Thermal energy storage properties of polyethylene glycol grafted styrenic copolymer as novel solid-solid phase change materials

Polymeric solid-solid phase change materials (S-SPCMs) are functional materials with phase transition-heat storing/releasing ability. With this respect, a series of polyethylene glycol (PEG) grafted styrenic copolymer were produced as novel S-SPCMs. PEGs with three different molecular weights were used for synthesis of isocyanate-terminated polymers (ITPs). To achieve cross-linking S-SPCMs, the ITPs were grafted with styrene-co-ally alcohol) (PSAA) at three different PSAA:PEG mole ratios. The produced polymers were characterized using Fourier transform infrared (FT-IR), proton nuclear magnetic resonance (¹H NMR), and X-ray diffraction (XRD) technique. The crystalline-amorphous phase transitions of the polymers were examined using polarized optical microscopy (POM). The FT-IR, NMR, and XRD results confirmed the expected chemical structures and crystallization performances of the polymers. Thermal energy storage (TES) properties of the S-SPCMs were determined by differential scanning calorimetry (DSC). The DSC results revealed that the polymers with grafting ratio of PSAA:PEG(1:1) had phase transition enthalpies between about 74 and 142 J/g and phase transition temperatures between about 26°C and 57°C. Thermogravimetric analysis (TGA) measurements demonstrated that the S-SPCMs were resistant to thermal decomposition until about 300°C. Thermal conductivities of the produced S-SPCMs were measured in a range of about 0.18 to 0.19 W/mK. Furthermore, TES properties of the S-SPCMs were slightly changed as their chemical structures were remained after 5000 thermal cycles. By overall evaluation of the findings, it can be foreseen that particularly PSAA-g-PEG(1:1) polymers can be considered as promising S-SPCMs for some TES practices such as air conditioning of buildings, thermoregulation of food packages, automobile components, electronic devices, and solar photovoltaic panels.     

The Fate of Enteric Bacteria in Relation to Suspended Particles in Sea Water

The investigation was carried out to determine the effect of suspended particles on the survival of selected enteric bacteria (i.e. Escherichia coli and enterococci) which are important indicators of faecal pollution in marine waters. Rates of bacterial removal under varying experimental conditions (i.e. particle concentration, sewage content, and degree of mixing) were determined. The combined effect of the factors concerned with the removal rate of bacteria was evaluated by statistical analyses carried out on the experimental data utilizing the 'complete factorial' experimental design, and a good correlation between bacteria and particles was obtained.     

Eudragit S (methyl methacrylate methacrylic acid copolymer)/fatty acid blends as form‐stable phase change material for latent heat thermal energy storage

By composing (Eudragit S) with fatty acids (stearic acid (SA), palmitic acid (PA), and myristic acid (MA)), form‐stable phase change materials (PCMs), which can retain the same shape in a solid state even when the temperature of the PCMs is over the melting points of the fatty acids, are prepared. The compatibility of fatty acids with the Eudragit S is proved by microscopic investigation and infrared (FTIR) spectroscopy. The melting and crystallization temperatures and the latent heats of melting and crystallization of the form‐stable PCMs are measured by Differential Scanning Calorimetry (DSC) method. The maximum mass percentage of all fatty acids in the form‐stable PCMs is found as 70%, and no leakage of fatty acid is observed at the temperature range of 50–70°C for several heating cycles. Thermal properties obtained from the DSC analysis indicate that the Eudragit S/fatty acid blends as form‐stable PCM have great potential for passive solar latent heat thermal energy storage (LHTES) applications in terms of their satisfactory thermal properties and utility advantage. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1402–1406, 2006     

Synthesis and performance evaluation of thin film PPy-PVDF multilayer electroactive polymer actuators

Bending-type microactuators less than 1 mm in length and comprising of two polypyrrole (PPy) layers separated by polyvinylidene fluoride (PVDF) membrane have previously been fabricated and was shown to operate both in air and aqueous media. The main limiting factor to increase the bending angle and to further miniaturise these actuators was the thickness of the commercially-available PVDF membrane used (～110 μm). In this study, we have synthesised a porous PVDF thin film with a thickness of 32 μm using a spin coating technique, and electrochemically deposited PPy layers on both sides of this thin film to make ultra thin film polymer actuators. The electromechanical and electrochemical properties are investigated and compared with those of the thicker actuator system using the commercially-available PVDF and under identical conditions. The thin film shows very promising performance compared to its thicker counterpart.     

Enhancement of actuation ability of ionic-type conducting polymer actuators using metal ion implantation

In this study, we present the results and implications of an experimental study into the effect of gold-ion implantation on the actuation performance of ionic-type conducting polymer actuators, represented here by cantilevered tri-layer polypyrrole (PPy) actuators. We implant gold ions beneath the outer surfaces of PPy-based conducting polymer layers of the actuators in order to increase the conductivity of these layers, and therefore improve the overall conductivity of the actuators. A Filtered Vacuum Cathode Arc (FVCA) ion source was used to implant gold particles into the conducting polymer layers. Electrode resistance and capacitance, surface resistance, current response, mechanical work output of the actuator samples were measured and/or calculated for the actuator samples with and without gold implantation in order to demonstrate the effect of the gold-implantation. The current passing through the conducting polymer electrodes during their ‘electrochemomechanical’ actuation was measured to determine the charging time constant of the actuators. The mechanical displacement output of the actuators was recorded. The results demonstrate that the conductivity of the actuators increases noticeably, which has a flow on effect on the current response (i.e., charge injected into the polymer layers) and the mechanical work output. While the gold implanted actuators had a higher mechanical stiffness therefore a smaller displacement output, their time constant is smaller, indicating a higher response speed. The gold-implanted actuators generated a 15% higher mechanical work output despite the adverse effects on the polymer of the vacuum processing needed for the ion implantation.     

All‐carbon hybrids for high performance supercapacitors

A hybrid nanostructure with partially reduced graphene oxide (rGO) and carbon nanofibers (CNFs) was fabricated and used as supercapacitor electrodes. A straightforward, environmentally friendly, and low‐cost microwave‐assisted reduction process was developed for the synthesis of rGO/CNF hybrid structures. The fabricated supercapacitor devices showed a specific capacitance of 95.3 F g^?1 and a superior long‐term cycling stability. A capacitance retention of more than 97% after 11 000 galvanostatic charge discharge cycles was obtained. These and other results reported in this paper indicate that high‐rate, all‐carbon, rGO/CNF hybrid nanostructures are highly promising supercapacitor electrode materials.     

Engineered catalyst layer design with graphene-carbon black hybrid supports for enhanced platinum utilization in PEM fuel cell

In this study, a new approach was applied to prepare platinum/reduced graphene oxide/carbon black (Pt/rGO/CB) hybrid electrocatalysts. Unlike literature firstly GO and CB in varying ratios are homogeneously mixed with a high shear mixer and then Pt was impregnated onto the hybrid support structure according to the polyol method. According to our approach CB was used as a spacer and intercalating agent in both Pt impregnation and electrode preparation to avoid restacking and increase the Pt utilization. Thus rGO/CB based hybrid support can ease the diffusion while it is promoting to the use of high electrical connectivity and surface area of graphene. The maximum power density of 645 mW cm^?2 with Pt utilization efficiency of 2.58 kW/gPt was achieved with the hybrid containing the smallest amount of CB. It seems that this small amount of CB effectively modifies the electrode structure. The enhanced fuel cell performance can be attributed to synergistic effects from graphene and CB providing better mass transport and Pt utilization in the catalyst layer.     

Platinum nanoparticles decorated carbon nanofiber hybrids as highly active electrocatalysts for polymer electrolyte membrane fuel cells

Increasing the efficiency of electrocatalyst is the key demand for the polymer electrolyte membrane fuel cells (PEMFC). To address the activity and performance challenges of commercial electrocatalyst, Pt/C, we introduce a new hybrid catalyst support for Pt nanoparticles. In this regard, combining or mixing specific type of carbon-based supports is a feasible strategy to increase catalyst utilization and performance. In the current study, Pt nanoparticles (NPs) were decorated on a new hybrid network, comprising of carbon nanofiber (CNF) and carbon black (CB), by means of a facile and efficient microwave (MW) assisted reduction method. All synthesized electrocatalysts were characterized to elucidate chemical and morphological structures. Then, the hybrid electrocatalysts were utilized as hydrogen oxidation reaction (HOR) and oxygen reduction reaction (ORR) electrocatalysts and their electrocatalytic activities were investigated by using cyclic voltammetry (CV) and linear sweep voltammetry (LSV), respectively. We found that the hybridization of CNF with CB substantially improved not only the electrocatalytic activity but also the fuel cell performance, which can be attributed to a consecutive conductive network, in which CB acts as a spacer, and synergistic effects between the CNF and CB. The hybrid electrocatalyst (Pt/CNF-CB with 50:50 wt%) showed a superior activity toward HOR and ORR while also offering exceptional fuel cell performance. That hybrid possessed the highest electrochemically active surface area (ECSA) compared with Pt/CNF and Pt/CB. In addition, the mass activity (at 0.80 V vs RHE) of the Pt/CNF-CB (50:50 wt%) is about 3.3 and 3.5 times higher than that of Pt/CNF and Pt/CB, respectively. Furthermore, that hybrid electrocatalyst exhibited enhanced fuel cell performance with 907 mW.cm⁻¹ maximum power density. This work demonstrated that the CNF-CB supported Pt nanoparticles as electrocatalysts are extremely promising for fuel cell reactions.