Heat transfer enhancement of concentrated solar absorber using hollow cylindrical fins filled with phase change material

A concentrated solar absorber with finned phase change materials was experimentally studied using a Scheffler type parabolic dish concentrator. The absorber's inner surface was fixed with hollow cylindrical containers filled with phase change material (PCM) for heat transfer augmentation. The absorber's selected PCM was acetanilide (Melting point of 116 °C)—the cylindrical capsules protruding into the fluid side to create turbulence and mixing and acting as fins. The absorber surface temperature was observed to be about 130–150 °C during the outdoor tests while passing fluid through the absorber. The fluid flow rate varied from 60 to 100 kg/h during the outdoor experiments. The peak energy and exergy efficiency of parabolic dish collector (PDC) at the fluid flow rate of 80 kg/h with PCM integrated solar absorber was found to be about 67.88% and 6.96%, respectively. The integration of cylindrical PCM containers resulted in more heat transfer augmentation in the solar absorbers. The optimized solar absorber could be suitable for various applications like steam generation, biomass gasification, space heating, and hydrogen generation.     

Optimal temperature policies for catalytic transport reactors under periodic operation

The influence of inlet gas concentration cycling on the optimal temperature policy of catalytic transport reactors is studied theoretically. The model considered is based on plug flow of gas and catalyst particles with negligible interand intra-particle diffusional resistances and concentration dependent deactivation kinetics. To utilise the concentration of the reactant and the activity of the deactivating catalyst fully a proper temperature sequence along the reactor is needed. Thus, a general optimal temperature policy using the continuous minimum principle is derived for the reactor under periodic operation. The model equations are solved analytically for gas concentration, activity and temperature profiles. Resonance behaviour (maximum in conversion with pulse width) is obtained using the optimal temperature policy for certain sets of parameters. The effects of activation energy groups, reaction and deactivation constant groups and inlet temperature on the optimal temperature policy under periodic operation are evaluated. In all cases an improvement in conversion with the optimal temperature policy under periodic operation over that with an isothermal policy under periodic operation is obtained. A suboptimal policy, comprising constant temperature over different reactor sections, which is useful for implementation purposes is also discussed.     

Fumed SiO2 nanoparticle reinforced biopolymer blend nanocomposites with high dielectric constant and low dielectric loss for flexible organic electronics

In the present study, fumed silica (SiO₂) nanoparticle reinforced poly(vinyl alcohol) (PVA) and poly(vinylpyrrolidone) (PVP) blend nanocomposite films were prepared via a simple solution‐blending technique. Fourier transform infrared spectroscopy (FTIR), ultraviolet–visible spectroscopy (UV–vis), X‐ray diffraction (XRD), and scanning electron microscopy (SEM) were employed to elucidate the successful incorporation of SiO₂ nanoparticles in the PVA/PVP blend matrix. A thermogravimetric analyzer was used to evaluate the thermal stability of the nanocomposites. The dielectric properties such as dielectric constant (?) and dielectric loss (tan δ) of the PVA/PVP/SiO₂ nanocomposite films were evaluated in the broadband frequency range of 10^?2 Hz to 20 MHz and for temperatures in the range 40–150 °C. The FTIR and UV–vis spectroscopy results implied the presence of hydrogen bonding interaction between SiO₂ and the PVA/PVP blend matrix. The XRD and SEM results revealed that SiO₂ nanoparticles were uniformly dispersed in the PVA/PVP blend matrix. The dielectric property analysis revealed that the dielectric constant values of the nanocomposites are higher than those of PVA/PVP blends. The maximum dielectric constant and the dielectric loss were 125 (10^?2 Hz, 150 °C) and 1.1 (10^?2 Hz, 70 °C), respectively, for PVA/PVP/SiO₂ nanocomposites with 25 wt % SiO₂ content. These results enable the preparation of dielectric nanocomposites using a facile solution‐casting method that exhibit the desirable dielectric performance for flexible organic electronics. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44427.     

Effect of Pasteurization and Retort Processing on Spectral Characteristics,Morphological, Thermal,Physico‐Mechanical,Barrier and Optical Properties of Nylon‐Based Food Packaging Materials

The effect of pasteurization and retort processing on spectral, morphological, thermal, physico‐mechanical, barrier and optical properties of three different packaging materials viz., PP/N6/PP, PET/N6/cPP and SiO_x‐PET/N6/cPP were studied. These packaging materials were packed with distilled water, which acted as a food simulant. Subsequently, these pouches were subjected to different thermal processing conditions such as pasteurization and retort processing. Both the processing techniques found to have retained the mechanical properties of all packaging materials. Water vapour transmission rate (WVTR) and oxygen transmission rate (OTR) of nylon‐based combinations were increased after processing. Gloss found to decrease invariably irrespective of the material and increases with the severity of the treatment. XRD diffractogram shows changes in crystal structure as a result of thermal processing, and SEM analysis shows the crystal fragmentation. Absorption of water by the amide group of nylon 6 was observed, which could be a reason for the increase in OTR and WVTR. Copyright © 2014 John Wiley & Sons, Ltd.     

Graphene oxide reinforced polyvinyl alcohol/polyethylene glycol blend composites as high-performance dielectric material

Novel flexible dielectric composites composed of polyvinyl alcohol (PVA), polyethylene glycol (PEG), and graphene oxide (GO) with high dielectric constant and low dielectric loss have been developed using facile and eco-friendly colloidal processing technique. The structure and morphology of the PVA/PEG/GO composites were evaluated using Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, UV-vis spectroscopy (UV-vis), X-ray diffraction (XRD), scanning electron microscopy (SEM), and atomic force microscopy (AFM). The dielectric behavior of PVA/PEG/GO composites was investigated in the wide range of frequencies from 50 Hz to 20 MHz and temperature in the range 40 to 150 °C using impedance spectroscopy. The dielectric constant for PVA and PVA/PEG (50/50) blend film was found to be 10.71 (50 Hz, 150 °C) and 31.22 (50 Hz, 150 °C), respectively. The dielectric constant for PVA/PEG/GO composite with 3 wt% GO was found to be 644.39 (50 Hz, 150 °C) which is 60 times greater than the dielectric constant of PVA and 20 times greater than the dielectric constant of PVA/PEG (50/50) blend film. The PVA/PEG/GO composites not only show high dielectric constant but also show low dielectric loss which is highly attractive for practical applications. These findings underline the possibilities of using PVA/PEG/GO composites as a flexible dielectric material for high-performance energy storage applications such as embedded capacitors.     

Facile synthesis of heterostructure NiO–SnO2 nanocomposite for selective electrochemical determination of l-cysteine

Journal of Materials Science: Materials in Electronics - In this present research, heterostructure NiO–SnO2 nanocomposite modified electrode was developed to determine l-cysteine molecule....     

Evaluation of potential anti‐cancer activity of cationic liposomal nanoformulated Lycopodium clavatum in colon cancer cells

Research dealing with early diagnosis and efficient treatment in colon cancer to improve patient''s survival is still under investigation. Chemotherapeutic agent result in high systemic toxicity due to their non‐specific actions on DNA repair and/or cell replication. Traditional medicine such as Lycopodium clavatum (LC) has been claimed to have therapeutic potentials against cancer. The present study focuses on targeted drug delivery of cationic liposomal nanoformulated LC (CL‐LC) in colon cancer cells (HCT15) and comparing the efficacy with an anti‐colon cancer drug, 7‐ethyl‐10‐hydroxy‐camptothecin (SN38) along with its nanoformulated form (CL‐SN38). The colloidal suspension of LC was made using thin film hydration method. The drugs were characterised using ultraviolet, dynamic light scattering, scanning electron microscopy, energy, dispersive X‐ray spectroscopy. In vitro drug release showed kinetics of 49 and 89% of SN38 and LC, whereas CL‐SN38 and CL‐LC showed 73 and 74% of sustained drug release, respectively. Studies on morphological changes, cell viability, cytotoxicity, apoptosis, cancer‐associated gene expression analysis of Bcl‐2, Bax, p53 by real‐time polymerase chain reaction and western blot analysis of Bad and p53 protein were performed. Nanoformulated LC significantly inhibited growth and increased the apoptosis of colon cancer cells indicating its potential anti‐cancer activity against colon cancer cells.Inspec keywords: cancer, biological organs, cellular biophysics, drug delivery systems, drugs, nanomedicine, genetics, DNA, molecular biophysics, biochemistry, lipid bilayers, toxicology, suspensions, colloids, light scattering, X‐ray chemical analysis, solvation, enzymes, nanostructured materialsOther keywords: energy dispersive X‐ray spectroscopy, in vitro drug release, morphological changes, cell viability, cytotoxicity, apoptosis, cancer‐associated gene expression analysis, Bcl‐2, Bax, real‐time polymerase chain reaction, western blot analysis, Bad protein, p53 protein, scanning electron microscopy, dynamic light scattering, ultraviolet scattering, thin film hydration method, colloidal suspension, nanoformulated form CL‐SN38, 7‐ethyl‐10‐hydroxy‐camptothecin, anticolon cancer drug, colon cancer cells HCT15, cationic liposomal nanoformulated LC, targeted drug delivery, therapeutic potentials, Lycopodium clavatum, traditional medicines, cell replication, DNA repair, nonspecific actions, high systemic toxicity, chemotherapeutic agents, patient survival, colon cancer treatment, colon cancer diagnosis, CL‐LC, potential anticancer activity     

On the Corrosion Performance of Monel 400 in Molten LiCl-Li2O-Li at 923 K

Metallurgical and Materials Transactions A - The corrosion resistance of a Ni-Cu alloy, Monel 400, in molten LiCl-Li2O-Li at 923 K (650 °C) was investigated. Exposure testing...     

Calf massager: Intervention for body muscle discomfort during prolonged standing

Many occupations require workers to stand for long periods of time without proper interventions, which causes discomfort in the back and lower limbs. Therefore, this study aims to assess the effectiveness in alleviating body muscle discomfort during prolonged standing through the use of a calf massager. This study was conducted among male workers at a manufacturer with production line workers and the list was obtained from the HR Department and simple random sampling was done by number categorization. A total of 100 respondents (50 respondents for both the control and the experimental groups) participated in this study. The experiment took place in a room with a similar setup for the production line. Each respondent was requested to perform the simulated task for 2 hr. For the experimental group, the calf massager was turned on every 15 min. At every 15‐min interval after turning on the calf massager, respondents from both groups were required to evaluate their discomfort level on a Borg's scale CR‐10 questionnaire. The results showed that the level of body discomfort among respondents in the experimental group reduced (20–30%) compared with that of the control group. Multivariate analysis results revealed that the discomfort rating for the lower back, knees, thighs, calves, and feet was significantly lower (p < .05) among the experimental group compared with the control group. For lower body parts, the lower back region was statistically significant (p < .05) at the 90th, 105th, and 120th min; the thigh region was statistically significant (p < .05) at the 120th min; the knee region was statistically significant (p < .05) at the 105th and 120th min; the calf region was statistically significant (p < .05) at all minute intervals except the 15th and 45th min, while the feet region, was statistically significant at the 105th and 120th min. Therefore, this study indicates that calf massage treatment is capable of reducing body muscle discomfort during prolonged standing and highlights the significance of calf massage.