A Computational Study of Thrust Vectoring Control Using Dual Throat Nozzle

Dual throat nozzle （DTN） is fast becoming a popular technique for thrust vectoring. The DTN is designed with two throats, an upstream minimum and a downstream minimum at the nozzle exit, with a cavity in between the upstream throat and exit. In the present study, a computational work has been carried out to analyze the performance of a dual throat nozzle at various mass flow rates of secondary flow and nozzle pressure ratios （NPR）. Two-dimensional, steady, compressible Navier-Stokes equations were solved using a fully implicit finite volume scheme. The present computational results were validated with available experimental data. Based on the present results, the control effectiveness of thrust-vectoring is discussed in terms of the thrust coefficient and the coefficient of discharge.     

Highwall Stability due to Punch Mining at Opencut Coal Mines

Conventional highwall mining extracts coal with an auger machine or a continuous miner from exposed seams at the base of opencut or strip operations. However, under poor strata and high stress conditions, highwall mining cannot be conducted due to pillar and roof failures. In such cases, punch highwall mining is more effective than the conventional highwall mining. This paper describes conventional highwall mining and punch highwall mining systems and discusses the stability of the highwall due to punch highwall mining at opencut coal mines.     

Preliminary Study of Single Phase Preparation and Doping Effect of <Emphasis Type="Italic">β</Emphasis>-Zn<Subscript>4</Subscript>Sb<Subscript>3</Subscript>

Single phase β-Zn₄Sb₃ was prepared by the application of a two-stage heat treatment, and impurity elements were doped. The undoped and doped samples were prepared by direct melting followed by two-stage heat treatment at 450°C and 400°C after solidification of the samples in sealed quartz ampoules. Impurity doping of the samples was performed by the addition of 1 at.% of Se, In, Pb, Te, or Bi. The resulting samples were characterized by x-ray diffraction (XRD), differential thermal analysis (DTA), optical microscopy, and electron probe microanalysis, and their Seebeck coefficients were determined at room temperature. The undoped samples were determined by XRD and DTA to comprise single phase β-Zn₄Sb₃, while the doped samples were composed of multiple phases. From the measurements of the Seebeck coefficient, all samples were found to be p-type and all were found to have almost the same values. These results indicate that β-Zn₄Sb₃ has limited solubility for these impurity elements.     

Rapid evaluation of oxidation catalysis by gas sensor system: total oxidation, oxidative dehydrogenation, and selective oxidation over metal oxide catalysts

The rapid evaluation of catalysis is an indispensable technology for the success of combinatorial chemistry. A small-sized, less expensive, easily operating screening is desirable for parallel settings which dramatically shortens the evaluation time. Recent advances in gas sensors have enabled us to use them for the rapid evaluation of oxidation catalysis. Three typical catalytic oxidations over metal oxide catalysts were evaluated by gas sensor systems optimized for each catalytic system. The first one is the total oxidation of carbon monoxide in air. Five catalytic combustion-type gas sensors were used in a parallel reactor system to shorten the evaluation time. The second one is the oxidative dehydrogenation (ODH) of ethane over the mixed oxide of nickel and iron. The evaluation of the ODH catalysis was performed by a selective olefin sensor which determines the concentration of C₂H₄ in C₂H₆. The third one is the selective oxidation catalysis of propane over alkali modified Fe/SiO₂. The effluents including CO, CO₂, aldehydes and ketones in propane were analyzed by the CO, CO₂ and semiconductor-type gas sensors selective toward aldehydes and ketones. These evaluation results indicated that gas sensors have a good potential for the rapid evaluation of oxidation catalysts.     

Catalytic behavior of AMoOx (A = Ba, Sr) in oxidation of 2-propanol

Perovskite-type oxides, BaMoO₃ and SrMoO₃, were prepared by reduction of scheelite-type oxides, BaMoO₄ and SrMoO₄, in H₂ flow at 873 K and characterized by XRD, TG, SEM, TPR, NH₃-TPD, UV-vis DRS and BET measurement. The catalytic activity of these alkaline-earth molybdenum oxide catalysts was tested for oxidation of 2-propanol with gaseous oxygen under atmospheric pressure. Dehydration to propylene was mainly promoted over the scheelite-type with Mo⁶⁺, while oxidative dehydrogenation to acetone was mainly promoted over the perovskite-type with Mo⁴⁺, and selectivity to acetone was much higher over BaMoO₃ than over SrMoO₃. Both perovskite-type oxide catalysts underwent oxidation to some degree during the catalytic reaction, so that they also contained some Mo⁶⁺. We concluded that the high selectivity to acetone resulting from oxidative dehydrogenation during 2-propanol conversion is related to the constantly changing oxidation state of the catalyst, resulting in coexistence of Mo⁶⁺ octahedra and Mo⁴⁺ octahedra on the AMoO₃ oxides.     

Layered mixed-anion compounds: Epitaxial growth,active function exploration,and device application

Optoelectronic properties and device applications of layered mixed-anion compounds such as oxychalcogenide LaCuOCh (Ch = chalcogen) and oxypnictide LaT_MOPn (T_M = 3d transition metal, Pn = pnicogen) are reviewed. Several distinctive functions have been found in these materials based on our original material exploration concept. Fabrication of high-quality epitaxial films of LaCuOCh leads to clarifying the excellent electrical and optical properties such as high hole mobility of 8 cm²/(V s) and heavy hole doping at >10²¹ cm^?3 in LaCuOSe, and sharp and tunable-wavelength photoluminescence in the solid–solution systems in LaCuOCh. In addition, a room temperature operation of a light-emitting diode is demonstrated using LaCuOSe as a light-emitting layer. These results suggest that the layered oxychalcogenides have potential for light-emitting layers as well as transparent hole-injection layers in organic/inorganic light-emitting diodes. Furthermore, by extending the material system from the copper-based oxychalcogenides to isostructural compounds, transition metal-based oxypnictides LaT_MOP (T_M = Fe, Ni), we have found novel superconductors, LaFeOP and LaNiOP.     

Loss factors of mirrors for a gravitational wave antenna

Low-loss mirrors fabricated by ion-beam-sputtering machines for possible application in an interferometric gravitational wave antenna were evaluated by use of Nd:YAG laser light (lambda = 1064 nm) with two distinct measurements: a tabletop experiment that used a short cavity with a small beam with a beam waist of approximately 2w(0) = 0.82 mm, and an optical test that used a 20-m prototypical gravitational-wave detector with a large beam with a beam waist of approximately 2w(0) = 4.4 mm. A multilayer coating comprised 29 layers of SiO(2)/Ta(2)O(5) and one protective coating of SiO(2). The best values obtained as a result of these measurements were 16 ppm (parts in 10(6)) and 30 ppm in total loss, respectively. Also, a two-dimensional loss map generated by use of a small beam successfully revealed the existence of a loss structure within the coating surface. These results imply that a high-reflectance multilayer coating has some inhomogeneities and a loss distribution with a typical scale of a few millimeters and that the total measured losses depend on the beam spot size.     

Active centers, catalytic behavior, symbiosis and redox properties of MoV(Nb,Ta)TeO ammoxidation catalysts

Selective as well as waste forming active centers were defined for MoVNbTeO and MoVTaTeO catalysts in the ammoxidation of propane to acrylonitrile and all catalytic functionalities were assigned to specific elements at the respective active centers. Symbiosis between M1 and M2 phases of these catalysts was observed, with phase cooperation being more extensive in the Nb than Ta containing compositions. The difference in catalytic effectiveness arises most likely because contact and surface area exposure of the two respective, cooperating phase pairs are not equal. The M1 phase of the catalysts is reducible by propane and ammonia in the absence of dioxygen and is regenerable to its original, fully oxidized state by dioxygen (air). No structural collapse is observed even after 120 C₃H₈ + NH₃ reduction pulses. The so induced reduction of the catalyst extends up to 70 layers deep. The product distribution over the first few pulses is very similar to that under catalytic conditions, supporting the concept that lattice oxygen is involved in the catalytic ammoxidation process. Therefore, the ammoxidation of paraffins is a redox process, as is of course the well-known olefin ammoxidation process.