MiR-10a in Pancreatic Juice as a Biomarker for Invasive Intraductal Papillary Mucinous Neoplasm by miRNA Sequencing

New biomarkers are needed to further stratify the risk of malignancy in intraductal papillary mucinous neoplasm (IPMN). Although microRNAs (miRNAs) are expected to be stable biomarkers, they can vary owing to a lack of definite internal controls. To identify universal biomarkers for invasive IPMN, we performed miRNA sequencing using tumor-normal paired samples. A total of 19 resected tissues and 13 pancreatic juice samples from 32 IPMN patients were analyzed for miRNA expression by next-generation sequencing with a two-step normalization of miRNA sequence data. The miRNAs involved in IPMN associated with invasive carcinoma were identified from this tissue analysis and further verified with the pancreatic juice samples. From the tumor-normal paired tissue analysis of the expression levels of 2792 miRNAs, 20 upregulated and 17 downregulated miRNAs were identified. In IPMN associated with invasive carcinoma (INV), miR-10a-5p and miR-221-3p were upregulated and miR-148a-3p was downregulated when compared with noninvasive IPMN. When these findings were further validated with pancreatic juice samples, miR-10a-5p was found to be elevated in INV (p = 0.002). Therefore, three differentially expressed miRNAs were identified in tissues with INV, and the expression of miR-10a-5p was also elevated in pancreatic juice samples with INV. MiR-10a-5p is a promising additional biomarker for invasive IPMN.     

Detection of hepatitis C virus RNA in the liver by in situ hybridization

To examine HCV infection histologically, we attempted non-radioactive in situ hybridization of HCV-RNA in the liver. We amplified cDNA probe (360 base pairs) by PCR using the primers deduced from the core region of the HCV genome. The probe was labelled with digoxigenin by PCR and used for in situ hybridization on paraformaldehyde-fixed frozen liver sections. The hybrids were visualized immunohistochemically with alkaline-phosphatase-conjugated anti-digoxigenin and alkaline-phosphatase substrates. HCV-RNA-cDNA hybrids were detected in 21 of 24 patients with positive serum HCV markers, whereas there were no positive signals in the liver of 12 cases without HCV infection. The signal intensity of HCV-RNA-cDNA hybrids was abolished after RNase treatment. Various other specificity experiments also verified specific hybridization of HCV-RNA-cDNA. HCV-RNA was visualized in liver cells and most of them were regarded as hepatocytes from their characteristic features. The infected hepatocytes were frequently associated with mononuclear cell infiltration. Hepatocytes positive for HCV-RNA were sometimes binuclear and distributed in various patterns among cases tested. The present in situ hybridization of HCV RNA is highly sensitive and specific and the results suggest the host immune response to HCV-infected cells.     

X-ray absorption fine structure study on residue bromine in carbons with different degrees of graphitization

The structure of bromine residue compounds was investigated by X-ray absorption fine structure (XAFS) in order to interpret where and how bromine is present in carbons with different degrees of graphitization. The residue compounds can be classified into three groups, as obtained from X-ray absorption near edge structure (XANES) spectra and the values of the intramolecular distance r_Br–Br determined by extended X-ray absorption fine structure (EXAFS). In Group I, prepared from the host carbons heat treated at temperatures higher than 1900 °C, bromine exists in the interlayer space of graphite in the form of Br₂ molecules with interaction of the π electrons of graphite. In Group III, from carbon heat treated at 1000 °C, most of the bromine probably reacts with carbon atoms having a dangling bond or functional groups. For Group II, where the host carbons are heat treated at intermediate temperatures, it is likely that bromine exists in undeveloped defects with a unique electronic state.     

Measurement of the isotopic abundance of boron-10 by inductively coupled plasma-quadrupole mass spectrometry

This article describes the method for measuring the isotopic abundance of ¹⁰B in nuclear grade boron carbide using inductively coupled plasma-quadrupole mass spectrometry (ICP-QMS). The results of investigation revealed that both the integration time and the dwell time have a major influence on the reproducibility of ICP-QMS measurements. As a result of optimization of the measurement conditions, reproducibility below 0.2% relative standard deviation (RSD) (0.17% RSD maximum) was achieved. In addition, the measured value of the isotopic abundance of ¹⁰B for each sample well agreed with the values measured by the TIMS. Thus, the method described in the present investigation was very effective in the analysis of isotopic abundance of ¹⁰B in B₄C or H₃BO₃. The results of this study suggest that ICP-QMS could be applied to the precise analysis of the isotopic abundance of ¹⁰B required in the field of nuclear applications.     

Sintering Kinetics at Isothermal Shrinkage: II, Effect of Y2O3 Concentration on the Initial Sintering Stage of Fine Zirconia Powder

The shrinkage behavior of fine zirconia powders containing 2.9 and 7.8 mol% Y₂O₃ was investigated to clarify the effect of Y₂O₃ concentration on the initial sintering stage. The shrinkage of powder compact was measured under both conditions of constant rates of heating (CRH) and constant temperatures. CRH measurements revealed that when the Y₂O₃ concentration of fine zirconia powder increased, the starting temperature of shrinkage shifted to a high temperature. Isothermal shrinkage measurements revealed that the increase in Y₂O₃ concentration causes the shrinkage rate to decrease. The values of activation energy ( Q ) and frequency-factor term (β₀) of diffusion at initial sintering were estimated by applying the sintering-rate equation to the isothermal shrinkage data. When the Y₂O₃ concentration increases, both Q and β₀ of diffusion increase. It is, therefore, concluded that the increase in Y₂O₃ concentration of fine zirconia powder decreases the shrinkage rate because of increasing Q of diffusion at the initial stage of sintering.     

Synthesis of polyamides from sugar derived d-glucaric acid and xylylenediamines

d -Glucaric acid (GA) is the one of aldaric acids and is an important bio-based building block for polymers. In this study, poly(m-xylylene-acetyl glucaramide) and poly(p-xylylene-acetyl glucaramide) were synthesized from GA acetate and two kind of aromatic diamines by solution polymerization. The chemical structures of the polyamides were analyzed by nuclear magnetic resonance spectroscopy. The weight-average molecular weights ranged from 3.3 × 10³ to 1.15 × 10⁴ with a polydispersity of 1.6–1.9, depending on monomer ratio or monomer concentration in solution. The 10% decomposition temperature of the polymers was about 210 °C. Differential scanning calorimetry revealed that the polyamides exhibited no peaks attributed to crystallization or melting point, which indicated that the polyamides were amorphous. No crystalline pattern was observed in the X-ray diffractograms, supporting this result. Polarized optical microscopy observation revealed that the polyamides exhibited melting-like behavior at above 150 °C, which was attributed to glass-transition behavior. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47255.     

Controlling the drug release rate from biocompatible polymers with micro-patterned diamond-like carbon (DLC) coating

During the past year, we have witnessed the evolution of an intense public controversy regarding late thrombosis following implantation of drug eluting stent (DES) in patients with obstructive coronary artery disease. To overcome the problem, DES should possess sufficient biocompatibility and non-thrombogenicity with a controlled drug release system. A new DES composed of biocompatible polymers coated with antithrombogenic diamond-like carbon (DLC) coating was proposed. In this study, the drug release profile of the newly proposed drug eluting system was thoroughly investigated. Three polymers were selected as base drug-reservoir materials: hydrophilic 2-methacryloyloxyethyl phosphorylcholine (MPC), hydrophobic poly (ethylene-co-vinyl acetate) (EVA) and less hydrophobic polyurethane (PU). The three polymers are currently used or studied for biomedical materials, while MPC and DLC were already confirmed as excellent biocompatible materials with antithrombogenicity. After coating the lattice-like patterned DLC on both polymers containing drug, samples were soaked in 2 ml of medium of phosphate-buffered saline with 10% ethanol. The drug release rate was measured by a spectrophotometer. The percentile cover area of patterned DLC on polymers was varied from 0% (without DLC) to 100% (fully covered). The sample without DLC coating presented an initial burst of the drug release from the polymer matrix, whereas the DLC-coated samples inhibited the initial burst release from polymers within the first five days of the experiments. It was found that the drug eluting profiles could be effectively controlled by changing the cover area of micro-patterned DLC coatings on polymers, which may be applicable to the next-generation DES system that eventually prevents late thrombosis.     

Functionalized Bilayer Membranes as Artificial Transaminase: Modification of the Active Site and Its Consequence in Catalytic Efficiency

The transamination reaction of l-phenylalanine with pyruvate as catalyzed by the artificial transaminase formed with synthetic bilayer aggregates was examined in aqueous media under mild kinetic conditions. Each catalyst system was constructed with a combination of a synthetic peptide lipid, a hydrophobic vitamin B₆ derivative, and metal ions. Modification of the active site in the present artificial transaminase was performed by changing a combination of molecular components constituting the catalytic system. While the catalytic activity was scarcely influenced by differences in aggregate structure, single- or multi-walled bilayer, and in copper-(II) concentration, molecular structures of the hydrophobic vitamin B₆ and an amino acid residue of the peptide lipid had significant effects on the reactivity.     

Steam gasification of coal cokes in an internally circulating fluidized bed of thermal storage material for solar thermochemical processes

A laboratory-scale prototype windowed internally circulating fluidized-bed reactor made of quartz sand and coal coke particles was investigated for steam gasification using concentrated Xe-light radiation as the energy source. The quartz sand was used as a chemically inert bed material for the fluidized bed, while the coal coke particles functioned as the reacting particles for the endothermic gasification reaction. The advantages of using quartz sand as the bed material for the directly irradiated gasification reactor are as follows: (1) The bed height is maintained at a constant level during the gasification. (2) The quartz sand functions as a thermal transfer/storage medium inside the reactor. The gasification performances such as the production rates of CO, H₂, and CO₂; carbon conversion; and light-to-chemical energy conversion were evaluated for the fluidized-bed reactor with a thermal transfer/storage medium (quartz sand). The effects of using the bed material (quartz sand) on the gasification performance are described in this paper.