Crack-Healing Behavior of Si3N4/SiC Ceramics under Cyclic Stress and Resultant Fatigue Strength at the Healing Temperature

Si₃N₄/SiC composite ceramics were sintered and subjected to three-point bending. A semi-elliptical surface crack of 100 μm surface length was made on each specimen. The crack-healing behavior under cyclic stress of 5 Hz, and resultant cyclic fatigue strengths at healing temperatures of 1100° and 1200°C, were systematically investigated. The main conclusions are as follows: (1) Si₃N₄/SiC composite ceramics have an excellent ability to heal a crack at 1100° and 1200°C. (2) This sample could heal a crack even under cyclic stress at a frequency of 5 Hz. (3) The crack-healed sample exhibited quite high cyclic fatigue strength at each crack-healing temperature, 1100° and 1200°C.     

Mechanical properties of silicon-doped diamond-like carbon films prepared by pulse-plasma chemical vapor deposition

Silicon-doped diamond-like carbon (Si-DLC) films were prepared by dc pulse-plasma chemical vapor deposition (CVD), using a mixture of acetylene (C₂H₂) and tetramethylsilane (TMS) as the material gas. The pulse voltage was varied from − 2 to − 5 kV, and the TMS flow ratio (TMS/(C₂H₂ + TMS)) was varied from 0 to 40%. At a pulse voltage of − 2 kV, an increase in TMS flow ratio leads to a decrease in hardness. In contrast, at a pulse voltage of − 5 kV, an increase in TMS flow ratio leads to a slight increase in hardness. The high hydrogen concentration in the films due to an increase in TMS flow ratio promotes the formation of polymeric sp³ C―H bonds, resulting in the fabrication of soft films at a low pulse voltage of − 2 kV. However, an increase in the effect of ion peening on the growth face results in the formation of hard films at a high pulse voltage of − 5 kV. Then, at a pulse voltage of − 5 kV fabricating hard Si-DLC films, an increase in TMS flow ratio leads to an increase in the silicon content in the films, resulting in a decrease in the friction coefficient. Therefore, it is clarified that Si-DLC films fabricated by dc pulse-plasma CVD under a high pulse voltage and high TMS flow ratio exhibit high hardness and a low friction coefficient. Moreover, to investigate the friction coefficient of Si-DLC films fabricated by dc pulse-plasma CVD, films deposited by dc plasma CVD were also evaluated. To obtain the same low friction coefficient, dc pulse-plasma CVD requires less TMS than dc plasma CVD. Hence, it is also clarified that Si-DLC films can be fabricated at a low cost by dc pulse-plasma CVD.     

Synthesis of CeO2-ZrO2 solid solution by glycothermal method and its oxygen release capacity

The glycothermal (GT) reaction of Ce acetate and Zr alkoxide directly yielded CeO₂-ZrO₂ solid solutions in a region of low Ce content ≤40 mol%. Of the CeO₂-ZrO₂ solid solutions obtained by the GT method and subsequent calcination at 500 or 800 °C, the sample with 20 mol% Ce content had the largest BET surface area. This sample exhibited the highest Ce-based oxygen release capacity in the whole Ce/Zr composition range. The oxygen release capacities of CeO₂-ZrO₂ solid solutions synthesized by the GT method were much larger than those of the samples prepared by a coprecipitation (CP) method. The Reitveld analysis and the repetitive reduction-oxidation experiment indicated that the CeO₂-ZrO₂ solid solution synthesized by the GT method has a homogeneous structure as compared with that prepared by the CP method.     

Surface and pore structure of alumina derived from xerogel/aerogel

The alkyl derivatives of boehmite were prepared by solvothermal reaction of aluminum isopropoxide in n-alcohols (ethanol, 1-butanol, 1-hexanol, 1-octanol and 1-dodecanol) and the products were recovered as aerogel/xerogel by the removal of the solvent at the end of reaction. Aerogel or xerogel can be obtained simply by using only a reaction vessel (autoclave) and the obtained products were composed of plate-like particles having a well-developed boehmite structure. The alumina powders obtained by calcination of these products had relatively large pore-volumes ranging from 1.35 to 2.56 cm³/g. Transformation into α-Al₂O₃ was retarded even after calcination at 1200 °C. The effect of n-alcohols used in the solvothermal reaction on the phase, morphology and pore-texture of the alumina samples are discussed.     

Three-dimensional expression of adhesion molecules on the superficial synovial intima of LPS-induced arthritis of the mouse knee analyzed by immuno-SEM

Three-dimensional microlocalization of adhesion molecules, i.e. ICAM-1 (intercellular adhesion molecule), VCAM-1 (vascular adhesion molecule), LFA-1 (lymphocyte function-associated antigen), Mac-1 (macrophage differentiation antigen) and VLA-4 (very late activation antigen), expressed on type-A synoviocyte (macrophage-like cell) and type-B synoviocyte (fibroblast-like cell), were detected by immuno-scanning electron microscopy (SEM) to investigate the immunoreactive microenvironment of the superficial synovial intima in lipopolysaccharide (LPS)-induced arthritis of the mouse knee. Type-B synoviocytes extended rich slender processes from the periphery and constructed a cytoplasmic network, to which ICAM-1 was restricted. VCAM-1 was expressed only in the LPS-stimulated group and was relatively limited to the microvilli of type-B synoviocytes. Type-A synoviocytes were located randomly among the network with a smoother surface and expressed Mac-1 and LFA-1, which were counter-receptors for ICAM-1, and VLA-4 for VCAM-1 on the microvilli or lamellipodia. Three-dimensional microlocalization of adhesion molecules suggests that the network constructed by cytoplasmic processes and microvilli of type-B synoviocytes forms the pathway for the migration or the foothold for the fixation of type-A synoviocytes and takes part in forming an immunoreactive environment in the articular cavity.     

Magnetization measurement of 3He film adsorbed on sintered silver powder

The static magnetization of ³He film adsorbed on sintered silver powder has been measured for coverages from 0.10 to 0.54 atoms/»² in steps of 0.02 atoms/»² and at a coverage of 4.5 atoms/»². Below 0.20 atoms/»² the magnetization well obeys the Curie law, while above that coverage a ferromagnetic tendency appears. The coverage dependence of the magnetization greatly differs from that for graphite. At 0.23 atoms/»² the magnetization has apeak like that for graphite; however, the magnitude of the peak is not so large. Furthermore, a multipeak structure is found in the isotherm of the magnetization at 0.2 mK. It has two prominent peaks at 0.23 and 0.29 atoms/»², and two other peaks are found at 0.35 and 0.41 atoms/»². These appear periodically with an interval of 0.06 atoms/»², which is nearly equal to the coverage of one liquid layer.     

Stress intensity factor at a bilaterally-bent crack in the bending problem of thin plate

An infinite plate with an asymmetric bilaterally-bent crack is analyzed as a bending problem of a thin plate. Stress distributions and stress intensity factors are obtained for some angles and length of bent crack. These are obtained for the some Poisson's ratio. Influence of the initial crack width on the stress intensity factor are also investigated. Three loading conditions are taken into consideration: uniform out of plane bending at infinity in the $\text{x}$ and $\text{y}$ directions and uniform out of plane twist. The rational mapping function in the form of a sum of fractional expressions and the complex variable method are used for the analysis.