All forms of energy are equal,but some forms of energy are more equal than others

Clean Technologies and Environmental Policy -     

Augmenting the performance of acrylonitrile–butadiene–styrene plastics for low‐noise dynamic applications

The main objective of this study was to enhance the performance of acrylonitrile–butadiene–styrene (ABS) plastics for dynamic structural applications, including those of automobile relevance. First, ABS was modified by blending with maleic anhydride grafted styrene–ethylene–butadiene–styrene block copolymer (MA‐g‐SEBS) in various proportions. Squeaking noise characteristics were evaluated by measurement of the frictional behavior in an in‐house fabricated friction testing apparatus, and the results are explained on the basis of the change in surface energy upon modification. Detailed dynamic mechanical analyses (strain, frequency, and temperature sweep) revealed significant improvements in the damping characteristics of the modified ABS, especially that modified with 10 wt % MA‐g‐SEBS, without much sacrifice in its mechanical strength. The modulus values predicted with Kerner's model of the blends were well correlated with the morphological changes upon modification. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Design of solar thermal systems utilizing pressurized hot water storage for industrial applications

A large number of industrial processes demand thermal energy in the temperature range of 80–240 °C. In this temperature range, solar thermal systems have a great scope of application. However, the challenge lies in the integration of a periodic, dilute and variable solar input into a wide variety of industrial processes. Issues in the integration are selection of collectors, working fluid and sizing of components. Application specific configurations are required to be adopted and designed. Analysis presented in this paper lays an emphasis on the component sizing. The same is done by developing a design procedure for a specific configuration. The specific configuration consists of concentrating collectors, pressurized hot water storage and a load heat exchanger. The design procedure follows a methodology called design space approach. In the design space approach a mathematical model is built for generation of the design space. In the generation of the design space, design variables of concern are collector area, storage volume, solar fraction, storage mass flow rate and heat exchanger size. Design space comprises of constant solar fraction curves traced on a collector area versus storage volume diagram. Results of the design variables study demonstrate that a higher maximum storage mass flow rates and a larger heat exchanger size are desired while limiting storage temperature should be as low as possible. An economic optimization is carried out to design the overall system. In economic optimization, total annualized cost of the overall system has been minimized. The proposed methodology is demonstrated through an illustrative example. It has been shown that 23% reduction in the total system cost may be achieved as compared to the existing design. The proposed design tool offers flexibility to the designer in choosing a system configuration on the basis of desired performance and economy.     

Determination of design space and optimization of solar water heating systems

In this paper, a methodology is proposed to determine the design space for synthesis, analysis, and optimization of solar water heating systems. The proposed methodology incorporates different design constraints to identify all possible designs or a design space on a collector area vs. storage volume diagram. The design space is represented by tracing constant solar fraction lines on a collector area vs. storage volume diagram. It has been observed that there exists a minimum as well as a maximum storage volume for a given solar fraction and collector area. Similarly existence of a minimum and a maximum collector area is also observed for a fixed solar fraction and storage volume. For multi-objective optimization, a Pareto optimal region is also identified. Based on the identified design space, the solar water heating system is optimized by minimizing annual life cycle cost. Due to uncertainty in solar insolation, system parameters and cost data, global optimization may not be utilized to represent a meaningful design. To overcome this, a region of possible design configurations is also identified in this paper.     

Multicomponent bulk metal nitride (Nb1/3Ta1/3Ti1/3)N1−δ synthesis via reaction flash sintering and characterizations

In this research, near fully dense single phase bulk multicomponent transition metal nitride (Nb_1/3Ta_1/3Ti_1/3)N_1−δ has been successfully synthesized from mixed commercial powders of NbN, TaN and TiN via reaction flash sintering technique. This was performed with an applied pressure of ~ 35 MPa at 25°C under a constant DC electric field (~24-32 V/cm). The flash event, which is the abrupt increase in current (up to ~ 25.2 A/mm²) and temperature, occurred without preheating. The threshold power dissipation on the sample right before the flash is ~ 0.7 W/mm³. The formation of single phase (Nb_1/3Ta_1/3Ti_1/3)N_1−δ random solid solution and its compositional uniformity were confirmed by XRD and EDS, respectively. The effects of ball milling duration and limiting current density on phase formation were studied. Simulation based on Joule heating provides an estimate of the ultimate sample temperature of ~ 1850°C. Vickers hardness of the obtained (Nb_1/3Ta_1/3Ti_1/3)N_1−δ is 17.6 ± 0.6 GPa, which is comparable to similarly flash sintered ingredient binary nitrides of TaN and NbN. TGA in air shows that the oxidation resistance of (Nb_1/3Ta_1/3Ti_1/3)N_1−δ is better than that of TaN and NbN but inferior to TiN. The study demonstrates that reaction flash sintering can be a highly efficient technique for synthesizing bulk multicomponent ceramics for both material fundamental investigations and application development.     

Electrical Conduction in Nano-Structured La0.9Sr0.1Al0.85Co0.05Mg0.1O3 Perovskite Oxide

Nanocrystalline La_0.9Sr_0.1Al_0.85Co_0.05Mg_0.1O₃ oxide powder was synthesized by a citrate–nitrate auto-ignition process and characterized by thermal analysis, X-ray diffraction, and impedance spectroscopy measurements. Nanocrystalline (50–100 nm) powder with perovskite structure could be produced at 900°C by this process. The powder could be sintered to a density more than 96% of the theoretical density at 1550°C. Impedance measurements on the sintered samples unequivocally established the potential of this process in developing nanostructured lanthanum aluminate-based oxides. The sintered La_0.9Sr_0.1Al_0.85Co_0.05Mg_0.1O₃ sample exhibited a conductivity of 2.40 × 10⁻² S/cm in air at 1000°C compared with 4.9 × 10⁻³ S/cm exhibited by La_0.9Sr_0.1Al_0.85Mg_0.15O₃.     

Rheological, textural and spectral characteristics of sorbitol substituted mango jam

Full replacement of sucrose with sorbitol is feasible in mango jam manufacturing. Dynamic rheological tests characterized mango jam manufactured with sucrose/sorbitol as a weak gel. Mango jam did not follow Cox-Merz or modified Cox-Merz rule. The storage- and loss- moduli increased with sucrose concentration up to 60%, but decreased at higher sucrose concentrations. Gel strength decreased with increasing sorbitol concentration because of weaker junction zones in pectin gel network. FTIR spectra revealed that C-O and C-C stretching vibrations are indicators of the gel strength because pectin polymeric chain network formation in fruit jam is due to hydrogen bonding and hydrophobic interactions.     

Nanowire Assisted Mechanotyping of Cellular Metastatic Potential

Nanotechnology has provided tools for next generation biomedical devices which rely on nanostructure interfaces with living cells. In vitro biomimetic structures have enabled observation of cell response to various mechanical and chemical cues, and there is a growing interest in isolating and harnessing the specific cues that 3D microenvironments can provide without the requirement for such culture and the experimental drawbacks associated with it. Here, a randomly oriented gold coated Si nanowire substrate with patterned hydrophobic–hydrophilic areas for the differentiation of isogenic breast cancer cells of varying metastatic potential is reported. When considering synthetic surfaces for the study of cell-nanotopography interfaces, randomly oriented nanowires more closely resemble the isotropic architecture of a natural extracellular matrix. In the study reported here, the authors show that primary cancer cells preferably attach to the hydrophilic region of randomly oriented nanowire substrate while secondary cancer cells do not adhere. Using machine learning analysis of fluorescence images, cells are found to spread and elongate on the nanowire substrates as compared to a flat substrate, where they mostly remain round. Such platforms can not only be used for developing bioassays but also as stepping stones for tissue printing technologies where cells can be selectively patterned at desired locations.