Correlations of Hepatic Hemodynamics,Liver Function,and Fibrosis Markers in Nonalcoholic Fatty Liver Disease: Comparison with Chronic Hepatitis Related to Hepatitis C Virus

The progression of chronic liver disease differs by etiology. The aim of this study was to elucidate the difference in disease progression between chronic hepatitis C (CHC) and nonalcoholic fatty liver disease (NAFLD) by means of fibrosis markers, liver function, and hepatic tissue blood flow (TBF). Xenon computed tomography (Xe-CT) was performed in 139 patients with NAFLD and 152 patients with CHC (including liver cirrhosis (LC)). The cutoff values for fibrosis markers were compared between NAFLD and CHC, and correlations between hepatic TBF and liver function tests were examined at each fibrosis stage. The cutoff values for detection of the advanced fibrosis stage were lower in NAFLD than in CHC. Although portal venous TBF (PVTBF) correlated with liver function tests, PVTBF in initial LC caused by nonalcoholic steatohepatitis (NASH-LC) was significantly lower than that in hepatitis C virus (C-LC) (p = 0.014). Conversely, the liver function tests in NASH-LC were higher than those in C-LC (p < 0.05). It is important to recognize the difference between NAFLD and CHC. We concluded that changes in hepatic blood flow occurred during the earliest stage of hepatic fibrosis in patients with NAFLD; therefore, patients with NAFLD need to be followed carefully.     

Applicability of the generalized scaling law to a pile-inclined ground system subject to liquefaction-induced lateral spreading

The generalized scaling law is based on the concept of two-stage scaling and allows currently available centrifuge facilities to model a large-scale prototype expanding over the spatial dimension ranging from 30 m or larger subject to earthquake motions. This paper presents the results of investigation on the applicability of the generalized scaling law to the fully nonlinear regime of soil-structure system with the induced strain level of 10% in the order of magnitude. The centrifuge model tests performed in this study under the modeling of models scheme consist of a pile model embedded in a inclined ground subject to liquefaction-induced lateral spreading. Four different centrifugal accelerations ranging from 13g to 50g are used whereas the actual size of the physical model is kept constant with an overall scaling factor of 1/100. The models are exposed to tapered sinusoidal input accelerations of frequency 0.59 Hz and amplitude 3.0 m/s² in prototype scale, and the results are compared in terms of prototype by applying the generalized scaling law. As for the response of the ground during shaking, essentially identical accelerations and excess pore water pressures are recorded for all cases, while the lateral displacement shows a variation ranging from 5% to 9% in terms of shear strain due to a slight variation in experimental conditions (e.g., input peak acceleration, achieved density distribution). Practically the same responses are measured among the cases in the dissipation phase of excess pore water pressure. With regard to pile behavior, nearly identical responses for the lateral displacements and bending moments are obtained for all cases both during and after shaking. These results demonstrated that the generalized scaling law is applicable to the fully nonlinear regime of soil-structure system subject to the cumulative shear strain in the order of 10% due to cyclic mobility of sands during earthquakes.     

Melt crystallization of poly(ethylene terephthalate): Comparing addition of graphene vs. carbon nanotubes

Poly(ethylene terephthalate) (PET)-based nanocomposites with graphene or multi-wall carbon nanotubes (MWCNT) were prepared by melt mixing. Aspect ratio, A_f, and interparticle distance, λ, of graphene in the nanocomposites were obtained from melt rheology and transmission electron microscopy respectively. λ of PET/graphene nanocomposites was much smaller than λ in PET/MWCNT. For PET/graphene with highest A_f, λ became <1 μm at more than 0.5 wt% graphene. Non-isothermal crystallization behavior from the melt was investigated by differential scanning calorimetry. The crystallization temperatures suggest that the nucleation effect of graphene was stronger than that of MWCNT. The half crystallization time of PET/graphene became longer than PET/MWCNT with increasing graphene loading, suggesting that confinement by graphene suppressed the crystal growth rate. XRD analysis indicated that smaller crystals formed in PET/graphene than in PET/MWCNT. From Raman spectroscopy, the π–π interaction between PET and graphene was stronger than that between PET and MWCNT. This stronger interaction in PET/graphene appears to result in formation of crystals with higher perfection.     

Moving pick‐up‐type contactless power transfer systems and their efficiency using series and parallel resonant capacitors

The equivalent circuit, the efficiency, and the important characteristics of moving pick‐up type contactless power transfer systems are described. If the primary series capacitor and the secondary parallel capacitors are chosen correctly and the winding resistances are ignored, the equivalent circuit of the transformer with these capacitors becomes the same as an ideal transformer at the resonant frequency. This simple approximation helps to understand the phenomena occurring with load changes. Because the circuit analysis becomes simple, the approximate value of the power transfer efficiency can be derived. This paper describes the determination of the capacitor values, the derivation of the equivalent circuit and the efficiency, and test results. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 172(2): 47–54, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20970     

Thermal decomposition of cellulose/synthetic polymer blends containing grafted products. V. Cellulose/polystyrene blends

Homogeneous grafting of styrene onto cellulose was carried out in a dimethylacetamide/lithium chloride solvent system. The grafted products were added to cellulose/polystyrene (PS) blends as compatibilizers. The thermal decomposition behavior of the blends was investigated by thermogravimetry. The thermal stability of the blends decreased with an increase in grafted product content. The crystallinity of the blends decreased with grafted product content. The microphase‐separated structures of the blends became finer with grafted product content. The glass transition temperatures for cellulose and PS in the blends were lowered with grafted product content. Differences in thermal decomposition behavior of the blends were correlated with compatibility. Thermogravimetry was effective for compatibility estimation in cellulose/PS blends containing grafted products. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Numerical simulation of critical current performance in Nb3Sn strand subjected to periodic bending deformation

In the ITER Engineering Design Activity (EDA), four NB₃Sn model coils were developed and successfully tested. However, it was revealed that the critical current of the conductor degraded with the increase of electromagnetic force. One of the explanations of this phenomenon is a strand bending caused by enormous electromagnetic force. The authors therefore developed a simulation code using the distributed circuit model to investigate dependency of the critical current performance on the periodic bending deformation. The simulation results were in good agreement with the experiments. The dependence of the critical current on the periodic transverse load, temperature, periodic load pitch, thickness of Ta barrier which prevents Cu stabilizer from being contaminated by Sn, twist pitch of the strand, and RRR of the bronze matrix was investigated using the developed code. The results showed that the critical current degraded less with decreasing the pitch of the transverse load and increasing the Ta barrier thickness. It suggests that the shorter cabling pitch and the larger bending stiffness prevent the critical current degradation. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 171(3): 7–15, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20923     

Influence of phosphate species on green rust I transformation and local structure and morphology of γ-FeOOH

To clarify the role of phosphate in the formation of corrosion products, the transformation of GRI(Cl⁻) with the addition of phosphate was characterized through XRD, TEM, and solution analysis. Electrochemical analysis showed that the transformation of GRI(Cl⁻) was delayed and the size of the final products, i.e., γ-FeOOH was reduced in the phosphate added case. X-ray absorption spectroscopy indicated that the neighboring Fe–Fe coordination number of FeO₆ octahedral unit in γ-FeOOH was decreased. These effects of phosphate are attributed to its adsorption on GRI(Cl⁻) and nucleated γ-FeOOH that prevented particle growth during oxidation process.     

Photocatalytic hydrogenation of acetophenone derivatives and diaryl ketones on polycrystalline titanium dioxide

In the absence of molecular oxygen, various aromatic ketones such as acetophenone derivatives and diaryl ketones were photocatalytically hydrogenated on polycrystalline titanium dioxide (Degussa P25) under UV light irradiation (> 340 nm). The desired secondary alcohols were obtained with excellent chemical efficiency (almost 100% yields for 10 examples) by choosing ethanol as a sacrificial hole scavenger, which was oxidized into acetaldehyde.