nature of the glass surface of iron–phosphate glasses was explained from the point of view of surface energy, and the origin of high chemical durability and the effect of chromium ions were discussed based on the changes on surface composition and valence states of transition‐metal ions.     

Delamination growth mechanisms in woven glass fiber reinforced polymer composites under Mode II fatigue loading at cryogenic temperatures

The purpose of this research is to characterize the cryogenic delamination growth behavior in woven glass fiber reinforced polymer (GFRP) composite laminates subjected to Mode II fatigue loading. Mode II fatigue delamination tests were performed at room temperature, liquid nitrogen temperature (77 K) and liquid helium temperature (4 K) using the four-point bend end-notched flexure (4ENF) test method, and the delamination growth rate data for the woven GFRP laminates were obtained. The energy release rate range was determined by the finite element method. Microscopic examinations of the specimen sections and fracture surfaces were also carried out. The present results are discussed to obtain an understanding of the fatigue delamination growth mechanisms in the woven GFRP laminates under Mode II loading at cryogenic temperatures.     

Moving pick‐up‐type contactless power transfer systems and their efficiency using series and parallel resonant capacitors

The equivalent circuit, the efficiency, and the important characteristics of moving pick‐up type contactless power transfer systems are described. If the primary series capacitor and the secondary parallel capacitors are chosen correctly and the winding resistances are ignored, the equivalent circuit of the transformer with these capacitors becomes the same as an ideal transformer at the resonant frequency. This simple approximation helps to understand the phenomena occurring with load changes. Because the circuit analysis becomes simple, the approximate value of the power transfer efficiency can be derived. This paper describes the determination of the capacitor values, the derivation of the equivalent circuit and the efficiency, and test results. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 172(2): 47–54, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20970     

Suppression of creep cavitation in precipitation-hardened austenitic stainless steel to enhance creep rupture strength

Extensive creep cavitation in Ti, Nb and Cu containing precipitation hardened austenitic steels was found to limit the usefulness of deformation resistance to increase long-term creep rupture strength. The steels were microalloyed with boron and cerium that resulted in increase in creep rupture strength and ductility of the steels significantly. Grain boundary sliding and creep cavity nucleation and growth in the steels were suppressed greatly on microalloying. Auger spectroscopic analysis revealed the segregation of boron instead of sulfur on cavity surface and the absence of sulfur contamination of grain boundary upon the microalloying. Suppression of creep cavitation through the control of trace elements segregation along with the precipitation hardening increased the creep rupture strength of austenitic stainless steels.