Radiation pattern design of photonic crystal LED optimized by using multi-objective grey wolf optimizer

Photonic Network Communications - This paper proposes an effective method for shaping the radiation pattern intensity of photonic crystal (PhC) light-emitting diode (LED). In this method, the...     

Thermodynamic performance analysis of three solid oxide fuel cell and gas microturbine hybrid systems for application in auxiliary power units

In this study, three different configurations of a solid oxide fuel cell and gas microturbine hybrid system are evaluated for application in auxiliary power units. The first configuration is a common hybrid system in auxiliary power units, utilizing a fuel cell stack in the structure of the gas turbine cycle. The other configurations use two series and parallel fuel cell stacks in the structure of the gas turbine cycle. The main purpose of this research is thermodynamic analysis, evaluation of the performance of the proposed hybrid systems in similar conditions, and selection of an appropriate system in terms of efficiency, power generation, and entropy generation rate. In this study, the utilized fuel cells were subjected to electrochemical, thermodynamic, and thermal analyses and their working temperatures were calculated under various working conditions. Results indicate that the hybrid system with two series stacks had maximum power generation and efficiency compared with the other two cases. Moreover, the simple hybrid system and the system with two parallel stacks had relatively equal pure power generation and efficiency. According to the investigations, hybrid system with two series fuel cell stacks, which had 3424 and 1712 cells, respectively, can achieve the electrical efficiency of over 48%. A hybrid system with two parallel fuel cell stacks, in which each stack had 2568 cells, had the electrical efficiency of 46.3%. Findings suggested that maximum electrical efficiency occurred between the pressure ratios of 5–6 in the proposed hybrid systems.     

Diffuse reflectance behavior of the printed cotton/nylon blend fabrics treated with zirconium and cerium dioxide and citric acid in near- and short-wave IR radiation spectral ranges

Near- and short-wave IR emission spectra of printed cotton/nylon blend fabrics coated with inorganic compounds in order to tune their diffuse reflectance behavior to the ones with woodland and desert backgrounds are investigated. In this regard, cotton/nylon blend fabrics printed with a four-color digital pattern were used as the substrate, and different concentrations of zirconium and cerium dioxide (ZrO₂ and CeO₂) with and without citric acid as a cross-linker were loaded on these fabrics using the pad-dry-cure method. The diffuse reflectance of the coated fabrics with various concentrations of nanoparticles and a cross-linker was first measured by near-infrared (NIR) diffuse reflectance spectroscopy (DRS). Then, fabrics with an optimum concentration of nanoparticles and appropriate reflectivity profiles similar to woodland and desert were investigated by field emission scanning electron microscopy (FE-SEM), energy-dispersive spectroscopy (EDS), washing, and rubbing fastness properties. In general, NIR and short-wave infrared (SWIR) reflectance of fabrics coated with ZrO₂ and CeO₂ nanoparticles in range of 1% to 1.5% (w/v [%]) was suitable for matching with different environments. According to the findings obtained from the durability test, it was concluded that the washing fastness of the treated fabrics with CeO₂ nanoparticles was excellent in both environments. FE-SEM images of the treated fabrics containing ZrO₂ and CeO₂ indicated that the presence of nanoparticles on the surface of fabrics in woodland patterns was greater than the desert ones. However, the coated fabrics with CeO₂ and citric acid in the woodland pattern have shown better dispersion with a mean particle size of 30 to 60 nm.     

A note on multivariate non-normal process capability analysis using “mvtnorm” library in R

In this note we examine using Genzbretz and Miwa algorithms to improve estimation of proposition of non-conformance in multivariate normal distributions. This estimation is required in the procedure outlined in Abbasi and Niaki (Int J Adv Manuf Technol 50(5–8):823–830, 2010) to determine process capability index of multivariate non-normal processes.     

Simplified modeling and generalized predictive position control of an ultrasonic motor

Ultrasonic motors (USM's) possess heavy nonlinear and load dependent characteristics such as dead-zone and saturation reverse effects, which vary with driving conditions. In this paper, behavior of an ultrasonic motor is modeled using Hammerstein model structure and experimental measurements. Also, model predictive controllers are designed to obtain precise USM position control. Simulation results indicate improved performance of the motor for both set point tracking and disturbance rejection.     

Electrospun polyvinylidene pyrolidone/gelatin membrane impregnated with silver sulfadiazine as wound dressing for burn treatment

Nanofibrous membranes used for burn treatment have become widely popular due to their large surface area and high porous structure. In this study, electrospinning was used to fabricate a blended nanofibrous membrane of polyvinylidene pyrolidone (PVP) and gelatin, to use as wound dressing. The physical and mechanical properties of this novel membrane were investigated using SEM, FTIR and tensile tests. Results showed that poor mechanical properties of gelatin, which are preferred in medical applications for curing burns as they allow for antigen activity and skin repair, can be enhanced by adding PVP in the solution. Silver sulfadiazine (AgSD), an antibacterial agent, was also impregnated into the PVP/gelatin nanofibrous structure during electrospinning. The membrane thus fabricated showed antibacterial activities against both the Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus. AgSD release behaviour of fabricated samples indicated short-term drug delivery. It was concluded that the proposed drug-loaded membrane can be used as wound dressing, specifically, in treating skin burns.     

Investigating the flow structures in semi-cylindrical bubbling fluidized bed using pressure fluctuation signals

Hydrodynamic characteristics of a gas-solid semi-cylindrical fluidized bed was experimentally investigated and compared with that of a cylindrical bed by analysis of pressure fluctuations. Pressure fluctuations were analyzed in time and frequency domains using standard deviation, power spectral density function and discrete wavelet transform methods. Experiments were carried out in two semi-cylindrical and cylindrical fluidized beds of 14?cm in diameter each, operating in the bubbling fluidization regime at ambient pressure and temperature. Both beds were filled with glass beads of various sizes (120, 290 and 450?µm). The superficial gas velocity was varied in the range of 0.2–0.8?m/s. Results showed that although the minimum fluidization velocity is influenced by the particle size, it is not affected by the geometry of the bed. It was shown that the hydrodynamics of both beds are very similar and the difference is negligible. Number of large bubbles is slightly larger in the semi-cylindrical bed as compared with the cylindrical bed. Also, increase in the particle size and superficial gas velocity result in a greater difference between the number of large bubbles in both beds and the number of large bubbles in the semi-cylindrical bed increases slightly faster than in the cylindrical bed.     

A novel ternary half adder and multiplier based on carbon nanotube field effect transistors

A lot of research has been done on multiple-valued logic (MVL) such as ternary logic in these years. MVL reduces the number of necessary operations and also decreases the chip area that would be used. Carbon nanotube field effect transistors (CNTFETs) are considered a viable alternative for silicon transistors (MOSFETs). Combining carbon nanotube transistors and MVL can produce a unique design that is faster and more flexible. In this paper, we design a new half adder and a new multiplier by nanotechnology using a ternary logic, which decreases the power consumption and chip surface and raises the speed. The presented design is simulated using CNTFET of Stanford University and HSPICE software, and the results are compared with those of other studies.     

Migration analysis,antioxidant, and mechanical characterization of polypropylene-based active food packaging films loaded with BHA,BHT, and TBHQ

Polypropylene (PP) based active composite films were prepared by adding butylated hydroxy anisole (BHA), butylated hydroxytoluene (BHT), and tertiary butylated hydroquinone (TBHQ) antioxidants using the extrusion molding process. All concentrations of BHT, 2% to 3% BHA, and 3% TBHQ significantly increased the tensile strength (TS) of the composite films compared with control films. Increasing antioxidant concentration decreased TS values for BHT films, whereas an opposite trend was observed for BHA and TBHQ films. BHA at < 2%, BHT at > 2%, and TBHQ at all added concentrations significantly reduced elongation at break (E_b) of the composite films compared to control films. Water vapor permeability (WVP) of 1% BHT film was not significantly different from control. However, other antioxidants especially at increased concentrations significantly increased WVP values. TBHQ films with 300% to 662% increase had the highest WVP and BHT films with 5% to 81% increase had the lowest WVP among composite films. All three antioxidants had a negative effect on the transparency of the films; however the effect of BHA at higher concentrations was greater. The antioxidants did not change the color attributes of the films. Films containing all antioxidants showed 2,2-diphenyl-1-picrylhydrazyl radical-scavenging activity, which increased with increase in their concentration, especially for those containing 3 wt.% BHT and TBHQ. Overall, incorporating BHA and BHT into a PP matrix improved mechanical, barrier, antioxidant properties, and film appearance and consequently were proposed for the development of antioxidant active PP films. TBHQ film is not recommended for food packaging because of its weak mechanical properties (lower E_b and TS values, higher WVP, and greater migration).