Investigation on the resistance spot-welded austenitic/ferritic stainless steel

In this work, the effect of weld current on joining capability of austenitic stainless steel (AISI 304) and ferritic stainless steel (AISI 430) sheets with application of resistance spot welding process was investigated. Macrostructure, microstructure, microhardness, tensile shear strength, and failure mode of welded materials were evaluated for different weld currents. The values of weld current were 2.5, 3.75, and 5 kA. It was found that when the weld current increased, the nugget size and the weld strength were increased. Two distinct failure modes including interfacial and pullout were observed during tensile shear test. Finally, an adequate weld current was obtained.     

Identification of the Critical Characteristics of Different Types of Voltage Sags for Synchronous Machine Torque Oscillations

Abstract—This article investigates the effects of symmetrical and unsymmetrical voltage sags on an important characteristic of torque pulsation of synchronous machines. Voltage sags may cause high torque pulsations, which can damage the shaft or equipment connected to it. Duration, magnitude,and initial point-on-wave of the voltage sag are the major characteristics that can influence the synchronous motors torque transients. The effect of the characteristics on the severity of the transient torque is clarified parametrically, and the critical characteristics of each type of voltage sag are extracted. A theoretical analysis is first presented to determine the severest conditions. In this analysis, for each type of voltage sag, the stator flux trajectory in complex coordination is traced to monitor its variation during and after sag. By this method, the effects of different sag types can easily be compared during the sag and at the sag ending instant. To justify the theoretical analysis, simulations of a typical synchronous motor are carried out that confirm the theoretical analysis.     

Effectiveness of Zataria multiflora Boiss essential oil and grape seed extract impregnated chitosan film on ready-to-eat mortadella-type sausages during refrigerated storage

BACKGROUND: The effectiveness of chitosan films containing Zataria multiflora Boiss essential oil (ZEO) (5 and 10 g kg^?1) and grape seed extract (GSE) (10 g kg^?1) on lipid oxidation and microbial (lactic acid bacteria, aerobic mesophiles and inoculated Listeria monocytogenes) characteristics of mortadella sausage at 4 °C for 21 days was evaluated. The release of total phenolics (TPs) into sausage was also assessed. RESULTS: All films exhibited antibacterial activity against L. monocytogenes on agar culture media. Chitosan films containing ZEO were the most effective on the growth of bacteria. The growth of L. monocytogenes was significantly inhibited by ZEO‐GSE containing films especially during storage of the sausages for 6 days. Aerobic mesophiles and lactic acid bacteria were the most sensitive and resistant groups to films by 0.1–1.1 and 0.1–0.7 log cycles reduction, respectively. Sausages wrapped by 10 g kg^?1 GSE + 10 g kg^?1 ZEO films had the lowest degrees of lipid oxidation, which was 23% lower than the control. The TPs of ZEO films decreased to zero after 6 days, whereas TPs of GSE films followed a slight decrease during the storage. CONCLUSION: Antimicrobial/antioxidant chitosan film could be developed by incorporating GSE and ZEO for extending the shelf life of mortadella sausage. Copyright © 2011 Society of Chemical Industry     

Optimisation of probiotic yoghurt production enriched with phytosterols

To optimise the formulation of phytosterol‐enriched probiotic yoghurt, the effect of different concentrations of phytosterols, fat and the probiotic inoculation rate on the survival of Lactobacillus acidophilus LA‐5, Bifidobacterium lactis BB‐12 and physicochemical indices over 14 days of storage was explored. Data analysis showed that the phytosterol concentration and fat content were two crucial factors affecting probiotic viability. Addition of phytosterols had no adverse effect on the overall scores for sensory attributes. Regarding maximisation of viability and storage time, the optimum conditions were found to be fat = 8.07% (w/v), phytosterol = 18 g/L, probiotic inoculation rate = 71.42 mg/L and storage time = 12 days.     

Fabrication,characterization and evaluation of the effect of PLGA and PLGA–PEG biomaterials on the proliferation and neurogenesis potential of human neural SH-SY5Y cells

In recent years with regard to the development of nanotechnology and neural stem cell discovery, the combinatorial therapeutic strategies of neural progenitor cells and appropriate biomaterials have raised the hope for brain regeneration following neurological disorders. This study aimed to explore the proliferation and neurogenic effect of PLGA and PLGA–PEG nanofibers on human SH-SY5Y cells in in vitro condition. Nanofibers of PLGA and PLGA–PEG biomaterials were synthesized and fabricated using electrospinning method. Physicochemical features were examined using HNMR, FT-IR, and water contact angle assays. Ultrastructural morphology, the orientation of nanofibers, cell distribution and attachment were visualized by SEM imaging. Cell survival and proliferation rate were measured. Differentiation capacity was monitored by immunofluorescence staining of Map-2. HNMR, FT-IR assays confirmed the integration of PEG to PLGA backbone. Water contact angel assay showed increasing surface hydrophilicity in PLGA–PEG biomaterial compared to the PLGA substrate. SEM analysis revealed the reduction of PLGA–PEG nanofibers' diameter compared to the PLGA group. Cell attachment was observed in both groups while PLGA–PEG had a superior effect in the promotion of survival rate compared to other groups (p < .05). Compared to the PLGA group, PLGA–PEG increased the number of Ki67⁺ cells (p < .01). PLGA–PEG biomaterial induced neural maturation by increasing protein Map-2 compared to the PLGA scaffold in a three-dimensional culture system. According to our data, structural modification of PLGA with PEG could enhance orientated differentiation and the dynamic growth of neural cells.     

Concurrent impact of chipping and pitting damages in a locomotive power transmission system

Journal of Mechanical Science and Technology - The reliability of power transmission systems in locomotives directly impacts trains’ availability and running safety. The failure of gears,...     

Optimization of Output Power and Thermal Efficiency of Solar‐Dish Stirling Engine Using Finite Time Thermodynamic Analysis

This paper presents an investigation on finite time thermodynamic (FTT) evaluation of a solar‐dish Stirling heat engine. FTTs has been applied to determine the output power and the corresponding thermal efficiency, exergetic efficiency, and the rate of entropy generation of a solar Stirling system with a finite rate of heat transfer, regenerative heat loss, conductive thermal bridging loss, and finite regeneration process time. Further imperfect performance of the dish collector and convective/radiative heat transfer mechanisms in the hot end as well as the convective heat transfer in the heat sink of the engine are considered in the developed model. The output power of the engine is maximized while the highest temperature of the engine is considered as a design parameter. In addition, thermal efficiency, exergetic efficiency, and the rate of entropy generation corresponding to the optimum value of the output power is evaluated. Results imply that the optimized absorber temperature is some where between 850 K and 1000 K. Sensitivity of results against variations of the system parameters are studied in detail. The present analysis provides a good theoretical guidance for the designing of dish collectors and operating the Stirling heat engine system.     

Study of Unrecovered Strain and Critical Stresses in One-Way Shape Memory Nitinol

Unique thermomechanical properties of Nitinol known as shape memory and superelasticity make it applicable for different fields such as biomedical, structural, and aerospace engineering. These unique properties are due to the comparatively large recoverable strain, which is being produced in a martensitic phase transformation. However, under certain ranges of stresses and temperatures, Nitinol wires exhibit unrecovered strain. For cyclic applications, it is important to understand the strain behavior of Nitinol wires. In this study, the unrecovered strain of different Nitinol wire diameters was investigated using constant stress experiment. Uniaxial tensile test has been also performed to find the range of critical stresses. It was observed that the unrecovered strain produced in the first loading-unloading cycle affects the total strain in the subsequent cycles. Moreover, a critical range of stress was found beyond which the unrecovered strain was negligible while the wires heated up to the range of 70-80°C, depending on the wire diameters. The unrecovered strain of wire diameters of 0.19 mm and less was found to be sensitive to the critical stress. On the other hand, for wire diameters bigger than 0.19 mm this connection between the unrecovered strain and the critical stress was not observed for the same range of heating temperature.     

Ag2O-石墨混合物非等温分解的动力学分析

根据模型拟合Malek法、积分主曲线法和无模型的先进等转化率法,采用差示扫描量热仪系统研究了Ag2O-石墨混合物热分解的动力学。结果表明,热分解包含两个阶段,在第一阶段,Ag2O分解形成多孔银颗粒,该过程复杂,至少存在两种机制;在第二阶段,多孔粒子发生结构变化而形成大块银晶体,此过程为单步过程。