Characterisation and Assessment of the Role of Barley Malt Endoproteases During Malting and Mashing1

Barley malt endoproteases (EC.3.4.21) develop as multiple isoforms mainly during grain germination and pass through kilning almost intact. Thermostability, under simulated mashing conditions, varied from low to high depending on the substrate used in the assay. This suggests that individual enzymes respond differently to heat exposure and to protein substrates. The optimal pH with haemoglobin was pH 3.5, with hordein pH 4 and with glutelin pH 5. The optimal temperature with hordein was 40°C, with glutelin 50°C and with haemoglobin 60°C. These differences suggest that it is not possible to comprehensively characterise all malt endoproteases under one set of assay conditions. In brewing, most of the barley protein degradation (> 70 %) occurs during malting. But some proteinases remain active during mashing and contribute to wort soluble proteins and free amino nitrogen. Their contribution to all malt EBC mash total free amino nitrogen was 25 % in Schooner (Australian) and 30 % in Morex (USA). The importance of proteolytic activity during mashing and the possibility that the levels may not be adequate, at high solid adjunct ratios, are acknowledged.     

A comparative prediction for tensile properties of ternary blended open-end rotor yarns using regression and neural network models

This study focused on predicting tensile properties of PES/CV/PAN blended Open-End Rotor yarns. The effective factors were fiber blend ratios (six stages from 0 to 100%), linear density (three count levels), mixing method (carding machine and drawframe), and number of passages in drawframe (one and two times) as production parameters. We performed a stepwise multiple linear regression (MLR) analysis and established an artificial neural network (ANN) model that trained with backpropagation rule as Levenberg–Marquardt. Then, we conducted a comparative analysis for both models in terms of prediction performance. As a result, ANN has given a slightly better prediction values than MLR for breaking strength but significantly better prediction values for breaking elongation.     

An electrical network for the numerical solution of transient mhd couette flow of a dusty fluid: Effects of variable properties and hall current

The Network Simulation Method (NSM) has been used to study the variations with velocity of suction, hall effect, Reynolds and Hartmann number, particle concentration and Eckert number on the unsteady MHD Couette Flow and heat transfer of a dusty and electrically conducting fluid between parallel plates in the presence of an external uniform magnetic field and uniform suction and injection. The solutions are obtained with the network model proposed and the electric circuit simulation program PSpice. The fluid is acted upon by a constant pressure gradient and an external uniform magnetic field is applied perpendicular to the plates. Due to the presence of uniform suction and injection, the Hall Effect is not dismissed. The NSM is applied to solve the steady-state and transient problems of flow and heat transfer for both the fluid and dust particles. This method requires only discretization of the spatial co-ordinates, while time remains a real continuous variable. Velocity and temperature are studied for different values of the viscosity and magnetic field parameters and for different particle concentrations and upper wall velocities.     

Temperature Dependent Current Transport Mechanism of Photopolymer Based Al/NOA60/p-Si MPS Device

A photopolymer based Al/Norland Optical Adhesive 60 (NOA60)/p-Si MPS (metal-polymer-semiconductor) device was fabricated by a combination of vacuum evaporation and smear technique. The current transport properties of the device were investigated by using the forward bias current–voltage (I-V) characteristic in the temperature range of 80–300 K. The cross-sectional structure of polymer/semiconductor was revealed by the scanning electron microscope (SEM) image and it was seen that the NOA60 photopolymer was tidily coated on the p-Si surface. According to the I-V measurements at room temperature, the MPS device exhibits a good rectification ratio of 8140 at?±?1 V. The temperature-dependent I-V measurements (I-V-T) were analyzed based on the thermionic emission (TE) theory and an abnormal increase in zero-bias barrier height (BH) and a decrease in ideality factor (n) was observed with increasing temperature. Additionally, two different linear regions with distinct values from the theoretical value of the Richardson constant (A*) were observed in the conventional Richardson plot. Such deviations from the ideal TE theory have been attributed to the effect of BH inhomogeneities. Gaussian distribution (GD) of the BH model has applied the I-V-T results and the double GD BH with mean values of 0.75?±?0.08 eV (80–140 K) and 1.02?±?0.11 eV (140–300 K) were calculated. Moreover, the A* value of 31.4 A/cm²K² was calculated close to the known value of p-Si from the modified Richardson plot. Thus, it has been concluded that the current transport of the Al/NOA60/p-Si MPS device can be explained by TE with a double GD BH model for a wide temperature region.

     

Anonymous location sharing in urban area mobility

Knowledge and Information Systems - This work studies the location-privacy preserving location update in the context of data-centric people mobility applications. The mobility model involves an...     

Efficient selective replication of critical code regions for SDC mitigation leveraging redundant multithreading

The Journal of Supercomputing - Redundant multithreading (RMT) is an effective reliability solution that provides thread-level replication; however, it imposes additional overheads in terms of...     

Effect of Boronizing on Operating Stability of Steel AISI 304L under Erosion Impact of Hard Particles

Metal Science and Heat Treatment - The effect of solid boronizing at 950°C for 2 and 4 h on the phase composition, microstructure, hardness and abrasive wear of steel AISI 304L is studied...