Studies on analysis of terpene resin in imported chewing gums

We have developed an analytical method for terpene resins in chewing gum. The fraction including terpene resins was prepared by means of hexane extraction and two silica gel column chromatography treatments (hexane and ethyl acetate) from chewing gum. The terpene resin fraction was analyzed with LC/MS and IR. The terpene resins are mixtures of polymeric pinene and/or limonene, which have a monomer molecular weight of 136. The MS spectrum of the terpene resin peak on the LC/MS total ion chromatogram showed protonated molecular ion (M + H)+ peaks at intervals of m/z 136, characteristic of a complex mixture of polyterpenes. IR spectroscopy is a suitable technique to identify the terpene resin type, ie., pinene or limonene. When the method was applied to imported chewing gum sold in Japan, terpene resins were clearly detected.     

Enhancement of nutraceutical properties of licorice callus cultures using sample pre-treatment strategy

Licorice is an herbal plant in the Leguminosae family, and its roots and rhizomes are used as sweeteners in food and confectionery products. Moreover, it has a distinct inflammatory activity. In the present study, a sample pre-treatment method to induce the deglycosylation of active metabolites in callus cultures of Glycyrrhiza inflata (GI) and Glycyrrhiza glabra (GG) was developed. The results of the method evaluation showed the biotransformation of ononin to formononetin, a rare flavonoid found in trace amounts in licorice. The magnitude of enhancement was 3- and 19-fold in the GI and GG samples, respectively. Moreover, the anti-inflammatory activity assay showed that the potency of the sample pre-treatment group was higher than that of the untreated group because it exerted an enhanced suppression of cyclo-oxygenase 2 (COX-2), interleukin-6 (IL-6) and inducible nitric oxide synthase (iNOS) gene expression. This is the first report on the anti-inflammatory activity of licorice callus, which has the potential to be utilised as a functional food for health promotion. These findings support the idea of using sample preparation to impart nutraceutical properties to plant products.     

研磨加工层对高碳铬轴承钢超长寿命疲劳行为的影响

为了阐明磨石研磨加工层对高碳铬轴承钢JIS SUJ2超长寿命疲劳行为的影响,分别使用经砂纸研磨和电解研磨的砂漏形试样,在室温空气环境下进行旋转弯曲疲劳试验.砂纸研磨试样被除去部分磨石研磨层,电解研磨试样被除去了全部的磨石研磨层.结果表明,两种试样的S-N曲线由位于短寿命区的表面破坏模式和位于长寿命区的内部破坏模式的两条组成,表面破坏模式的S-N曲线受表面粗糙度和表面压缩残余应力的影响.内部破坏模式的S-N曲线不受表面条件的影响,是材料固有的特性.砂纸研磨试样表面破坏模式的疲劳极限最高,是电解研磨试样1.11倍和磨石研磨的1.20倍.表面压缩残余应力对表面破坏模式疲劳极限的影响可以用修正Goodman图表示.还讨论裂纹的萌生和扩展条件,推定超长寿命的疲劳极限.     

Preparation of Matrix-Type Nickel Oxide/Samarium-Doped Ceria Composite Particles by Spray Pyrolysis

Matrix-type nickel oxide (NiO)/samarium-doped ceria (SDC) composite particles, in which NiO and SDC nano-particles were homogeneously dispersed, were synthesized by spray pyrolysis (SP) for an anode precursor of intermediate-temperature solid oxide fuel cells (IT-SOFCs). SP of an aqueous solution containing Ni, Ce, and Sm salts resulted in capsule-type composite particles that had NiO enveloped with SDC. The capsule-type composite particles actually prevent Ni aggregation between particles, but they cannot have a large contact area between nickel (Ni) and SDC. A matrix-type composite particle is expected to have a large contact area because the matrix-type composite is comprised of nanometer-sized Ni and SDC particles. An adequate addition of ethylene glycol successfully resulted in matrix-type NiO/SDC composite particles. The matrix-type composite particles also showed higher anode performance than the capsule-type composite particles in these experiments and they were effective as precursors of high-performance IT-SOFC anodes.     

Radiation-induced polymerization of ethylene in a pilot plant. I. Bulk process

Radiation-induced bulk polymerization of ethylene was carried out with use of a pilot plant with a 10 liter reactor at pressures of 225–400 kg/cm², temperatures of 30–95°C, ethylene feed rates of 5–28 kg/hr, and dose rate of 3.8 × 10⁵ rad/hr. Characteristics of the process are mild polymerization conditions and capability of producing medium density polyethylene in powder form. The spacetime yield and molecular weight of polymer were in the range of 3.5 to 13.1 g/liter hr and 2.2 × 10⁴ to 14 × 10⁴, respectively. The space-time yield increased with mean residence time and 2.4 powders of pressure, and decreased with temperature. Molecular weight changed similarly with the reaction conditions. These results were consistent with those of the bench plant experiment and the scale effect was small. Polymer deposit to the reactor wall limited a period of continuous operation of the plant. The amount of deposited polymer was increased with the square of reaction time. The rate of polymer deposit was proportional to polymer concentration and to the cube of pressure. The polymer deposit cannot be solved in the bulk process.     

Crystallization process and some properties of novel transparent machinable calcium-mica glass-ceramics

Bulk glass having a calcium-mica composition (Ca_0.5Mg₃AlSi₃O₁₀F₂) is homogeneous glass. The crystallization mechanism of the mica is surface crystallization and transparency is lost completely when crystallization occurs on the surface. In this study, by decreasing SiO₂ and increasing CaO and Al₂O₃ from the chemical composition of Ca_0.5Mg₃AlSi₃O₁₀F₂, and moreover by replacing a small amount of K₂O instead of CaO, the phase separation appears in the glasses. Because of this phase separation, the mica begins to be crystallized not only on the surface but also in the bulk at lower temperatures. Consequently, the novel transparent machinable mica glass-ceramic can be obtained by heating the glasses having the chemical composition of Ca_0.6Mg₃Al_1.2Si_2.8O₁₀F₂ and K_0.01Ca_0.595Mg₃Al_1.2Si_2.8O₁₀F₂. As a larger amount of calcium-mica is separated, the bending strength decreases and the fracture toughness increases. Furthermore, by replacing K⁺ ion instead of Ca²⁺ ion in the interlayer of calcium-mica, the interlayer bonding strength becomes high, resulting in the increase of the bending strength.     

Recovery of liquid fuel from hydrocarbon-rich microalgae by thermochemical liquefaction

Liquefaction of Botryococcus braunii, a colony-forming microalga, with high moisture content was performed with or without sodium carbonate as a catalyst for conversion into liquid fuel and recovery of hydrocarbons. A greater amount of oil than the content of hydrocarbons in B. braunii (50 wt% db) was obtained, in a yield of 57–64 wt% at 300 °C. The oil was equivalent in quality to petroleum oil. The recovery of hydrocarbons was a maximum (>95%) at 300 °C.     

Phthalocyanine molecular nanowires that were prepared using porous alumina as a template: Development in the sample preparation procedure to evaluate electronic properties

We have proposed the synthesis of organic molecular nanowires using porous alumina as a template. We also proposed the use of a magnetic field to control the molecular packing structure in the nanowires. In this paper, we developed the method to evaluate the electronic properties of the nanowire of a phthalocyanine derivative that was synthesized using porous alumina as a template. The developed method facilitates the study in the organic molecular nanowires that were synthesized using templates and helps their use in future electronic devices.