Resistive switching characteristics and conducting nanobits of polycrystalline NiO thin films

Thin films of NiO were deposited on Pt/Ta/glass sub-strates using a radio frequency (RF) sputtering method. The NiO thin films showed polycrystalline nature, indicating preferentially (111)-oriented structure. The resistive random access memory (RRAM) capacitor of a Pt/NiO/Pt structure exhibited unipolar switching characteristics and bistable resistivities for 200 repeated switching cycles. Furthermore, RRAM nanobits array was formed on the NiO thin films by applying a bias. The RRAM nanobits had a diameter of approximately 8 nm and were observed via a conducting atomic force microscope (CAFM). The density of the RRAM nanobits array was estimated to be approximately 0.64 Tbit/cm².     

Effect of anode iridium oxide content on the electrochemical performance and resistance to cell reversal potential of polymer electrolyte membrane fuel cells

An ideal polymer electrolyte membrane fuel cell (PEMFC) is one that continuously generates electricity as long as hydrogen and oxygen (or air) are supplied to its anode and cathode, respectively. However, internal and/or external conditions could bring about the degradation of its electrodes, which are composed of nanoparticle catalysts. Particularly, when the hydrogen supply to the anode is disrupted, a reverse voltage is generated. This phenomenon, which seriously degrades the anode catalyst, is referred to as cell reversal. To prevent its occurrence, iridium oxide (IrO₂) particles were added to the anode in the membrane-electrode assembly of the PEMFC single-cells. After 100 cell reversal cycles, the single-cell voltage profiles of the anode with Pt/C only and the anodes with Pt/C and various IrO₂ contents were obtained. Additionally, the cell reversal-induced degradation phenomenon was also confirmed electrochemically and physically, and the use of anodes with various IrO₂ contents was also discussed.     

An efficient microwave-assisted Suzuki reaction using Pd/MCM-41 and Pd/SBA-15 as catalysts in solvent-free condition

Palladium catalysts, Pd/MCM-41 and Pd/SBA-15 were prepared by impregnation of an aqueous solution of [Pd(NH₃)₄]Cl₂ on MCM-41 and SBA-15. Palladium contents of Pd/MCM-41 and Pd/SBA-15 are 8.4% and 8.7%, respectively. It has been shown that these catalysts are very suitable to microwave-assisted Suzuki reactions under solvent-free condition. It is also found that the base additives for this reaction are K₂CO₃, Cs₂CO₃ or CsF. Thus, phenylboronic acid and phenyl iodide with Pd/MCM-41 produce biphenyl by microwave irradiation for 10 min in 97.4% yield. Phenyl bromide, instead of phenyl iodide, also proceeds the reaction with phenylboronic acid using Pd/MCM-41 or Pd/SBA-15 yielding biphenyl by microwave irradiation for 10 min in excellent yield. Whereas the reaction of phenyl chloride with phenylboronic acid gives poor yield in same condition. Various aryl iodides and aryl bromides are tested. In this paper our recent results of microwave-assisted Suzuki reaction using Pd/MCM-41 and Pd/SBA-15 under solvent-free condition are described.     

Potential Chemical Markers for the Identification of Irradiated Sausages

Abstract: Hydrocarbons, gas compounds, and off‐odor volatiles were determined for irradiated (0 or 5 kGy) commercial sausages with different fat contents (16% and 29%) during a 60‐d storage period at 4 °C. Total of 4 hydrocarbons (C14:1, C15:0, C16:2, and C17:1) were detected only in irradiated sausages: the amount of C16:2 was the highest, followed by C17:1, C14:1, and C15:0. The concentrations of hydrocarbons decreased significantly (P < 0.05) with storage, but were still detectable at the end of 60‐d storage. Irradiated sausages produced significantly higher amounts of CO than the nonirradiated ones. CH₄ was detected only in irradiated sausages. Dimethyl disulfide was detected only in irradiated sausages and its concentration decreased significantly (P < 0.05) with storage. Fat content of sausages showed a significant effect on the production and retention of hydrocarbons, gas compounds, and sulfur volatiles in irradiated sausages during storage. Some hydrocarbons (C16:2, C17:1, C14:1, and C15:0), CH₄, and dimethyl disulfide were only found in irradiated sausages indicating that these compounds can be used as potential markers for irradiated sausages.     

Molecular brushes with extreme grafted side chain densities

A series of densely grafted poly(n-butyl acrylate) (PBA) molecular brushes with four different grafting densities were synthesized by the “grafting-from” approach using atom transfer radical polymerization (ATRP). A novel monomer, isopropylidene-2,2-Bis(methoxy)propionic hydroxyethylmethacrylate (IMPHMA), was synthesized and copolymerized with methyl methacrylate (MMA) under different monomer feed ratios to yield a series of linear poly(methyl methacrylate-stat-IMAPA), [PMMA-s-(PIMPHMA)]. The resulting copolymers were deprotected and transformed to macroinitiators, [PMMA-s-(PHEMA-IMPHMA-Br)]. n-Butyl acrylate (BA) was grafted from these macroinitiators to yield a series of molecular brushes, [PMMA-s-{(PIMPHMA)-g-PBA}], with various side chain lengths. Molecular brushes were characterized by gel permeation chromatography (GPC) and ¹H NMR. PBA side chains were cleaved by acid hydrolysis, and the resulting linear PBA polymers were characterized by GPC to study initiation efficiency during the synthesis of molecular brushes. The initiation efficiency increased with polymerization time and decreased with macroinitiators that had more initiation sites. Atomic force microscopy (AFM) measurements demonstrated the characteristic molecular structure by resolving individual brush molecules.     

Anti-diabetic effects of mulberry (Morus alba L.) branches and oxyresveratrol in streptozotocin-induced diabetic mice

Food Science and Biotechnology - Despite with accumulating evidences on the anti-diabetic effects of mulberry branch (MB), the major active component for the activity has not been known. Oral...     

Numerical verification of the continuous calculation method for tip stress during the driving process of the dynamic penetration test

This paper presents a calculation method for obtaining the continuous variation in stress between the tip and the soil during dynamic penetration tests, particularly in the case of using the Panda 3® penetration testing device. The originality of the method is that the tip stress can be computed continuously throughout the driving process. For each impact of the hammer on the penetrometer, data are recorded by sensors located at the top of the apparatus. Then, the stress at the tip and the displacement of the apparatus are calculated with a method based on the propagation of waves in the device. A three-dimensional numerical model of the penetration test, based on the Panda 3® specifications and using the discrete element method (DEM), is proposed in this paper. The purpose of the simulations is to validate the calculation method by comparing the curves of the tip stress versus the penetration distance obtained in two different ways, the first being the distance directly observed at the tip and the second being the distance calculated from the data recorded at the top of the penetrometer, as with the experimental device. The entire apparatus is represented, including the hammer, the rod, and the tip, and is driven into the model soil. The calculation method is applied, and the results are compared to the actual response of the soil to the driving of the penetrometer directly at the tip, which can be obtained with the numerical model. The responses are found to be very similar, confirming the theoretical framework and its underlying assumptions. This method is applied to dynamic penetration tests and provides the opportunity to obtain mechanical parameters other than the tip resistance from the tests.     

Numerical simulation of gas-assisted polymer-melt electrospinning: Parametric study of a multinozzle system for mass production

In this study, we developed a multiphysics model for simulation of a gas-assisted melt-electrospinning (GAME) process, focusing on jet formation and propagation behavior. By numerically calculating the stresses acting on the jet during a single-nozzle GAME process, the shear viscous stress was identified as the main factor with respect to jet stretch; thus, the relationship between shear viscous stress and jet thickness was investigated. The jet stretch ratio increased sharply when shear viscous stress reached the level at which jet sharpening occurred, leading to stable jet formation. We defined this stress as the critical shear viscous stress to determine stable spinnability. By imposing an electric field distribution calculated for a multi-nozzle array (number of nozzles, tip-to-tip distance, and applied voltage) on the boundary condition of the single-nozzle GAME simulation model, multinozzle GAME was simulated; this enabled proposal of a spinnability diagram for stable spinning.     

Gestational Exposure to Bisphenol A Affects Testicular Morphology,Germ Cell Associations,and Functions of Spermatogonial Stem Cells in Male Offspring

Exposure to bisphenol A (BPA) in the gestational period damages the reproductive health of offspring; detailed evidence regarding BPA-induced damage in testicular germ cells of offspring is still limited. In this study, pregnant mice (F0) were gavaged with three BPA doses (50 μg, 5 mg, and 50 mg/kg body weight (bw)/day; tolerable daily intake (TDI), no-observed-adverse-effect-level (NOAEL), and lowest-observed-adverse-effect level (LOAEL), respectively) on embryonic days 7 to 14, followed by investigation of the transgenerational effects of such exposure in male offspring. We observed that the NOAEL- and LOAEL-exposed F1 offspring had abnormalities in anogenital distance, nipple retention, and pubertal onset (days), together with differences in seminiferous epithelial stages and testis morphology. These effects were eradicated in the next F2 and F3 generations. Moreover, there was an alteration in the ratio of germ cell population and the apoptosis rate in germ cells increased in F1 offspring at the LOAEL dose. However, the total number of spermatogonia remained unchanged. Finally, a reduction in the stemness properties of spermatogonial stem cells in F1 offspring was observed upon LOAEL exposure. Therefore, we provide evidence of BPA-induced disruption of physiology and functions in male germ cells during the gestational period. This may lead to several reproductive health issues and infertility in offspring.