Changes in the Composition of Raw Tea Leaves from the Korean Yabukida Plant during High-Temperature Processing to Pan-Fried Kamairi-Cha Green Tea

ABSTRACT:  To develop a better understanding of compositional changes occurring during the production of commercial teas, we determined by high-performance liquid chromatography (HPLC) changes in ingredient levels during each of several manufacturing steps used to produce Kamairi-cha, a premium green tea. Kamairi-cha uses pan-frying instead of the usual blanching technique to inactivate the enzymes responsible for producing traditional black tea. The resulting tea lacks the characteristic bitterness of green tea, producing a green tea that is described as sweet tasting. The processing steps used to produce this pan-fried tea were as follows: 1st roasting, 1st rolling, 2nd roasting, 2nd rolling, 1st firing, and 2nd firing. The results show that during production at temperatures up to 300 °C, raw leaves lost (in percent) 97.3 water, 94 two chlorophylls, 14.3 seven catechins, and 2.75 caffeine. A separate analysis showed that the final product contained 21.67 mg/g dry wt of the biologically active amino acid theanine. The results of this 1st report on changes in individual catechins and other tea ingredients in tea leaves during pan-frying make it possible to select production conditions that maximize levels of beneficial tea ingredients. The possible significance of the results for the human diet is discussed.     

Numerical investigation of zoomable holographic projection without a zoom lens

Holographic projection is for laser displays and has the merits of being aberration free, producing high‐contrast images, having the ability of color reconstruction with one spatial light modulator, and so on. In this paper, we propose a zoomable holographic projection without using a zoom lens and verify the proposed method by using numerical simulation. Although such a system can be readily realized to use the features of holography, which is capable of recording a large image exceeding the hologram size, the required calculation is very time consuming. For acceleration, we used shifted Fresnel diffraction for setting different sampling rates on a hologram and projected image. The proposed method can project any zoom‐in and zoom‐out image between zeroth‐order and first‐order lights, and the processing time and required memory for the zoom are constant.     

Effect of TiO2 thin film thickness and specific surface area by low-pressure metal–organic chemical vapor deposition on photocatalytic activities

TiO₂ photocatalyst films having an anatase crystal structure with different thickness were prepared by the low-pressure metal–organic chemical vapor deposition (LPMOCVD) to examine the effect of growth conditions on photocatalytic activity. Film thickness was linearly proportional to the deposition time. Structure of the film was strongly dependent on the deposition time. In early stage of deposition, fine particles deposit on the substrate. As increasing the deposition time, crystal orientation is gradually selected following the Kolmogorov model and c-axis oriented columnar crystals become dominant. The photocatalytic activity strongly depends on the film deposition time (or film thickness) in nonlinear way. The optimum thickness of TiO₂ catalyst film grown by LPMOCVD may locate between 3 and 5 μm.     

241Am as a metabolic tracer for inhaled plutonium nitrate in external chest counting

The plutonium (Pu) treated in the nuclear fuel cycle is usually accompanied by 241Am produced from 241Pu by beta disintegration, which emits gamma rays of 60 keV with the emission rate of 0.36, being more penetrating than the L X rays from Pu. The 241Am could imprve the detection limit of chest counting of Pu, if it was being used as a metabolic tracer for Pu in lungs. Young adult male Wistar rats were exposed to polydisperse aerosols of Pu(NO3)4 with 0.6 microm in activity median aerodynamic diameter. They were periodically killed and the radioactivity of 241Am was cleared from the lungs at almost the same rate as the Pu at least for half a year post-inhalation, which proved the validity of 241Am as a metabolic tracer for inhaled Pu nitrate in external chest counting.     

Impact of the Coulomb interaction on nano-scale silicon device characteristics

Monte Carlo simulations coupled self-consistently with the three-dimensional Poisson equation are carried out under the double-gate MOSFET structures. The Coulomb force experienced by an electron inside the device is directly evaluated by performing the Monte Carlo simulations with or without the full Coulomb interaction and the Coulomb force on the channel electron corresponding to plasmon excitations is clarified. It is pointed out that the consistency of the boundary condition is achieved only if the long-range Coulomb interaction is properly taken into account, and this is crucial for predicting reliable device characteristics in ultra-small devices. The drain current and transconductance are greatly reduced if the self-consistent potential fluctuations are taken into account.     

Self-dissolving micropile array tips for percutaneous administration of insulin

Two kinds of insulin were loaded into self-dissolving micropile array tip (following tip). Fully-loaded tip (f-tip) and partially-loaded tip (p-tip) were prepared using chondroitin sulfate for the percutaneous administration of insulin. One hundred micropiles were constructed on a 1.0 × 1.0 cm tip. The mean length of the micropile in a tip were 483.4 ± 4.7 μm for the f-tip and 492.6 ± 2.4 μm for the p-tip. The insulin content of the p-tip was 28.5% of that of the f-tip. The pharmacological efficiency of insulin loaded tip was evaluated in rat experiments by measuring their hypoglycemic effects. The maximum hypoglycemic effect of insulin was observed at 1.7 ± 0.2 h for the f-tip and 1.5 ± 0.2 h for the p-tip. Good dose-dependency was observed for the plasma glucose level vs. time curves. These results suggest the usefulness of p-tip as a percutaneous DDS of insulin.     

Thickening of grain-boundary α allotriomorphs in a Ti-Cr alloy by multiple sets of ledges

A computer model is developed to simulate the growth of grain-boundary allotriomorphs having more than one set of growth ledges at their interfaces. The growth is controlled by the volume diffusion of solute to or from the riser of a ledge. The time dependence of the growth rate of two orthogonal sets of ledges is found to be somewhat different from that of a single set of ledges. However, the operation of multiple sets of ledges is unlikely to alter significantly the growth kinetics of grain-boundary allotriomorphs from those predicted from the disordered growth theory, except at small ledge spacings or at short reaction times. Faster growth kinetics of proeutectoid α allotriomorphs than those of either planar or ellipsoidal disordered boundaries which have been reported in a Ti-6.6 at. pet Cr alloy are not likely to be accounted for with the heights and spacings of double sets of ledges actually observed on the interfaces of allotriomorphs. Hence, the grain-and interphase-boundary diffusion-assisted growth of precipitates, (rejector plate mechanism, RPM) appears to be operative during the growth of a allotriomorphs, as previously proposed on the basis of growth-rate measurements. This paper is based on a presentation made in the symposium “The Role of Ledges in Phase Transformations” presented as part of the 1989 Fall Meeting of TMS-MSD, October 1–5, 1989, in Indianapolis, IN, under the auspices of the Phase Transformations Committee of the Materials Science Division, ASM INTERNATIONAL.     

High-pressure solubility of fullerene C60 in toluene

The solubility of fullerene C₆₀ in toluene was measured at temperatures between 278.2 and 308.2 K and pressures up to 340 MPa, and also at temperatures between 258.2 and 298.2 K under atmospheric pressure. The solubility increased with increasing pressure, and then decreased with a sharp maximum, suggesting a transition between solid phases. A thermodynamic analysis of the solubility supported the proposal of Korobov, et al. that the two solids correspond to C₆₀ (fcc) and C₆₀ · 2 (toluene) solvate. The solubility enhancement of C₆₀ by pressure in a low-pressure region is an unusual phenomenon when compared with the decrease in solubility of nonpolar molecular solids generally observed with rises in pressure.     

Sintering Kinetics at Isothermal Shrinkage: Effect of Specific Surface Area on the Initial Sintering Stage of Fine Zirconia Powder

The isothermal shrinkage behaviors of fine zirconia powders (containing 2.8–2.9 mol% Y₂O₃) with specific surface areas of about 6 and 16 m²/g were investigated to clarify the effect of specific surface area on the initial sintering stage. The shrinkage of powder compact was measured under constant temperatures in the range of 1000°–1100°C. The increase in specific surface area enhanced the densification rate with increasing temperature. The values of activation energy ( Q ) and frequency-factor term (β₀) of diffusion at initial sintering were estimated by applying the sintering-rate equation to the isothermal shrinkage data. The Q of diffusion changes little but the β₀ increases with the increase in specific surface area. It is therefore concluded that the increase in the specific surface area of fine zirconia powder enhances the shrinkage rate because of an increase in the β₀ at the initial stage of sintering.     

Acid catalytic hydrothermal conversion of carbohydrate biomass into useful substances

Acidic hydrothermal degradation of glucose was examined in the presence of HCl, H₂SO₄, and H₃PO₄ with pH varying from 1.5 to 2.5 and reaction time varying from 1 to 10 min at 523 K, to investigate the effect of different acid catalysts and acid concentration on the production of 5-hydroxymethyl-2-furaldehyde (HMF) and levulinic acid from glucose. At lower acidities of pH 2.5, a considerably higher amount of HMF was produced. The increase in acid concentration accelerated the conversion of HMF to levulinic acid. The order for the production of HMF using the three acids is in the sequence of H₃PO₄ > H₂SO₄ > HCl. On the contrary, the order for production of levulinic acid follows HCl > H₂SO₄ > H₃PO₄. In the experimental conditions used in this study, the highest yield of levulinic acid is about 55%, which was obtained at pH 1.5 for 5 min in the case of HCl as an acid catalyst, and the total highest yields of HMF and levulinic acid are about 50%, which occurred at pH 2.0 for 5 min in the case of H₃PO₄ as an acid catalyst.