Pulse height defect in pCVD and scCVD diamond based detectors

Polycrystalline (pCVD) and single crystal (scCVD) diamond films grown from Chemical Vapour Deposition (CVD), if sufficiently pure at Raman analysis, are very good materials for beam or flux monitors inside accelerators or nuclear reactors. This is because they are very hard to damage in high radiation fields and very resistant to high temperatures. Films of pCVD diamond are, however, not so good as spectroscopy detectors due to inhomogeneities induced by their growth in grains with the consequent presence of grain boundaries which worsen their energy resolution. The latter can be significantly improved by growing scCVD diamond films onto HPHT synthetic diamond substrates. We have shown that it is possible to measure the density of defects inside diamond specimens using as probes suitable penetrating nuclear radiations. With the preliminary results reported here we'll show that, bombarding CVD diamond films grown at Roma “Tor Vergata” with energetic protons and ⁴He, ⁶Li and ¹²C ions produced in the accelerators of Catania laboratories, the pulse height defects are higher than those in silicon detectors and likewise well described by a power law in the deposited energy. Furthermore, we'll show that pulse heights for the same particles seem to depend on the duration of the measurement, thus exhibiting a sort of depolarization of the insulator when exposed to the electric voltage which makes it a particle detector.     

Evaluation of the thermal and mechanical properties of poly(ε‐caprolactone), low‐density polyethylene,and their blends

The thermal and mechanical properties of low‐density polyethylene (LDPE), poly(ε‐caprolactone) (PCL), and their blends were evaluated. Differential scanning calorimetry showed that increasing the PCL content of the blend did not change the LDPE melting temperature, but reduced the crystallinity by up to 16.8%. This behavior was related to interactions between the PCL chains and the crystalline phase of LDPE. Tensile strength and elongation at break values for the blends were lower than those for the pure polymers, which suggested an incompatibility between the polymers. The values for Young's modulus under tensile increased when PCL was added to LDPE. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91:3909–3914, 2004     

Total content and dialyzable iron and zinc in foods from northern and Southern Mexico

Developing countries diets are based on a variety of plant foods that often are the main suppliers of important amounts of iron (Fe) and zinc (Zn). The objectives of this study were 1) to measure the total and dialyzable amounts of Fe and Zn in foods from Northern Mexico (Sonora) and from Southern Mexico (Oaxaca) and 2) to evaluate the effect of meat content of diets on the dialyzable amount of Fe and Zn. Methods to calculate the total dialyzable amount of Fe and Zn, were those of the AOAC and of Shen et al. Total Fe in e northern Mexican foods went from 0.78 +/- 0.0 to 11.59 +/- to 0.03 mg/ 100g (dry weight, DW); in southern Mexican foods the same micronutrient amounts were 0.86 +/- 0.18 to 8.8 +/- 0.57 mg/100 g (BS). Total Zn values were 0.91 +/- 0.00 to 13.58 +/- 0.05 mg/100 g (DW) in Sonora, and 0.64 +/- 0.18 to 20.80 +/- 0.33 mg/100 g (DW) in Oaxaca. In northern Mexico, foods dialyzable Fe had values from 0.1 +/- 0.04% to 10.6 +/- 0.36% and for Zn from 4.0 +/- 0.21% to 55.32 +/- 0.14%. Meanwhile, the range of values of dialyzable Fe for foods from Oaxaca were from 0.22 +/- 0.06% to 9.40 +/- 0.14% for and from 2.41 +/- 0.26% to 54.27 +/- 1.49% for dialyzable Zn. The average value for dialyzable Fe was higher in the foods that contained meat or meat products (p= 0.001).     

Catalysts based in cerium oxide for wet oxidation of acrylic acid in the prevention of environmental risks

Acrylic acid is a refractory compound for the non-catalytic wet oxidation (WO) process and can seriously damage the environment when released in industrial effluents. Oxidation of acrylic acid by catalytic wet oxidation (CWO) was studied in slurry conditions in a high-pressure batch reactor at 200 °C and 15 bar of oxygen partial pressure. Several solid cerium-based catalysts prepared in our laboratory were used (Ag/Ce, Co/Ce, Mn/Ce, CeO, MnO) and evaluated in terms of activity, selectivity and stability. Mn/Ce shows the higher activity in 2 h with 97.7% reduction of total organic carbon (TOC) followed by: MnO(95.5%)>Ag/Ce(85.0%)>Co/Ce(65.1%)>CeO(61.2%). Attempts were also carried out to analyze the influence of different Mn/Ce molar ratios. High percentages of Mn lead to practically total organic carbon concentration (TOC) abatements while low ratios lead to the formation of non-oxidizable compounds. Acrylic acid was readily degraded by all the catalysts pointing out the high importance of using a catalytic process. pH was an indicator of the reaction pathway and acetic acid was found as the major reaction intermediate compound; however it is completely oxidized after 2 h with exception for Co/Ce, CeO and MnO. Carbon adsorption and leaching of metals were poorly found for Mn/Ce indicating high stability. The catalyst microstructure after the reaction was analyzed and formation of whiskers of β-MnO₂ (or less probably MnOOH) were observed at the catalyst surface. Therefore, Mn/Ce revealed to be a promising catalyst for the treatment of effluents containing acrylic acid; nevertheless, its commercialization depends on further research.     

Effect of low‐temperature plasma and chitosan treatment on wool dyeing with Acid Red 27

This study examines in detail the influence of low‐temperature plasma and biopolymer chitosan treatments on wool dyeability. Wool knitted fabrics were treated and characterized by whiteness and shrink‐resistance measurements. Surface modification was assessed by contact‐angle measurements of human hair fibers, which were used as a model to study the wetting properties of the treated wool knitted fabrics. The dyeing behavior was assessed from the diffusion mechanism point of view. The dyeing kinetics were measured at two different pHs (4.2 and 6.5) and three different temperatures (60, 85, and 100°C) to gain information about the contribution of the surface modification treatment to the dyeing mechanism. The exhaustion and reflectance data were compared, and the apparent diffusion coefficients were calculated. On the basis of the obtained results, a model for the dyeing mechanism of the chitosan treated wool was proposed. When treated with chitosan, the polymer sheath spread on the surface of the fibers acted as a predominant dyeing site in very short dyeing times, thus interacting with the dye and in later stages imparting the dye to the wool fiber. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2204–2214, 2005     

Surface properties of fluorinated hybrid coatings

A commercial perfluoropolyether containing alkoxysilane functionalities was employed to prepare organic–inorganic hybrid coatings by using the sol‐gel process in the presence of tetraethoxysilane. Contact angle analysis revealed a strong hydrophobic and oleophobic character of the coatings almost independently from the molecular weight of the starting fluorinated oligomer. Surface tension values were in the range of 14–16 mN/m, suggesting a preferential segregation of fluorinated segments onto the surface of the coating. Atomic force microscopy showed the presence very smooth surfaces permitting to neglect the contribution of the surface roughness to wettability. Friction coefficient values were markedly lower with respect to the value of uncoated glass substrate. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1483–1488, 2006     

Manufacturing of polypropylene laminates and related structural reorganization in the crystalline phase

The conditions for obtaining recrystallization in more ordered modifications are described for an uniaxially oriented sample of isotactic polypropylene, annealed with fixed ends. These recrystallization conditions are related to the conditions of a lamination process.     

Biochemical,functional, and histochemical effects of essential fatty acid deficiency in rat kidney

The present study was designed to examine the effects of EFA deficiency (EFAD) on biochemical, functional, and structural aspects of the kidney in growing and adult rats fed a normal or EFAD diet for 9 wk after weaning. Food and fluid intake (FI), urine volume, and Na⁺ and K⁺ excretions were measured weekly from weeks 4 to 8 by placing the rats in individual metabolic cages for 24 h. At week 9, Li⁺ and a 5% water load, respectively, were administered at 14 and 1.5 h prior to glomerular and proximal tubular function studies, as assessed by 3-h creatinine (C_Cr) and Li⁺ (C_Li+) clearances. Hematocrit and urine volume; serum and urine [Cr], [Li⁺], [Na⁺], and [K⁺]; and renal FA distribution were also measured. Data [corrected to 100 g/body weight (bw) and presented as means ±SEM] were significant, at P<-0.05. Despite a similar ingestion of solids from weeks 4 to 7 (weeks 7 to 10 of life), the rats on the EFAD diet showed a decreased body weight from week 5. From weeks 4 to 8, Fl and urine volume were similar for both groups, but the Fl increased at week 6 in the EFAD group; 24-h Na⁺ and K⁺ excretions were similar at all weeks, except for an increase in the EFAD group for both ions at week 7. In the EFAD group, C_Cr and C_Li+ decreased by 27 and 56.3%, respectively (385.7±33.4 vs. 280±21.1, and 21.0±2.1 vs. 9.2±1.1 μL/min/100 g; n=9 vs. 10), the latter result suggesting increased proximal reabsorption. The 3-h Na⁺ and K⁺ excretions were similar, but the Li⁺ decreased (0.78±0.06×10⁻² vs. 0.32±0.03×10⁻² μeq/min/100 g) in the EFAD group, giving additional support to the suggestion. Renal structure was normal and similar for both groups, but the EFAD group showed a more prominent proximal tubule brush border, together with heavier periodic acid-Schiff staining in all specimens from weeks 5 to 9. In the EFAD group, FA of the n−9 and n−7 series were higher, but most of the n−6 series were lower as a percentage of total lipids in the medulla and cortex. Medullary levels of 20∶4n−6 were maintained, 22∶4n−6 declined twice, arachidonic acid was maintained, and 20∶5n−3 was lower. The EFAD diet affected glomerular function, proximal tubular structure and function, and FA distribution in the rat kidney.     

Model falsification using set‐valued observers for a class of discrete‐time dynamic systems: a coprime factorization approach

This article introduces a new method for model falsification using set‐valued observers, which can be applied to a class of discrete linear time‐invariant dynamic systems with time‐varying model uncertainties. In comparison with previous results, the main advantages of this approach are as follows: The computation of the convex hull of the set‐valued estimates of the state can be avoided under certain circumstances; to guarantee convergence of the set‐valued estimates of the state, the required number of previous steps is at most as large as the number of states of the nominal plant; and it provides a straightforward nonconservative method to falsify uncertain models of dynamic systems, including open‐loop unstable plants. The results obtained are illustrated in simulation, emphasizing the advantages and shortcomings of the suggested method. Copyright © 2013 John Wiley & Sons, Ltd.