ZnO nano-ridge structure and its application in inverted polymer solar cell

We report a unique nano-ridge structure of zinc oxide (ZnO) and its application in high performance inverted polymer solar cells. The ZnO nano-ridge structure was formed by a sol–gel process using a ramp annealing method. As the solvent slowly evaporated due to the low heating rate, there was sufficient time for the gel particles to structurally relax and pile up, resulting in a dense and undulated film. Nano-ridges with peak as high as 120 nm and valley to valley distance of about 500 nm were formed. This film provided an effective hole blocking layer and also an increased interfacial area for electron collection. An inverted bulk heterojunction polymer solar cell was fabricated using the ZnO nano-ridge film as the electron collecting layer. The device showed a high power conversion efficiency of 4.00%, an improvement of about 25% over similar solar cells made with a planar film of ZnO nanoparticles.     

Thin-film transistors based on liquid-crystalline tetrafluorophenylter thiophene derivatives: thin-film structure and carrier transport

The authors fabricated thin films by solution processes using liquid-crystalline (LC) semiconductors, 5-alkyl-5’’-(4-hexyltetrafluorophenyl)-2,2’:5’,2’’-terthiophene (2–5). Films of 5-propyl-5’’-(4-hexyltetrafluorophenyl)-2,2’:5’,2’’-terthiophene (2) show similar molecular packing as their non-fluorinated counterparts. However, the degree of molecular packing ordering from X-ray diffraction measurement is higher, and the films exhibit a more crystal-like structure. Moreover, fluorination has a remarkable effect on their mesomorphic behaviors. Films of 2 consist of large size LC domains (in the range of 100 μm) at room temperature. Thin-film transistors (TFTs) of 2 show p-type operation with good hole mobility up to 0.027 cm²/Vs as well as improved operation stability under ambient conditions and high on/off ratio. Tetrafluorophenyl substitution leads to lowering of HOMO energy by 0.15 eV for 2 and 0.35 eV for 5, resulting in operation stability. Variable-temperature current-voltage measurements indicate intrinsic carrier transport in films of 2.     

Emissions and environmental implications of mercury from artisanal gold mining in North Sulawesi,Indonesia

In artisanal gold mining practiced in North Sulawesi Island, Indonesia, gold is separated from ore by the use of mercury, which forms an amalgam with gold. All related processes are undertaken with a low level of technical knowledge and skills, no regulation, and with disregard for the safety of human and environment health. The situation is generating serious potential health and environmental risks in the area. As part of an ongoing monitoring program, total mercury concentrations were examined in water, bottom sediment and fish samples from three main rivers in Talawaan Watershed, which receives drainage from gold mining practices. Monitoring began in May-June 2000, almost 2 years after artisanal gold mining had begun. At that time, the mercury concentration in the sediment was generally low, except in places close to the gold processing plants. In the present study, a more systematic sampling and analysis was conducted in May-June 2001. Bottom surface sediments, water, and fish samples were collected at 12 sites along the three main rivers in the watershed. In addition, one site outside the watershed was sampled to serve as a control. Sample collections were conducted in three phases in duplicate, with two-week intervals between each phase. The mercury concentration observed in this study indicated that an increase took place along the three main rivers in the watershed. Solutions to this problem must be formulated as soon as possible in order to avoid a major health, economic, and ecological disaster arising from the continuing discharge of Hg. The present study proposes that mercury dispersion occur downstream of the mining.     

Thermocapillary convection in a shallow annular pool heated from inner wall

In order to discover the effect of heating direction on the thermocapillary convection, three-dimensional numerical simulations have been conducted in a shallow annular pool (depth d=1 mm) of silicone oil (0.65 cSt, Pr=6.7) differentially heated from the inner wall. The linear stability analysis predicts a critical temperature difference (ΔT_c) for the incipience of hydrothermal wave (HTW) is 4.58K, which is less than ΔT_c=5.0K for a pool heated at the outer wall. Numerical simulations predict that two groups of HTWs, propagating in azimuthal directions opposite to each other, always coexist in the pool. Simulations with pool rotation around the axis elucidate that pool rotation up to 1.05 rad/s gives no distinguishable effect on the behavior of HTW in an inner heated pool, whereas the HTW patterns in an outer heated pool are significantly modified by rotation.     

In-plane detection of scattered light from a minute particle using a resin-based light waveguide incorporated with a microfluidic channel

An optical sensor combined total analysis system (TAS) is thought to be one of the most powerful functional elements needed to realize a “ubiquitous human healthcare” system. In accordance with this concept, we have proposed a fundamental structure of detecting side scattered light from a minute cell or particle running along a microfluidic channel, partially utilizing the channel filled with water or saline solution as a light waveguide. Based on this concept, we have fabricated a trial-manufactured optical TAS chip and carefully evaluated its side scattered light measuring performance in in-plane direction, supplying and detecting visible laser power by using multiple optical fibers and their precise positioning mechanisms. We have successfully obtained experimental results of both transmitted light power change and that of side scattered light, and we confirmed that there was a strong relationship between their signal waveforms. Furthermore, we have developed a hybrid numerical calculation method on the basis of the finite-difference time-domain method, in addition to the beam propagation method. Based on this hybrid method, we tried to compare results between the experimental inverse pulse of transmitted light and a pulse of side scattered light, and those based on numerical calculations. Excellent qualitative accordance was obtained between the inverse pulse of numerical and experimental results. In contrast, the experimental pulse of side scattered light indicated a considerably spread base in comparison to the numerical results.     

Impact of the Coulomb interaction on nano-scale silicon device characteristics

Monte Carlo simulations coupled self-consistently with the three-dimensional Poisson equation are carried out under the double-gate MOSFET structures. The Coulomb force experienced by an electron inside the device is directly evaluated by performing the Monte Carlo simulations with or without the full Coulomb interaction and the Coulomb force on the channel electron corresponding to plasmon excitations is clarified. It is pointed out that the consistency of the boundary condition is achieved only if the long-range Coulomb interaction is properly taken into account, and this is crucial for predicting reliable device characteristics in ultra-small devices. The drain current and transconductance are greatly reduced if the self-consistent potential fluctuations are taken into account.     

Self-dissolving micropile array tips for percutaneous administration of insulin

Two kinds of insulin were loaded into self-dissolving micropile array tip (following tip). Fully-loaded tip (f-tip) and partially-loaded tip (p-tip) were prepared using chondroitin sulfate for the percutaneous administration of insulin. One hundred micropiles were constructed on a 1.0 × 1.0 cm tip. The mean length of the micropile in a tip were 483.4 ± 4.7 μm for the f-tip and 492.6 ± 2.4 μm for the p-tip. The insulin content of the p-tip was 28.5% of that of the f-tip. The pharmacological efficiency of insulin loaded tip was evaluated in rat experiments by measuring their hypoglycemic effects. The maximum hypoglycemic effect of insulin was observed at 1.7 ± 0.2 h for the f-tip and 1.5 ± 0.2 h for the p-tip. Good dose-dependency was observed for the plasma glucose level vs. time curves. These results suggest the usefulness of p-tip as a percutaneous DDS of insulin.     

High-pressure solubility of fullerene C60 in toluene

The solubility of fullerene C₆₀ in toluene was measured at temperatures between 278.2 and 308.2 K and pressures up to 340 MPa, and also at temperatures between 258.2 and 298.2 K under atmospheric pressure. The solubility increased with increasing pressure, and then decreased with a sharp maximum, suggesting a transition between solid phases. A thermodynamic analysis of the solubility supported the proposal of Korobov, et al. that the two solids correspond to C₆₀ (fcc) and C₆₀ · 2 (toluene) solvate. The solubility enhancement of C₆₀ by pressure in a low-pressure region is an unusual phenomenon when compared with the decrease in solubility of nonpolar molecular solids generally observed with rises in pressure.     

Convergence acceleration of the rational Runge-Kutta scheme for the Euler and Navier-Stokes equations

An efficient method-of-lines approach is presented for the Euler and Navier-Stokes equations. The governing equations are spatially discretized by a central finite-difference approximation. The rational Runge-Kutta scheme is used for the time integration. Attention is focused on improving the efficiency and accuracy of the solution. A remarkable improvement in the efficiency is achieved by adopting a combination of the present scheme with the residual averaging and multigrid (M.G.) techniques. The M.G. method and the high suitability of the present scheme to a vector computer partly reduce the computational load imposed on a numerical simulation with a finer grid. The steady-state convergence obtained with the scheme is comparable with those of diagonalized implicit approximate factorization schemes for inviscid and viscous flow equations. The reliability and accuracy of the scheme have also been improved by adopting the artificial dissipation terms scaled down to the minimum level required for stability. The facilities of the scheme are demonstrated in a series of numerical experiments for two- and three-dimensional transonic flows.     

Functional analysis of genes encoding putative oxidoreductases in Aspergillus oryzae, which are similar to fungal fructosyl-amino acid oxidase

We found 11 genes (FAO1-11) encoding putative oxidoreductases in the Aspergillus oryzae genome, which are similar to fungal fructosyl-amino acid oxidases. The cDNAs corresponding to the genes were cloned and expressed in Escherichia coli. rFao2 had fructosyl-amino acid oxidase activity, whereas rFao1 did not show any enzyme activity, even though the deduced amino acid sequence of Fao1 is identical to that of one of the fructosyl-amino acid oxidase isozymes from Aspergillus oryzae. rFao7 and rFao8 showed oxidase activity toward sarcosine, L-pipecolate, and L-proline. rFao10 was active toward only sarcosine, of the substrates tested. The functions of the other proteins were also predicted from a phylogenetic analysis.