Bond graph based control of a three-phase inverter with LC filter – Connection to passive and active loads

This paper proposes a model of a three phase electrical inverter with a LC output filter in delta connection used in a renewable energy supply system. The concept of inverse bond graph via bicausality is used for the control law design. The control law robustness is tested by connecting passive and active (induction machine) loads.     

EXAM: a comprehensive environment for the analysis of access control policies

Policy integration and inter-operation is often a crucial requirement when parties with different access control policies need to participate in collaborative applications and coalitions. Such requirement is even more difficult to address for dynamic large-scale collaborations, in which the number of access control policies to analyze and compare can be quite large. An important step in policy integration and inter-operation is to analyze the similarity of policies. Policy similarity can sometimes also be a pre-condition for establishing a collaboration, in that a party may enter a collaboration with another party only if the policies enforced by the other party match or are very close to its own policies. Existing approaches to the problem of analyzing and comparing access control policies are very limited, in that they only deal with some special cases. By recognizing that a suitable approach to the policy analysis and comparison requires combining different approaches, we propose in this paper a comprehensive environment—EXAM. The environment supports various types of analysis query, which we categorize in the paper. A key component of such environment, on which we focus in the paper, is the policy analyzer able to perform several types of analysis. Specifically, our policy analyzer combines the advantages of existing MTBDD-based and SAT-solver-based techniques. Our experimental results, also reported in the paper, demonstrate the efficiency of our analyzer.     

A hybrid particle swarm optimization approach for the sequential ordering problem

The sequential ordering problem is a version of the asymmetric travelling salesman problem where precedence constraints on vertices are imposed. A tour is feasible if these constraints are fulfilled, and the objective is to find a feasible solution with minimum cost.     

Incremental Linear Discriminant Analysis Using Sufficient Spanning Sets and Its Applications

This paper presents an incremental learning solution for Linear Discriminant Analysis (LDA) and its applications to object recognition problems. We apply the sufficient spanning set approximation in three steps i.e. update for the total scatter matrix, between-class scatter matrix and the projected data matrix, which leads an online solution which closely agrees with the batch solution in accuracy while significantly reducing the computational complexity. The algorithm yields an efficient solution to incremental LDA even when the number of classes as well as the set size is large. The incremental LDA method has been also shown useful for semi-supervised online learning. Label propagation is done by integrating the incremental LDA into an EM framework. The method has been demonstrated in the task of merging large datasets which were collected during MPEG standardization for face image retrieval, face authentication using the BANCA dataset, and object categorisation using the Caltech101 dataset.     

Behavioural study of median associative memory under true-colour image patterns

Median associative memories (MED-AMs) are a special type of associative memory that substitutes the maximum and minimum operators of a morphological associative memory with the median operator. This associative model has been applied to restore grey scale images and provided a better performance than morphological associative memories when the patterns are altered with mixed noise. Despite their power, MED-AMs have not been adopted in problems related with true-colour patterns. In this paper, we describe how MED-AMs can be applied to problems involving true-colour patterns. Furthermore, a complete study of the behaviour of this associative model in the restoration of true-colour images is performed using a benchmark of 16,000 images altered by different noise types.     

3D face computational photography using PCA spaces

In this paper, we present a 3D face photography system based on a facial expression training dataset, composed of both facial range images (3D geometry) and facial texture (2D photography). The proposed system allows one to obtain a 3D geometry representation of a given face provided as a 2D photography, which undergoes a series of transformations through the texture and geometry spaces estimated. In the training phase of the system, the facial landmarks are obtained by an active shape model (ASM) extracted from the 2D gray-level photography. Principal components analysis (PCA) is then used to represent the face dataset, thus defining an orthonormal basis of texture and another of geometry. In the reconstruction phase, an input is given by a face image to which the ASM is matched. The extracted facial landmarks and the face image are fed to the PCA basis transform, and a 3D version of the 2D input image is built. Experimental tests using a new dataset of 70 facial expressions belonging to ten subjects as training set show rapid reconstructed 3D faces which maintain spatial coherence similar to the human perception, thus corroborating the efficiency and the applicability of the proposed system.     

New simple and efficient heuristics for the uncapacitated single allocation hub location problem

Hub-and-spoke networks are widely studied in the area of location theory. They arise in several contexts, including passenger airlines, postal and parcel delivery, and computer and telecommunication networks. Hub location problems usually involve three simultaneous decisions to be made: the optimal number of hub nodes, their locations and the allocation of the non-hub nodes to the hubs. In the uncapacitated single allocation hub location problem (USAHLP) hub nodes have no capacity constraints and non-hub nodes must be assigned to only one hub. In this paper, we propose three variants of a simple and efficient multi-start tabu search heuristic as well as a two-stage integrated tabu search heuristic to solve this problem. With multi-start heuristics, several different initial solutions are constructed and then improved by tabu search, while in the two-stage integrated heuristic tabu search is applied to improve both the locational and allocational part of the problem. Computational experiments using typical benchmark problems (Civil Aeronautics Board (CAB) and Australian Post (AP) data sets) as well as new and modified instances show that our approaches consistently return the optimal or best-known results in very short CPU times, thus allowing the possibility of efficiently solving larger instances of the USAHLP than those found in the literature. We also report the integer optimal solutions for all 80 CAB data set instances and the 12 AP instances up to 100 nodes, as well as for the corresponding new generated AP instances with reduced fixed costs.     

An haptic-based immersive environment for shape analysis and modelling

Currently, the design of aesthetic products is a process that requires a set of activities where digital models and physical mockups play a key role. Typically, these are modified (and built) several times before reaching the desired design, increasing the development time and, consequently, the final product cost. In this paper, we present an innovative design environment for computer-aided design (CAD) surface analysis. Our system relies on a direct visuo-haptic display system, which enables users to visualize models using a stereoscopic view, and allows the evaluation of sectional curves using touch. Profile curves are rendered using an haptic device that deforms a plastic strip, thanks to a set of actuators, to reproduce the curvature of the shape co-located with the virtual model. By touching the strip, users are able to evaluate shape characteristics, such as curvature or discontinuities (rendered using sound), and to assess the surface quality. We believe that future computer-aided systems (CAS)/CAD systems based on our approach will contribute in improving the design process at industrial level. Moreover, these will allow companies to reduce the product development time by reducing the number of physical mockups necessary for the product design evaluation and by increasing the quality of the final product, allowing a wider exploration and comparative evaluation of alternatives in the given time.     

Global and robust formation-shape stabilization of relative sensing networks

This paper proposes a simple, distributed algorithm that achieves global stabilization of formations for relative sensing networks in arbitrary dimensions with fixed topology. Assuming the network runs an initialization procedure to equally orient all agent reference frames, convergence to the desired formation shape is guaranteed even in partially asynchronous settings. We characterize the algorithm robustness against several sources of errors: link failures, measurement errors, and frame initialization errors. The technical approach combines algebraic graph theory, multidimensional scaling, and distributed linear iterations.     

An 802.11e HCCA scheduler with an end-to-end quality aware territory method

In this paper we present a solution for the IEEE 802.11e HCCA (Hybrid coordination function Controlled Channel Access) mechanism which aims both at supporting strict real-time traffic requirements and, simultaneously, at handling TCP applications efficiently. Our proposal combines a packet scheduler and a dynamic resource allocation algorithm. The scheduling discipline is based on the Monolithic Shaper-Scheduler, which is a modification of a General Processor Sharing (GPS) related scheduler. It supports minimum-bandwidth and delay guarantees and, at the same time, it achieves the optimal latency of all the GPS-related schedulers. In addition, our innovative resource allocation procedure, called the territory method, aims at prioritizing real time services and at improving the performance of TCP applications. For this purpose, it splits the wireless channel capacity (in terms of transmission opportunities) into different territories for the different types of traffic, taking into account the end-to-end network dynamics. In order to give support to the desired applications, we consider the following traffic classes: conversational, streaming, interactive and best-effort. The so called territories shrink or expand depending on the current quality experienced by the corresponding traffic class. We evaluated the performance of our solution through extensive simulations in a heterogeneous wired-cum-wireless scenario under different traffic conditions. Additionally, we compare our proposal to other HCCA scheduling algorithms, the HCCA reference scheduler and Fair Hybrid Coordination Function (FHCF). The results show that the combination of the MSS and the territory method obtains higher system capacity for VoIP traffic (up to 32 users) in the simulated scenario, compared to FHCF and the HCCA reference scheduler (13 users). In addition, the MSS with the territory method also improves the throughput of TCP sources (one FTP application achieves between 6.1 Mbps without VoIP traffic and 2.1 Mbps with 20 VoIP users) compared to the reference scheduler (at most 388 kbps) and FHCF (with a maximum FTP throughput of 4.8 Mbps).