Analysis and design of synchronous permanent-magnet planar motors

The force equation of a synchronous permanent-magnet planar motor (SPMPM) was investigated. The flux density distribution of a two-dimensional (2-D) magnet array for a SPMPM was obtained by solving the equations of the scalar magnetic potential. The expressions of the force and back-EMF constant were derived and examined. Using these expressions, the conditions for normal operation of the SPMPM were found and the optimal design was determined in order to maximize the force of the SPMPM.     

Buckling analysis for delaminated composites using plate bending elements based on higher‐order zig‐zag theory

A finite element based on the efficient higher‐order zig‐zag theory with multiple delaminations is developed. The bending part of the formulation is constructed from the concept of DKQ element. Unlike conventional elements, a developed element has its reference in the bottom surface which simplifies zig‐zag terms on formulation. Exact patch solutions are developed on elements which have the bottom reference system. The present element passes proper bending patch tests in the arbitrary mesh configurations in isotropic materials. Zig‐zag formulation is adopted to model laminated plates with multiple delaminations. To assess the accuracy and efficiency of the present element based on higher‐order zig‐zag theory with multiple delaminations, the linear buckling problem of laminated plates with multiple delaminations has been analysed. The results have been compared with three‐dimensional elasticity solutions. The present element works as an efficient tool for analysing the behaviour of the laminated composites with multiple delaminations. Copyright © 2002 John Wiley & Sons, Ltd.     

Low-power high-slew-rate CMOS buffer amplifier for flat panel display drivers

A new high-slew-rate CMOS buffer amplifier consuming a very small quiescent current is proposed. This buffer amplifier recursively copies the output driving current and increases the tail current of the input differential pair during slewing. Since the proposed buffer has a possible slew rate higher than 10 V//spl mu/s for a load capacitance of 1 nF almost independently of static currents as low as 1 /spl mu/A, this buffer amplifier is promising for column driver ICs of flat panel displays that require low static power consumption, high current driving capabilities, and small silicon areas.     

The law of mixtures applied to the plastic deformation of two- phase alloys of coarse microstructures

The theory of the mechanical law of mixtures is reviewed and applied to the partition of stress and of strain in two-phase alloys. It is shown that the modified law of mixtures, based on averagein situ stress and strain, is valid for small deformations and is compatible with strengthening theories based on continuum and dislocation mechanics. The plastic deformation behavior of two representative two-phase alloys,i.e., a spheroidized high carbon steel and a duplex stainless steel, was studied by taking into account the mutual interactions between phases. The law of mixtures and dispersion strengthening theory were used to evaluate the strength contribution of each phase.     

Computational Implementation of Asymmetric Integral Imaging by Use of Two Crossed Lenticular Sheets

We propose an asymmetric integral imaging method to adjust the resolution and depth of a three‐dimensional image. Our method is obtained by use of two lenticular sheets with different pitches fabricated under the same F/#. The asymmetric integral imaging is the generalized version of integral imaging, including both conventional integral imaging and one‐dimensional integral imaging. We present experimental results to test and verify the performance of our method computationally.     

Experimental investigation of natural convection from a horizontal ice surface melting in pure water

A study on natural convection from a horizontal ice surface melting in pure water was conducted experimentally for the ambient water temperature from 2▿C to 10°C. Natural convection flow around upward-or downward-facing horizontal ice plate was divided into three regions according to the temperature variation of ambient water. The flow patterns of three regions were no flow, two-dimensional steady laminar flow and unsteady flow. Mean Nusselt number for the upward-facing surface had its maximum value at about 3°C of ambient water temperature. However, in the case of the downward-facing surface it increased as the ambient water temperature increased.     

Three-temperature modeling of carrier-phonon interactions in thin GaAs film structures irradiated by picosecond pulse lasers

This article investigates numerically the carrier-phonon interactions in thin gallium arsenide (GaAs) film structures irradiated by subpicosecond laser pulses to figure out the role of several recombination processes on the energy transport during laser pulses and to examine the effects of laser fluences and pulses on non-equilibrium energy transfer characteristics in thin film structures. The self-consistent hydrodynamic equations derived from the Boltzmann transport equations are established for carriers and two different types of phonons, i.e., acoustic phonons and longitudinal optical (LO) phonons. From the results, it is found that the two-peak structure of carrier temperatures depends mainly on the pulse durations, laser fluences, and nonradiative recombination processes, two different phonons are in nonequilibrium state within such lagging times, and this lagging effect can be neglected for longer pulses. Finally, at the initial stage of laser irradiation, SRH recombination rates increases sufficiently because the abrupt increase in carrier number density no longer permits Auger recombination to be activated. For thin GaAs film structures, it is thus seen that Auger recombination is negligible even at high temperature during laser irradiation.     

Feature selection techniques and comparative studies for large-scale manufacturing processes

In order to efficiently and effectively control an overall process in the process industry, a few important parameters should be identified from high-dimensional, non-linear, and correlated data. Feature selection techniques can be employed to extract a subset of process parameters relevant to product quality. The performance of these techniques depends on the precision of the prediction model formulated to quantify the relationship between the process parameters and the quality characteristics. Although the neural network-based partial least squares (NNPLS) method has been proven to be effective in prediction models for the aforementioned industrial process data, feature selection techniques appropriate for NNPLS models have yet to appear. Here, several techniques for scoring the relevance of process parameters to product quality are proposed and validated by applying three datasets. These experiments show that the proposed techniques can discriminate relevant process parameters from irrelevant ones.     

Master sintering curve concepts as applied to the sintering of molybdenum

Sintering experiments with various molybdenum powders are rationalized using a master sintering curve concept that collapses density, grain size, or other parameters onto a single curve. In this case, the integral work of sintering is developed and customized for different green densities. Construction of the master sintering curve is described to show how the curve can be normalized with respect to green density effects. Various grades of molybdenum for metal injection molding and die compaction are included in the analysis, processed over a range of heating cycles. Die-compacted samples of varying green densities are used to illustrate the efficacy of the new, normalized master sintering curve concept. Sintering cycle optimization is one possible outcome from this analysis.