Design and development of guided four beam cantilever type MEMS based piezoelectric energy harvester

Microsystem Technologies - MEMS devices have found applicability in remote area of operation such as temperature monitoring in extreme climates, structural health monitoring, and car tire pressure...     

Gold nanorods mediated controlled release of doxorubicin: nano-needles for efficient drug delivery

Use of cysteamine hydrochloride (Cys-HCl) protected gold nanorods (GNRs) as efficient carrier of widely used anti-cancer drug doxorubicin using folic acid as navigational molecule is presented in this work. GNRs were found to have excellent drug loading capacity of >97 %. A detailed comprehension of in vitro drug release profile under ideal physiological condition was found to obey 1st order kinetics at pH 6.8, 5.3 and 7.2, an ideal milieu for drug delivery to solid tumours.     

Electric and dielectric study of cobalt substituted MgMn nanoferrites synthesized by solution combustion technique

Cobalt substituted Mg–Mn nanoferrites with formulae Mg_0.9Mn_0.1Co_xFe_2?xO₄, x=0.0, 0.1, 0.2 and 0.3, have been synthesized for the first time by the solution combustion technique. The effects of Co²⁺ ions on the dc resistivity, dielectric constant and dielectric loss tangent of Mg–Mn nanoferrites at room temperature are presented in this paper. X-ray diffraction confirmed the formation of a single phase spinel structure. Particle size was found to increase, 20.9–23.9 nm, with increasing Co²⁺ concentration. The dc resistivity was increased by two order of magnitude with substitution of Co²⁺ ions while the dielectric constant was found to be decreasing with the increasing concentration of cobalt ions. The value of dc resistivity obtained for Mg_0.9Mn_0.1Fe₂O₄ nanoferrite in our work is greater than the value obtained for the same composition prepared by the conventional ceramic technique. Further, the dielectric constant and dielectric loss tangent were observed to be decreasing with the increase in frequency.     

Study of Temperature Dependence of Electrode–Glass Ceramic Interface Using Impedance Spectroscopy

The electrical behavior of strontium titanate borosilicate glass ceramics (SrO.TiO₂- 2SiO₂.B₂O₃) with additives K₂O, La₂O₃, CoO and Nb₂O₅ was studied by using Impedance Spectroscopy as a function of temperature and composition. An equivalent circuit model having three parallel RC's connected in series with a capacitor C₄ could represent the data well. By comparing the complex modulus plots with simulated ones and looking at the values of the time constants these RC's were attributed to represent crystalline, glassy and glass-crystal interface regions of the glass- ceramic whereas C₄ represented the glass-ceramic sample and contact electrode interface. When the glass ceramic sample contained only SrTiO₃ crystalline phase and the remaining glassy matrix, the interface capacitance showed an Arrhenius type of nature with an activation energy (0.11 ± 0.04) eV and when the glass- ceramic sample contained number of crystalline phases no clear cut trend appeared. These findings are useful in selecting suitable electrodes for applications as well as in deciding upon experimental techniques for measurement of dielectric constants of materials.     

A Novel Highly Sensitive Humidity Sensor Based on ZnO/SBA‐15 Hybrid Nanocomposite

This work deals with the study of hydrothermally synthesized zinc oxide (ZnO) loaded mesoporous SBA‐15 hybrid nanocomposite for relative humidity sensing (RH) at room temperature. The sensor exhibits an excellent ~5 orders impedance change along with excellent linearity, quick response time (17 s), rapid recovery time (18 s), negligible hysteresis (1.2%), good repeatability, and stability (1.8%) in 11%–98% RH range. In addition, complex impedance spectra of the sensor at different RHs were analyzed to understand the humidity sensing mechanism. Our study can open a new way for realizing ZnO/SBA‐15 hybrid nanocomposite for fabrication of high‐performance RH sensors.     

Molecular Recognition of Parallel DNA Quadruplex d(TTAGGGT)4 by Mitoxantrone: Binding with 1:2 Stoichiometry Leading to Thermal Stabilization and Telomerase Inhibition

The interaction of the anthraquinone derivative mitoxantrone, a semisynthetic anti‐cancer drug with two non‐planar side chains, with heptamer G‐quadruplex d(TTAGGGT)₄, which contains the human telomere DNA sequence, was evaluated by differential scanning calorimetry, fluorescence Job plotting, absorption, and NMR and CD spectroscopy. Binding led to thermal stabilization of DNA (ΔT_m=13–20 °C). The spectra revealed that two mitoxantrone molecules bind externally at two sites of the DNA quadruplex as monomers, by partial insertion of the chromophore and side‐chain interaction at the grooves. The inhibition of telomerase (IC₅₀=2 μm), as determined by a TRAP assay, can be attributed to thermal stabilization of the DNA quadruplex because of the interactions with mitoxantrone. The studies revealed highly specific molecular recognition between a ligand and a parallel‐stranded G‐quadruplex; this might serve as a platform for the rational design of new drugs.     

Pressure Drop Studies on Flow of Viscoelastic Fluid Through a Packed Bed

In the present study, pressure drop-flow rate behavior for the flow of viscoelastic fluid through porous media has been investigated. Aqueous solutions of polyacrylamide (PAM) and water in the concentration range of 0.02 to 0.1% wt/vol were used to elucidate the effect of fluid elasticity on bed pressure drop. Based on the observed data, the existing pore model was extended to predict the bed pressure drop for viscoelastic fluid flowing through a porous media. A statistical comparison between the existing models and the present model was made. The proposed correlation based on modified pore model predicts the data well to within a reasonable accuracy of ±10% with arithmetic relative error (%ARE) and mean relative quadratic error (MRQE) of 8.3% and 0.122, respectively.     

Green biomass active electronic diode

For the first time, a biomass electronic junction functioning as a conventional electronic diode inside green leaves of Vinka-rosa and Plumeria rubra mass structure has been experimentally predicted and studied. The experimental diode demonstrated appropriate conventional electronic diode characteristics. The predicted diode junctions were operated for forward and reverse dc voltage biases in the range of ±1 to 10 and 1 to 30?V respectively. The studies revealed a strong functional dependence on the water content of the green leaf. These studies are sequential to the very recently reported research work of Kosta et al. on bioelectronics and soilelectronics. The study speculatively forecasts the beginning of a new revolutionary era of green biomass electronic circuitry.     

Size dependence of martensite transformation temperature in nanostructured Ni-Mn-Sn ferromagnetic shape memory alloy thin films

In the present study, we report the influence of grain size on structural and phase transformation behaviour of nanostructured Ni-Mn-Sn ferromagnetic shape memory alloy thin films synthesized by dc magnetron sputtering. With increase in substrate temperature, the structural phase changes from austenite with L2₁ cubic crystal structure to martensite with monoclinic structure. In addition, field-induced martensite-austenite transformation is observed in magnetization studies using superconducting quantum interference device magnetometer. The martensitic transformation behaviour of these films depends critically on the microstructure and dimensional constraint. Both, the martensite start temperature (M_s) and austenite finish temperature (A_f) of these nanostructured films decreases with decreasing grain size. The excess free volume associated with grain boundaries has been observed to increase with decrease in grain size which in turn leads to an increase in the number of grain boundaries. It has been proposed that the grain boundaries impose constraints on the growth of the martensite and confine the transformed volume fraction in nanocrystalline structure. A martensite phase nucleated within a grain will be stopped at the grain boundaries acting as obstacles for martensite growth. The investigations revealed that below a critical grain size of 10.8 nm, the austenite phase is observed to be more stable than the martensite phase which leads to the complete suppression of martensitic transformation in these films.     

Frequency dependent electrical transport properties of 4,4′,4″-tris(N-3-methylphenyl-N-phenylamine)triphenylamine by impedance spectroscopy

The frequency dependent ac conduction mechanism in 4,4′,4″-tris(N-3-methylphenyl-N-phenylamine)triphenylamine (m-MTDATA) has been studied as a function of applied bias and temperature. The Cole–Cole plot shows a slightly depressed semicircle indicating Debye type relaxation. This result has been explained by an equivalent circuit of the device designed as a two parallel resistor and capacitance network in series with contact resistance. The ac conduction studies under dc bias for hole only devices shows an increase in device conductivity with the increase in bias. The variation of bulk resistance with applied bias indicates Space Charge Limited Conduction (SCLC) mechanism for hole conduction. The hole mobility of the material has also been evaluated from SCLC as 8.859 × 10^?6 cm²/V s. The temperature dependent impedance studies show two activation energies indicating two different phase of the material with a phase transition at 235 K.